RELUEX RE-H616 Massage Chair User Manual
- June 6, 2024
- RELUEX
Table of Contents
RELUEX RE-H616 Massage Chair
PRODUCT SPECIFICATlON
Dimensions
Specification
Name of Product: Advanced Massage Chair
Voltage: AC220V,50/60Hz
Power: 160W
IMPORTANT SAFETY INSTRUCTION
Please read details in this booklet carefully and pay special attention to the
“Important safety instructions”. To ensure proper use please keep this booklet
for your reference.
(All information presented is as accurate as possible, but is subject to
change without notice, please check with the product. Our company reserves the
right of final explanation.)
WORK ENVIRONMENT
- Please do not use it in a moist environment to avoid the danger of an electric shock.
- Please do not use it in the heavy-dusty of caustic enviroment in order to avoid mechanical failure of eroding.
- Please do not use your chair if the room temperature is higher than 40 C.
- Please do not leave it outdoors. Please do not expose this machine to strong light, ultraviolet rays, sunshine or in close proximity to a heater.
- Please use your chair where there is enough space and good ventilation.
Please use and place it on the level of ground.This massage chair is intended for househould use only.
Caution:
Please do not user the machine immediately after the surrounding temperature changes sharply. Wait 30 minutes for the machine to reach the room temperature, then use it.
PEOPLE WHO ARE NOT SUITABLE TO USE THIS PRODUCT
-
If you are pregnant or have any health issues please consult your medical practitioner before using your chair.
WARNINGS: -
This appliance is not intended for use by persons ( including children) with reduce physical, sensory for mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. -
Chidren should be supervised to ensure that they do not play with the appliance.
-
Service and Repairs must be carried out by a suitably qualified person.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent of similarly qualified persons in order to avoid a hazard.
SAFETY ITEMS
- Please check your voltage is suitable before use.
- Please do not plug/unplug the power plug with wet hands.
- To avoid electric shock or short circuit do not spill liquid on the machine.
- Importantly, do not use this chair if some parts of your seat have moved.
- Please do not use in conjunction with other medical instruments or an electro-thermal blanket to avoid injury or inefficacy.
- Please do not use your chair within an hour after having a meal.
- Please do not place valuable things or heavy objects on this product to avoid mechanical failure and damage
- Please check that there is no perdon, pets and obstacles near the working massage chair to avoid any injury or mechanical problems.
- Please never put hands or feet into the slots so as to avoid any injury.
VOICE CONTROL FUNCTION
TROUBLESHOOTING
USING INSTRUCTIONS
-
Please check and make sure all the parts are in good condition and are firmly connected before use.
-
Please cut off the power immediately if water or other liquid has been spilt one the remote control or massage chair (especially PCB box)
-
Please cut off the power immediately when the covering cloth is broken (i.e.the built-in mechanism is exposed) and contact us for information.
-
Please cut off the power immediately if any abnormal phenomenon occurs, and contact us for information.
-
The time function can only stop the mechanical operation of your chair, please remember to turn off the power switch.
-
During a storm please turn off the power switch and disconnect the power line, please unplug the power plug SD card of U disc gently .
-
Please do not press, twist or pull the electrical wire forcibly.
If damage occurs, contact us for inspection/repair information. -
Please do not use this product if the sockets have loosened.
INSTALLATION AND MAINTENANCE
-
Please don ‘1 di assemble this product or touch the inner parts to avoid injury.
-
Only our service agents can repair this product under warranty, please do not disassemble and repair this product by yourself
CAUTION -
Please locate the backbone at the center of the chair, otherwise it may cause discomfort.
-
Please do not try to control the massaging balls to massage your head. That might not very comfortable.
-
Please ensure that the body is located in the right position while the massager is working. If the massaging balls go down, do not try to force them to return.
-
Please be careful not to fall asleep during your massage.
-
If sickness or pain is felt during use, stop using the massager and consult a doctor immediately.
-
Please do not use the massager more than 30 minutes each time.
NAME OF COMPONENTS
Remote controller guidance
- Connect the remote control in position 2.
- Connect the Power.
The leg assembly
- Connect the air hose and cable in position 3
- Put the Legrest in position 2 and Lock up.
PREPARATION BEFORE USE
ATTENTION
Please place this product on the level ground
As this product is very heavy, we suggest using carpet to avoid damaging the
floor. Take all products parts and accessory case from the package.
-
Movement
a. Short distance movement: push the backrest backward until you are balancing the machine on the cast/wheels, to move the massage chair.
-
Blue-Tooth Connection
First Step: Turn on massage chair
Second Step: Turn on the Blue-tooth function of Mobile phone, and then search for Massage chair Blue-tooth devices(RE-MOB).
Third Step: Play Music or Video on your Mobile Phone.
SMART KEY
NAME OF COMPONENTS
- Pillow
- Shoulder
- Back Cushuon
- Speaker
- Smart Key
- LED Linht
- Footrest
- Armrest
- Base
- RearCover
- PCBBox
- Switch
- Caster
REMOTE CONTROL INSTRUCTIONS
ON/ OFF
Press the power button to turn on the machine and press again to turn it off.
AUTO MODE
Cyclically press this key to select different automated programs. Total 10
sets auto massage programs.
MANUAL MODE
you can change the massage motion by keep pressing this button.
SHOULDER POSITION ADJUSTMENT
Press this button to adjust the highest position that the machanical
hands/rollers reach during your massage.
There are 2 options; Auto Adjustment
This massage chair has a scan function: when you start a program (such as
Recovery), the mechanical massaging hands will scan your shoulder position for
a few seconds.Please note: to avoid an error in the scanning process (scanning
the incorrect shoulder position) Sit up straight when you first set your
massage program. Manual adjustment.After auto body scan, if you think the
massage rollers can not reach your desire neck possition, please adjust
massage rollers using this button in the process of massage programme in 15
minutes, then massage rollers can reach as far as
the position as you have set.
HEATING
Press this button to turn on/off heating function increase or decrease
temperature by
AIRBAG
Press this button to turn on/off all of the airbags
FUNCTION SELECTION
Press”Menu”into menu bar, you can adjust airbag intensity, Massage rollers
Speed, etc.
LEG UP
Hold this button to rise the leg rest. if you release the button, it will
stop.
LEG DOWN
Hold this button to get the leg rest back. if you release the button,it will
stop.
BACK UP
Hold this button to rise the backrest, if you release the button, it will stop
BACK DOWN
Hold this button to tilt-back this chair, if you release the button, it will
stop.
ZERO-GRAVITY
Press this button once, this Massage Chair will get into Zero Gravity
condition. Press this button twice, this Massage Chair will get into Normal
condition.
FOOT ROLLERS
Press this button to turn on/off the foot rollers
SETTING TIME
Press this button to change working time, 15 minutes, 20 minutes and 30minutes
FUNCTION PAUSE
During the massage proces , press this key, the massage chair will stop
working, press again, will resume working.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>