signia 650003 TV Transmitter User Guide

signia 650003 TV Transmitter

Before you start
The transmitter is an accessory for our remote controls with audio streaming capability. The transmitter connects TV, stereo, or MP3 player as well as many other electronic devices without Bluetooth®* functionality to the remote control for your hearing instruments. Using the transmitter you will wirelessly stream sounds directly into the hearing instruments.

CAUTION
Read this user guide thoroughly and completely and follow the safety information in this document to avoid damage or injury.

• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Signia GmbH is under licenses. Other trademarks and trade names are those of their respective owners.

Included in delivery

•  Transmitter
•  Power plug with different adapters
•  USB power cable
•  Audio cable with 3.5 mm stereo plugs
•  Adapter RCA (cinch) to 3.5 mm stereo socket
•  TOSLINK cable

Components

1. On/off button
2.  LED status indicator (green, blue, orange)
3.  Volume buttons
4. TOSLINK connection
5.  Connection for standard line-in devices with 3.5 mm audio jack
6.  USB port for power supply

Getting started

Connecting to power supply

NOTICE
Please make sure that the power plug is easily accessible to remove it from power supply if necessary.

Only use the USB power cable and power adapter that came with the device. Select the adapter that is used in your country.

• Connect the micro USB side of the USB power cable to the transmitter ➊.
•  Connect the other side of the USB power cable to the power plug ➋.
•  Connect the power plug to the power supply ➌.

Connecting to audio devices

Use the supplied cables and adapters.

Further information:

•  When using the TOSLINK cable:

•  Before connecting the cable, remove the protection caps from the TOSLINK cable plugs.

•  To prevent the TOSLINK cable from breaking, do not forcefully bend it.

•  Set the output format of the TV or audio device to “uncompressed PCM audio” (PCM = pulse-code modulation).
  Compressed audio format (like surround sound) is not supported by the transmitter. This will be indicated by a flashing orange LED .

• If the two inputs of the transmitter are connected to different audio devices, the device connected via TOSLINK cable has the higher priority and the audio signal of this device will be streamed to your hearing instruments. The audio signal of the other device will not be streamed.

Pairing the transmitter
The remote control for your hearing instruments has to be paired once with the transmitter.

• Follow the instructions in the remote control’s user guide.

Daily use

Using the transmitter

• Check if the green LED shines  (transmitter is  turned on and ready for audio streaming).
  If the green LED is off, press power button  to turn the transmitter on.

•  To start audio streaming, use the remote control for your hearing instruments: Set up the remote control for your hearing instruments so that audio streaming with our transmitters is active. Follow the instructions in the remote control’s user guide.
  When the blue LED shines , audio streaming is active.

•  To adjust the volume of the streamed audio signal, press (volume up) or (volume down) on the transmitter.
  You can also adjust the volume with the remote control for your hearing instruments or with the controls of your hearing instruments.

• If you intend not to use the transmitter for a longer period of time, you can turn it off by pressing power button

LED status indication

The orange LED shows the status of the TOSLINK connection.

Important safety information

Personal safety

WARNING
Choking hazard!
Your device contains small parts which can be swallowed.

•  Keep hearing instruments, batteries and accessories out of reach of children and mentally disabled persons.
• If parts have been swallowed consult a physician or hospital immediately.

WARNING
Risk of electrical shock!

• Do not use obviously damaged devices and return them to point of sale.

WARNING
Note that any unauthorized changes to the product may cause damage to the product or cause injury.

• Use only approved parts and accessories. Ask your Hearing Care Professional for support.

WARNING
Risk of electric shock!

• Connect audio input only to a device conforming to IEC 60065, the IEC-Norm for audio, video and other electronic devices.

WARNING
Interference with implantable devices

•  The device can be used with all electronic implants that comply with the ANSI/AAMI/ISO 14117:2012 Electromagnetic compatibility standard for human implants.
• In case your implant does not comply with the ANSI/AAMI/ISO 14117:2012 standard, consult the manufacturer of your implantable device for information about the risk of disturbance.

WARNING
This device may interfere with measuring and electronic equipment.

• Do not use your device on airplanes or areas where sensitive or life-supporting electronic equipment is used.

WARNING Risk of explosion!

• Do not use your device in explosive atmospheres (e. g. in mining areas).

Product safety

• NOTICE
  Protect your devices from extreme heat.
  Do not expose them to direct sunlight.

• NOTICE
  Protect your devices from high humidity.

• NOTICE
  Do not dry your devices in the microwave oven.

• NOTICE
  Different types of strong radiation, e. g. during X-ray or MRI head examinations, may damage devices.
  Do not use the devices during these or similar procedures.
  Weaker radiation, e. g. from radio equipment or airport security, does not damage the devices

In some countries restrictions for the usage of wireless equipment exist.
Refer to local authorities for further information.

NOTICE
Your hearing instruments are designed to comply with international standards on electromagnetic compatibility but interference with nearby electronic devices could occur. In this case, move away from the source of interference.

Maintenance and care

NOTICE

•  Do not put your device in water!
•  Do not clean your device with alcohol or benzine.
•  Clean the device as necessary with a soft tissue.
•  Avoid abrasive cleaning liquids with additives such as citric acids, ammonia, etc.

Disposal information
Recycle devices, accessories and packaging according to local regulations.

Conformance information

The CE mark indicates conformity with the following

European directives:

•  2014/30/EU concerning electromagnetic compatibility
•  2014/35/EU concerning electrical equipment designed for use within certain voltage limits
•  2014/53/EU (RED) concerning radio equipment
•  2011/65/EU RoHS concerning the restriction of hazardous substances

Wireless functionality
FCC: QWOB8Z869
IC: 4460A-B8Z869

FCC and ISED compliance information can be found on the back of the device.
The ACMA compliance mark indicates conformity with the electromagnetic interference standards set bythe Australian Communications and Media Authority (ACMA).

Devices with the FCC marking comply with the standards of the FCC regarding electromagnetic interference.
This Class B digital apparatus complies with Canadian ICES‑003.
This device complies with Part 15 of the FCC Rules and with ISED’s licence- exempt RSSs.

Operation is subject to the following two conditions:

•  This device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation exposure statements
This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

• Bluetooth radio frequency band
• All channels supported from 2402 MHz to
• 2480 MHz with channel centers at every 1 MHz
• (2402 MHz, …, 2479 MHz, 2480 MHz) i.e. 79 channels.

Document No. 02992-99T02-5800 EN, FR-CAN Order/Item No. 105 383 06
Master Rev02, 07.2019
© 10.2021, WSAUD A/S. All rights reserved.
www.signia-hearing.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>