K-ARRAY KT2 – KT2-HV Tornado Multi-Purpose 2 Inch Point Source Loudspeaker User Guide

KT2 – KT2-HV
Tornado Multi-Purpose 2 Inch Point Source Loudspeaker
User Guide

Ver. 2.8
Tornado
KT2 – KT2-HV
KT2C – KT2C-HV
KTL2 – KTL2-HV
KTL2C – KTL2C-HV
USER GUIDE

NEW
All Tornado models are also available in a 70V version! See Paragraph 9.1 for details.
Tornado

SYMBOLS

K-array declares that this device is in compliance with applicable CE standards and regulations. Before putting the device into operation, please observe the respective country-specific regulations!
WEEK
Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling center for equipment.
This symbol alerts the user to the presence of recommendations about the product’s use and maintenance.
Warning!
Dangerous voltages: RISK of electric shock. Terminals marked with this symbol are HAZARDOUS LIVE and the external wiring connected to these terminals requires installation by a qualified professional or the use of ready-made leads or cords.
This symbol alerts the user to the presence of recommendations about the product’s use and maintenance.
This device complies with the Restriction of Hazardous Substances Directive.

INTRODUCTION

The Tornado series is a miniature sound source designed for high-quality distributed systems. Housed in a compact aluminum enclosure, the Tornado is suitable for space-sensitive and architectural design installations.
The Tornados are a turn-key loudspeaker solution; designed as passive speakers, they can be easily converted into self-powered devices by inserting the KA1-T2H, 12V/24V amplifier module. All Tornado models are also available in a 70V version that can be powered with up to 100 units by a single KA84 amplifier channel and up to 50 units by two bridged KA24 amplifier channels. Tornados have a proprietary 2″ high-efficiency drive unit with a neodymium magnet structure and a suspension engineered for maximum linear excursion and minimum residual transducer interference. The cone transducer delivers an impressive maximum peak SPL of 107dB and has a wide operating frequency range from 150 Hz to 18 kHz with very low distortion. In addition to the standard features of the Tornado loudspeakers, the KTL2 and KTL2C have 7 integrated RGB LEDs that can be controlled thanks to the wide range of K-array accessories via DMX or by remote. With its ability to effortlessly reproduce speech, music, and lighting, it is an excellent choice for fixed applications such as theatres, museum displays, restaurants, portable systems for corporate AV presentations, department stores, and in hidden locations such as chancel steps in houses of worship. The KT2 and KTL2 come with a wall bracket for fixed installations or surface applications. The KT2C and KTL2C come with ceiling brackets for ceiling mounts.
All Tornado components are designed by the K-array R&D department and custom- made under the K-array quality control system.

KEY FEATURES

• High performance-to-size ratio
• Single 2″ long-excursion full-range driver
• Integrated RGB LEDs (only KTL2 and KTL2C)
• Wide-range frequency response
• Integrated 4-pin Phoenix connector
• Double voice-coil driver for variable impedance 8-32
• 70V version available
• Compact aluminum ultra-strong chassis
• Weather-resistant IP54 (only KT2 and KT2C)

OPTIONAL FEATURE

A self-powered device using the KA1-T2H amplifier module (see Chapter 11)

APPLICATIONS

• Audio for museum and exhibit displays
• Space-sensitive fills and distributed systems for speech and music
• Restaurants, clubs, pubs
• Department stores
• Installed audio-visual systems

SAFETY INFORMATION

Read these instructions – Keep these instructions – Heed all warnings
WARNING

• Install the speaker only in a location that can structurally support the weight of the unit. Doing otherwise may result in the unit falling down and causing personal injury and property damage.
• Professional loudspeakers are capable of producing extremely high sound levels and should be used with care. Hearing loss is cumulative and can result from levels above 90dB if people are exposed for an extended period.
• Do not operate the speaker for an extended period of time with the sound distorting. This is an indication of malfunction, which in turn can cause heat to generate and result in a fire.
• Never stand close to loudspeakers driven at a high level.
• Suspending the system should only be done by qualified personnel following safe rigging practices.
• Secure fixings to the building structure are vital. If in any doubt, seek help from architects, structural engineers or other specialists.
• No naked flame sources such as lighted candles should be placed near the device.
• Do not attempt to disassemble the unit. The unit contains no user-serviceable parts. Repairs should be performed only by factory-trained service personnel.

CAUTION

• Choking Hazards. This device contains small parts, which may present a choking hazard to small children. Keep the device and its accessories away from small children.
• It is important that loudspeaker systems are used in a safe manner.
• Do not make repairs yourself. Do not open the device, it contains potentially hazardous voltage. Never attempt to disassemble, repair or modify the system yourself. Disassembling the unit may cause damage that is not covered under the warranty. The device contains no user-serviceable parts. Repairs should only be performed by factory-trained service personnel.

UNPACKING

Each K-array amplifier is built to the highest standard and thoroughly inspected before leaving the factory. Upon arrival, carefully inspect the shipping carton, then examine and test your new amplifier. If you find any damage, immediately notify the shipping company. Only the consignee may institute a claim procedure regarding the system’s electronic equipment.

INCLUDED ACCESSORIES

1 x M5 turned steel thumb nut
1 x 4-pin Phoenix connector
1 x Double threaded screw
1 x Nylon anchor 6x30mm
1 x Jumper cable| 1 x 4-pin Phoenix connector
1 x Double threaded screw| 1 x M5 turned steel thumb nut
2 x 4-pin Phoenix connector
1 x Double threaded screw
1 x Nylon anchor 6x30mm
1 x Jumper cable| 2 x 4-pin Phoenix connector
1 x Jumper cable

PHYSICAL

REAR PANEL AND WIRING

9.1 70V VERSION

All Tornados are available also in the 70V version: KT2-HV, KT2C-HV, KTL2-HV, KTL2C-HV. The very high impedance of the speakers allows to drive up to 100 units by a single KA84 amplifier channel and up to 50 units by two bridged KA24 amplifier channels.

INSTALLATION
ACCESSORIES

DID YOU KNOW THAT …. Designed as a passive speaker, the new Tornados can be easily converted into self-powered devices by inserting the KA1-T2H amplifier module.

| KA1-T2H| Amplifier module for Tornados (32 W)
---|---|---
| K-AL15| 15 W power supply
for 1 KA1-T2H (in background music or speech applications)
| <-AL66| 66 W power supply
for up to 2 KA1-T2H (full power) or up to 4 KA1-T2H (in background music or speech applications)
| K-AL75| 75 W DIN rail power supply
for up to 3 KA1-T2H (full power) or up to 6 KA1-T2H (in background music or speech applications)
| -AL120| 120 W DIN rail power supply
for up to 5 KA1-T2H (full power) or up to 10 KA1-T21-1 (in background music or speecr applications)
and for K-RGBDMX / KRGBREM RGB LED controller for KTL2 and KTL2C
| K-AL240| 240 W DIN rail power supply for up to 12 KA1-T2H (full power) or up to 24 KA1-T2H (in background music or speech applications) and for K-RGBDMX / KRGBREM RGB LED controller for KTL2 and KTL2C
| K-CTRL| 60 W RGB LED DMX Controller for up to 4 KTL2s or KTL2Cs
| K-RGB DMX| RGB LED DMX Controller
for up to 10 KTL2s / KTL2Cs (using the K-AL120) or up to 20 (using the K-AL240)
| K-RGB RAM| RGB LED Controller with remote control
for up to 10 KTL2s / KTL2Cs (using the K-AL120) or up to 20 (using the K-AL240)
| KA-FRAME| 2U Rack Adapter for 4 K-CTRLs

11.1 KA1-T2H WIRING

SERVICE

To obtain service:

1. Contact the official K-array distributor in your country. Your local distributor will direct you to the appropriate service center.
2. If you are calling for service, please have the serial number(s) of the unit(s) available for reference. Ask for Customer Service, and be prepared to describe the problem clearly and completely.
3. If the problem cannot be resolved over the phone, you may be required to send the unit in for service. In this instance, you will be provided with an RA (Return Authorization) number which should be included on all shipping documents and correspondence regarding the repair. Shipping charges are the responsibility of the purchaser.

Any attempt to modify or replace components of the device will invalidate your warranty. Service must be performed by an authorized K-array service center.
Cleaning: Use only a soft, dry cloth to clean the housing. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. Do not use any sprays near the product or allow liquids to spill into any openings.

SPECIFICATIONS

KT2 – KT2C – KT2-HV – KT2C-HV

Power handling
Frequency range
Impedance
Maximum SPL
Horizontal
Vertical
Type
Frequency| ACOUSTICS18 W(AES)
150 Hz – 18 kHz (-10dB)(1)
KT2, KT2H: 8 Ω / 32 Ω (selectable)
KT2-HV, KT2C-HV: High Impedance for 70V amp
101 dB (cont.) – 107 dB (peak)(2)
COVERAGE90° 90°
CROSSOVER External Crossover required
150 Hz, 24 dB/oct suggested minimum
---|---
Full range
Connector
TypeIP
Dimensions
Weight| TRANSDUCERS
2” Neodymium magnet woofer with 2 x 0.8” voice coils
POWER AUDIO INPUT 4-pin Phoenix
RECOMMENDED AMPLIFIERS
KA1-T2H, KA14, KA24, KA84 CERTIFICATION
54
PHYSICAL KT2 ………. KT2C
74 mm x 123 mm x 118 mm(2.9“ x 4.8” x 4.6“) 125 mm x 125 mm x 119 mm
(4.9“ x 4.9” x 4.7“) 0.56 kg (1.23 lbs) 0.67 kg (1.48 lbs)

Notes for data

1. With dedicated preset;
2. Measured with the musical signal

New materials and designs are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this datasheet.

Power handling
Frequency range
Impedance
Maximum SPL
Horizontal
Vertical
Type
Frequency
Full range
Connector| ACOUSTICS
18 W(AES)
150 Hz – 18 kHz (-10dB)(1)
KT2, KT2H: 8 Ω / 32 Ω (selectable)
KT2-HV, KT2C-HV: High Impedance for 70V amp101 dB (cont.) – 107 dB (peak)(2)
COVERAGE
90°
90°
CROSSOVER
External Crossover required150 Hz, 24 dB/oct suggested minimum
TRANSDUCERS
2” Neodymium magnet woofer with 2 x 0.8” voice coils
POWER AUDIO INPUT 4-pin Phoenix
---|---
Type Type
Connector
Light Output
Viewing Angle
Consumption
IP
Dimensions
Weight| RECOMMENDED AMPLIFIERS
KA1-T2H, KA14, KA24, KA84 LED
7 x RGB LED
4-pin Phoenix
Black version: 330 lumen
White version: 400 lumen
90°
10 W CERTIFICATION
40 PHYSICAL
KTL2 KTL2C
74 mm x 123 mm x 118 mm (2.9“ x 4.8” x 4.6“)
125 mm x 125 mm x 119 mm (4.9“ x 4.9” x 4.7“)
0.54 kg (1.2 lbs) 0.59 kg (1.3 lbs)

Notes for data

1. With dedicated preset;
2. Measured with the musical signal

New materials and designs are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this datasheet.
KA1-T2H ACCESSORY
DesigneD as passive speakers, the new tornaDos can be easily converted into self-powereD Devices by inserting the ka1-t2h 12v/24v amplifier moDule.

Connectors
Wiring
Connectors
Wiring Type
Nominal
Power
Output
Protections
Frequency response
THD+N 1kHz,1 W| AUDIO INPUT
Phoenix connector
IN – (-) IN + (+) GRD (Ground)
POWER INPUT
Phoenix connector
VCC (+) GND (common)
AMPLIFIER
1 Module Class D Electronically Processed
32 W @ 8 Ω 1% THD + NOISE (1 )
Dynamic limiter, over current, over temperature,
short circuit power supply polarity inversion
20Hz – 20kHz (+/- 3 dB) for 1W @ 8 Ω
0,100%
---|---
Nominal voltage
Operating range
I. Nom.
Efficiency
Nominal power
Dimensions
Weight| DC POWER
12/24 Vdc
10 – 26 Vdc
0.4 A / 24 Vdc CONSUMPTION
83%
10 W
PHYSICAL 35 mm x 40 mm x 14 mm (1,37“ x 1,57” x 0,55 “)
40 g (0.08 lb)

Notes for data
1. EIAJ Test Standard, 1 kHz, 1%THD
New materials and designs are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this datasheet.
KT2 AND KT2C EN54-24 DATA

Power handling
SPL 1W/1m
Maximum SPL
Connector IN
Vmax In (Pink Noise)
Frequency Range
Coverage Horizontal
Coverage Vertcal| 15 W
89 dB
100 dB Voice coil A: 1+ 1Voice coil B: 2+
2Double coil: 1+ 2- (1-  + CC)
8.20 V @ 8 Ohm ,16.40 V @ 32 Ohm
150 Hz – 18 kHz 180° @ 500 Hz
180° @ 1000 Hz,180° @ 2000 Hz 120° @ 4000 Hz
180° @ 500 Hz 180° @ 1000 Hz
180° @ 2000 Hz 120° @ 4000 Hz
---|---
|
---|---
K-array
0068-CPR-082 /2017| K-array
0068-CPR-082 /2017
EN 54-24 : 2008
Loudspeaker for voice alarm systems for fire detection and fire alarms systems for buildings
KT2 TYPE B| EN 54-24 : 2008
Loudspeaker for voice alrm systems for fire detection and fire alarms systems for buildings
KT2C TYPE B

The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>