STITCH 33048 Wireless Smart Window/Door Sensor User Manual
- June 6, 2024
- STITCH
Table of Contents
33048 Wireless Smart Window/Door Sensor
User Manual
INTRODUCTION
This Wireless Smart Door/Window Sensor allows you to remotely monitor your home using your Android” or iOS® smartphone or tablet. The sensor communicates with your phone through your local Wi-Fi® network, so you won’t need any separate mesh network hubs or controllers. Mount it to a door, window, or another entryway to detect when it is opened or closed and receive notification directly to your mobile devices.
FEATURES
- Provides simple 24/7 remote monitoring of your home and entry points
- Set push notifications to your mobile devices and be alerted whenever your window is opened or closed
- Reports battery level and logs events
- Auto-power saving mode enables under normal working conditions
- Supports scene control and works with other “smart” devices
- Works with other STITCH by Monoprice smart devices (sold separately)
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5 am-7 pm PT, Sat-Sun: 9 am-6 pm PT) or via email at support@monoprice.com
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the
items listed below. If anything is missing or damaged, please contact
Monoprice Customer Service for a replacement. Note that the 33049 version is a
2-pack version of 33048, so will contain twice as many of each item listed
here.
lx Door/Window Sensor
lx Magnet
4x Screws
lx Adhesive Tape for Sensor
lx Adhesive Tape for Magnet
2x AAA Batteries
lx User’s Manual
APPLICATIONS
Attach the device to windows, doors, gates, garage doors, drawers, mailboxes, and even your refrigerator to be the first to know the statuses of your entryways.
PRODUCT OVERVIEW
PHYSICAL INSTALLATION
-
Determine the mounting location. Note that the arrow on the magnet should be situated next to the arrow on the sensor with no more than a 0.4″ (10mm) gap between the sensor and the magnet. Use a pencil to mark the locations. Ensure that the surfaces inside the marked locations are clean and free of dust and finger oils. The sensor should be placed indoors and away from water and other extreme weather conditions.
-
Using a small flat-head screwdriver, remove the cover from the magnet, as shown in the image to the right.
-
If you will be mounting the magnet with screws, use two of the provided screws to secure the magnet back to the wall at the desired location previously marked. Otherwise, peel the protective film from one side of one of the included adhesive tape pieces and attach it to the back of the magnet backplate, then remove the other protective film and secure the magnet backplate to the wall at your desired location.
-
Reinstall the cover on the magnet body.
-
Press the latch button on the sensor and remove the sensor backplate from the main sensor body.
-
If you will be mounting the sensor with screws, use two of the supplied screws to secure the sensor backplate to the wall, window, window frame, door, or door frame at the marked location. Alternatively, peel the protective film from one side of one of the included adhesive tape pieces and attach it to the back of the sensor backplate, then remove the other protective film and secure the sensor backplate and tape at your desired location.
-
Insert the two included AAA batteries into the battery compartment on the main sensor body, taking care to match the polarity, then reinstall the main sensor body onto the sensor backplate.
APP INSTALLATION AND LOGIN
-
Download and install the free STITCH by Monoprice app from Google Play™ or the App Store. Scan one of the two QR codes below to go directly to the appropriate app store.
https://play.google.com/store/apps/details?id=com.monoprice.stitch
https://itunes.apple.com/us/app/stitch-by-monoprice/id1404140733?mt=8 -
Once it has been installed, launch the app.
-
If you have already used the STITCH app, tap the Login button, then enter your STITCH account information. If you have not installed and used the STITCH app before, proceed to app registration. You can register using your phone number or by using your email address. Follow the on-screen app instructions for more details.
Note that the password must contain 6-20 characters and must include at least one number.
ADD A DEVICE
Smart Inclusion Installation
Smart Inclusion is the default mode for installing your device. It uses your
wireless network to communicate between your smartphone and the smart device.
If you do not have a Wi-Fi® network or do not wish to include the sensor in
your network, see the AP Mode Installation section.
-
Tap + on the Add Devices screen to add a new device.
-
Scroll through the list and select Door Sensor or Window Sensor to add your new device to the STITCH app.
-
The LED indicator should be flashing red rapidly, indicating that it is ready to be paired with your network. Tap Confirm on the app to continue, input the password to your wireless network, then tap Confirm again.
-
The app will start connecting to the device. Tap Done once it is completed.
-
If the LED is not flashing red rapidly, open the cover and hold the Setup button for 5 seconds. The LED will flash red rapidly, indicating the device has been successfully reset.
AP Mode Installation
AP mode differs from Smart Inclusion mode in that it does not use your Wi-Fi® network to manage the communications between your smartphone and the device. Instead, it connects your phone’s Wi-Fi directly to the device’s built-in hotspot network.
-
Launch the STITCH by Monoprice app.
-
Tap + on the Add Devices screen to add a new device.
-
Scroll through the list and select Door Sensor or Window Sensor to add your new device to the STITCH app.
-
Tap AP Mode at the top right.
-
The LED should be slowly blinking, indicating that it is ready to be added in AP mode. If it does begin blinking slowly, tap Confirm on the app to continue, input the password to your wireless network, then tap Confirm again.
-
In the wireless settings on your phone, select the Stitch-XXXX entry, then tap Connect Now to continue. The app will begin connecting to the device.
APP FEATURES
- Check closed and open statuses
- Check battery levels
- Review event history and logs
- Set device notifications
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com during regular business hours, 7 days a week. You can also get assistance through email by sending a message to tech@monoprice.com
SPECIFICATIONS
| Radio Frequency | 2.4 — 2.484 GHz |
|---|---|
| Supported Network Protocols | IEEE802.11 b/g/n |
| Power Source | 2x AAA batteries |
| Transmitting Power | 802.11b: 20dBm ±2dBm @1Mbps 802.11g: 14dBm ±2dBm @ 54Mbps |
802.11n: 14dBm ±2dBm @ MCS7_HT20
Receiving Sensitivity| 802.11b: -91dBm @ 11Mbps 8% PER 802.11g: -75dBm @
54Mbps 10% PER 802.11n: -72dBm @ MCS7_HT20 10% PER
Operating Temperature| +14 — +104°F (-10 — +40°C)
Storage Temperature| -40 — +158°F (-40 — +70°C)
Storage Humidity| 8 — 80% RH, non-condensing
Sensor Dimensions| 3.0″ x 1.1″ x 0.7″ (75 x 28 x 18 mm)
Magnet Dimensions| 3.0″ x 0.5″ x 0.7 (75 x 12 x 18 mm)
REGULATORY COMPLIANCE
Notice for FCC
Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
RF Exposure Statement for FCC
**Caution**
This equipment complies with radiation exposure limits set forth for an
uncontrolled environment. End-users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must be
at least 20 cm from the user and must not be collocated or operated in
conjunction with any other antenna or transmitter.
Notice for Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference basis with other
devices operating at this frequency. Any changes or modifications to said
product not expressly approved by Monoprice, including the use of non-approved
antennas, could void the user’s authority to operate this device.
This device complies with IC RSS-210. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
RF Exposure Statement for Industry Canada
Caution
This equipment complies with radiation exposure limits set forth for an
uncontrolled environment. End-users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must be
at least 20 cm from the user and must not be collocated or operated in
conjunction with any other antenna or transmitter.
Android™ and Google Play™ are trademarks of Google LLC.
Cisco® and IOS® are registered trademarks or trademarks of Cisco Systems, Inc.
and/or its affiliates in the United States and certain other countries.
Wi-Fi® is a registered trademark of Wi-Fi Alliance.
Need Help? We’re here for you! Contact us:
www.monoprice.com/contactus
Product pictures are for reference only. Specifications described herein are
subject to change without prior notification. All trademarks are the sole
property of their respective companies. Stitch is a Sub-Brand for Smart Home
of Monoprice.
Copyright © 2018 Monoprice, Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>