global sources APP Silicone Mask Instruction Manual
- June 6, 2024
- global sources
Table of Contents
global sources APP Silicone Mask
Product information
- Product name: APP silicone mask Battery performance: polymer battery Screen size: 101*115mm
- Input voltage/current: 5V/1A
- Charging type: Type-c interface charging Charging time: 2-3 hours
- Use time: 6-8 hours
Technical features
- The rated capacity of this product is 450mAh.
- APP controls the LED display, you can DIY input, text, pattern, music rhythm, call reminders.
- Ultra-long life battery, up to 500 cycles or more.
- Use energy-saving, high-power, long-life LED lamp beads.
- Charging protection: The LED display shows the charging status of the battery pattern when charging, and it will go out automatically when it is fully charged.
Working principle: The LED lamp bead is powered by a battery and can be reused after charging. The LED mask is used with APP.
Operation
- Press and hold the switch button for three seconds to turn it on, and press and hold the switch button again for three seconds to turn off the power.
- This product needs to be used with APP.
- The first step, a long press to turn on the LED display and turn on the Bluetooth of the mobile phone;
- The second step is to open the APP page and click to connect to the device;
- In the third step, the device can be used together after it shows that the connection is successful;
Matters needing attention
- After fully charged, please cut off the power in time to protect the battery life.
- It is forbidden to use overcharged charging (9V/2A, 12V/2A, 5V/3A, etc.).
- Keep safe charging operation.
- Do not use this product when charging, so as not to burn the LED lights or the internal charging parts of the power supply.
INSTRUCTION
- Scan the QR code and install iBigMouthAPP.
- Open the APP and click on the link (keep Bluetooth and GPS turned on).
- Multiple Bluetooth devices can be connected at the same time.
- Enter the main page.
- The system comes with a pattern.
- The system comes with animation.
- DIY graffiti function, and can be saved.
- Add DIY animation and can save.
- Enter the content and save it to generate a DIY animation.
- Music rhythm mode.
- Microphone rhythm mode.
- Text editing can be saved.
FCC Statment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment