tc electronic Cairo Hifi Impulse IR Loader and Cabinet User Guide

: June 6, 2024
: tc electronic

Table of Contents

Controls
TC Electronic
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
IMPULSE IR LOADER

Visit musictribe.com to download the full manual
Please visit the product page on tcelectronic.com for FCC information

Controls

Level Knob – Adjusts the output level.
Navigation Buttons – Move forward and backward through the list of IRs. Press both buttons simultaneously to enter/exit global EQ.
Output
Footswitch – Press and hold to switch between A/B MODE and BYPASS MODE. A/B MODE: Press to toggle between IR A and IR B.BYPASS MODE: Press to bypass the IR loader.
USB – Connect to your computer for IR management and firmware updates.
Power – Connect a 9 V / >100 mA power supply.
Input

A/B MODE

Currently-selected IR
Total number of IRs loaded into IMPULSE
Name of current-selected IR file
The file location of the currently-selected IR
Input and output clipping indicators (visible in A/B and Bypass Mode)
Displays whether IR A or B is selected
EQ indicator is shown when EQ is active

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

TC Electronic

IMPULSE IR LOADER

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com

IMPULSE IR LOADER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC, and Directive 1907/2006/EC.
The full text of the EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark

UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom.