K-ARRAY Azimut-KAMUTII Portable Smart System with Multi-Channel Amplifiers User Guide

K-ARRAY Azimut-KAMUTII Portable Smart System with Multi-Channel

Amplifiers

Product Information

The Azimut-KAMUT II is a portable smart system with multi-channel amplifiers. It is designed and made in Italy by K-ARRAY surl. The amplifier is equipped with various input and output options, including USB ports, an RJ45 Ethernet port, Euroblock balanced analog inputs, a stereo analog input, optical S/P DIF stereo digital input, and speaker connectors for flying plugs. The amplifier also features a status LED, a reset button, a DC inlet for power, and a power switch. The system includes the Kommander-KA amplifier, which is factory configured to drive the Lyzard-KZ or Vyper-KV passive loudspeakers and Rumble or Truffle subwoofers at maximum power.

The system can be managed and controlled wirelessly using the dedicated K-array Connect app on a mobile device (smartphone or tablet). The package includes the K-REMUCTRL remote, which has various controls for power, play/pause, mute, Bluetooth pairing, skip forward/backward, volume adjustment, and a micro-USB port for recharging.

Product Usage Instructions

1. Before using the product, carefully read the owner’s manual and safety instructions.
2. Download the owner’s manual and safety instructions from the official K-array website at www.k-array.com.
3. Inspect the shipping carton and the product for any damage. If any damage is found, immediately notify the shipping company.
4. Check that all the supplied parts are included with the product, including the K-REMUCTRL remote.
5. Connect the power adapter to the power cord.
6. Connect the power plug to a mains socket outlet.
7. Connect the power adapter to the DC inlet on the rear panel of the amplifier.
8. Switch on the amplifier and the K-REMUCTRL remote. Note that the remote dongle is already plugged into one of the USB ports of the amplifier.
9. Use the controls on the K-REMUCTRL remote to manage and control the system, such as powering on/off, playing/pausing songs, muting the output signals, adjusting volume, and skipping songs.
10. To manage and control the amplifier wirelessly, download and install the K-array Connect app on a mobile device. Follow the instructions provided in the app to connect and control the amplifier.
11. If the battery level of the K-REMUCTRL remote is low (approximately 10% remaining life), recharge it using the micro-USB port.

If you have any questions or need further assistance with your the new device, please contact K-array customer service at support@k-array.com or reach out to the official K-array distributor in your country.

Azimut-KAMUT II

Portable smart system with Multi-Channel Amplifiers

Thank you for choosing this K-array product!
To ensure proper operation, please carefully read this quick guide. Download the owner’s manual and safety instructions from the official K-array website at www.k-array.com:

Before using the product please carefully read the owner’s manual and safety instructions. After reading this quick guide, be sure to keep it for future reference. Should you have any questions about your new device please contact K-array customer service at support@k-array.com or contact the official K-array distributor in your country. The Kommander-KA amplifier in the Azimut system is factory configured with the settings necessary to drive the Lyzard-KZ or Vyper-KV passive loudspeakers and Rumble or Truffle subwoofers, in order to fulfill the maximum power of each output channel.

Software

The dedicated K-array Connect app allows to direct manage and control an amplifier with a mobile device (smartphone or tablet) wireless. Carefully inspect the shipping carton, then examine and test your new device. If you find any damage, immediately notify the shipping company.

Check that the following parts are supplied with the product:

• 1x This quick guide
• 1x Kommander-KA02 I comprising:
  • 2x Euroblock 2,5/ 2-ST-5,08 speaker connectors
  • 1x Euroblock 2,5/ 4-ST-5,08 speaker connectors
  • 4x Euroblock 1,5/ 3-ST-3,81 input connectors
  • 1x Power supply with power cord
• 1x K-REMUCTRL remote
• 1x subwoofer cable with Euroblock connectors
• One of the following loudspeakers set according to the version:

K-REMUCTRL remote

Switch on the amplifier and the K-REMUCTLR remote. Please note that the remote dongle is already plugged into one of the USB ports of the amplifier.

The K-REMUCTRL remote includes a high-efficiency rechargeable battery with a switch that can extend the batter life when powered off. When the battery discharges to approximately 10% remaining life, the Status LED on the remote begins flashing.

Amplifier Rear Pannel

1. 4x USB ports
2. RJ45 Ethernet port
3. 4 channels Euroblock 1,5/ 3-ST-3,81 balanced analog inputs
4. 3,5 mm jack unbalanced stereo analog input
5. Status LED
6. 4 channels Euroblock output terminals: speaker connectors for either 2,5/ 2-ST-5,08 or 2,5/ 4-ST-5,08 flying plugs
7. Reset button
8. Optical S/P DIF stereo digital input
9. DC inlet
10. Power switch

AC mains supply

• Connect the power adapter to the power cord;
• Connect the power plug to a mains socket outlet;
• Connect the power adapter to the DC inlet on the rear panel of the Kommander-KA02 I amplifier unit.

Once properly plugged, switch on the amplifier pushing on the power button: when the unit is operating the front and back LEDs light on green.

Input wiring

Audio signals can be fed to the system using the input connectors on the amplifier’s rear panel.

Loudspeakers Wiring

Plug the 2 poles connector heading the loudspeaker’s cable to the amplifier’s output connectors 3 (LEFT CHANNEL) and 4 (RIGHT CHANNEL).

Subwoofer Wiring

The cables for connecting the subwoofer to the amplifier is provided within the package. Plug the 4 poles connector heading the cable to the amplifier’s output connectors 1 and 2.

Installation

Suggested Loudspeaker placements.

Remote Connectivity
The Kommander-KA02 I amplifier unit features a built-in hot spot establishing a local Wi-Fi network dedicated to remote control the amplifier with mobile devices. The default local Wi-Fi SSID and unit IP address are printed on a label located on the bottom plate of the Kommander-KA02 I unit; a QR code for ease the connectivity is printed as well. The RJ45 Ethernet port on the rear panel allows to connect the Kommander-KA02 I amplifier unit to a local area network (LAN). Since every host on a network must be identified by a unique IP address, the simplest local network usually implement a router/switch with DHCP server managing the addresses allocation: by default the Kommander-KA02 I unit is set to obtain a local IP address from the DHCP server. A static IP address can be assigned to the amplifier unit using the amplifier’s embedded web app (Network menu).

Connectivity Reset
With the unit switched on, keep pressed the RESET button on the rear panel for 10 to 15 seconds in order to:

• Revert the wired IP addressing to DHCP;
• Activate the built-in Wi-Fi and reset the wireless parameters to the default SSID name and password.

Getting Started With K-array Connect

1. Power up the unit.
2. Hold your mobile device (smartphone or tablet): ensure the Wi-Fi connectivity is on.
3. Launch the K-array Connect app.
4. If the list of available devices is empty touch the SCAN QR CODE button and use the mobile device camera to frame the QR code printed on a label on the unit chassis: this provides the mobile device to connect to the amplifier’s built in hot spot.
5. Click on the image of the unit to start managing the amplifier with the K-array Connect app or click on the button with the globe in order to access its embedded web app.

In case you need to connect manually connect to the amplifier’s hot spot, the default password is the device serial number, e.g. K142AN0006 (case sensitive).

Status LED

Specifications

18 kHz

| 500Hz

18 kHz

| 150Hz

18 kHz

Max SPL 2| 86 dB| 98 dB| 108 dB
Impedance| 16Ω| 16Ω| 8Ω/16Ω
Dimensions| 22 x 37 x 11 mm

(0.9 x 1.5 x 0.4 in)

| 22 x 100 x 11 mm

(0.9 x 3.9 x 0.4 in)

| 40 x 260 x 22 mm

(1.6 x 10.2 x 0.9 in)

Weight| 0.021 kg (0.046 lb)| 0,059 kg (0.130 lb)| 0,4 kg (0.88 lb)
 | KTR24| KTR25| KTR26| KU44-2
---|---|---|---|---
Rated Power| 60 W| 80 W| 100 W| 100 W
Frequency response 1|

45-500 Hz

|

45-500Hz

|

45-150Hz

|

45-500Hz

Max SPL 2| 112 dB| 115 dB| 120 dB| 116 dB
Impedance| 4Ω| 4Ω| 2Ω| 2Ω
Dimensions| 122 x 117 x 199 mm (4.8 x 4.6 x 7.8 in)| 152x147x258mm (6.0 x 5.8 x 10.2 in)| 182x176x341mm (7.1 x 6.9 x 13.4 in)| 500x116x100mm (19.7 x 4.6 x 4.0 in)
Weight| 1,5 kg (3.31 lb)| 2,5 kg (5.51 lb)| 3,5 kg (7.72 lb)| 5.9 kg (13.0 lb)
 | KA02 I
---|---
Output channels| 4
Output Power per ch @4Ω 3| 50W
Dimensions| 219 x 46 x 170 mm (8.6 x 1.8 x 6.7 in)
Weight| 0,7 kg (1.5 lb)

1. With dedicated preset.
2. Maximum SPL is calculated using a signall with crest factor 4 (12dB) measured at 8 m then scaled at 1 m.
3. CTA-2006 (CEA-2006) Amplifier Power Standards, single channel driven.

References

• Fintech Financial Solutions | Array

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>