tc electronic 400131 Rusty Fuzz Electric Guitar Effect User Guide
- June 6, 2024
- tc electronic
Table of Contents
tc electronic 400131 Rusty Fuzz Electric Guitar Effect
Controls
- Input/Output jacks – Connect a 1/4″ cable from your guitar to the INPUT jack, and connect a cable from the OUTPUT jack to your amplifier.
- 9 V DC – Connect a 9 V power supply (not included).
- Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
- Fuzz – Adjusts the amount of distortion.
- Volume – Adjusts the output level when the pedal is engaged.
- Tone – Adjusts the amount of high frequency contour for a brighter or rounder sound.\
Battery Replacement
Storage
Specification
Connectors
-
Input 1/4″ TS, unbalanced
-
Impedance >800 kΩ
-
Output 1/4″ TS, unbalanced
-
Impedance 1 kΩ
-
Power input standard 9 V DC, center negative, >100 mA
-
Battery option Internal 9 V battery connector
-
Current consumption <15 mA
Physical -
Dimensions (H x W x D) 58 x 74 x 132 mm (2.3 x 2.9 x 5.2″)
-
Weight 0.5 kg (1.1 lbs)
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>