Shantou City Ourui Industrial 3700 2.4GHz 5-Channel RC High-Simulated Walking Rage Velociraptor Instruction Manual

City Ourui Industrial 3700 2.4GHz 5-Channel RC High-Simulated Walking Rage Velociraptor
Instruction Manual

Warning! Small parts are contained. Not suitable for children under 3 years old. Important information is contained in this package, please well keep it for future reference. The illustration on the package may be varied from the real object. Please be subject to the real object.

CAUTION : Please DO NOT discard this toy at will as it may severely affect the environment. Please dispose and recycle it properly.

WARNING!

• The transmitter can not be loaded with 2PCS of AA batteries that are more than 1.5V.
• Dinosaur lithium batteries require professionals to disassemble or replace.
• Non-chargeable batteries are NOT to be recharged.
• Batteries of different types are NOT to be mixed together. Old batteries are NOT to be mixed with the new ones.
• Only batteries of the same brand or batteries recommended can be used.
• Please load the batteries as per the coned ‘+/-‘polarity.
• The exhausted battery in the transmitter should be removed from the toy.
• Battery ends are not to be short-circuited.
• Chargeable batteries in the dinosaur can only be charged under the guardianship of the adult.

MAINTENANCE & REPAIR!

• If you don’t play this product for a long time, please remove the batteries.
• Please clean this product with a clean, soft cloth.
• Please do avoid exposing this toy To sunlight or heat.
• Please DO NOT soak this toy in the water as it will damage the toy parts. The operating temperature should be kept within 0-40 C.

The normal function of the product will be disturbed by strong magnetic objects. Please kindly refer to the reset setting in the instruction manual the problem can not be solved. please choose another place for playing.

TRANSMITTER

ON/OFF 1

• When it is “ON”: Individual Palpation
• When it is “OFF: long press

DEMO KEYP 2

Press the DEMO key,the Dinosaur will automatically demonstrate all kinds of walking actions, such as walking forward, backward, turning left turning right, tail flicking, swaying, etc. While sending out all kinds of sound effects.

Forward key3, Backward keys4
Turn-left key5, Turn-right key 6

• Press the FORWARD key for one time, and the dinosaur will walk forward.
• Press the BACKWARD key for one time, and the dinosaur will walk backward.
• Press the Turn-left key for one time, the dinosaur body will twist to the left.
• Press the Right-Turn key one time, the dinosaur body will twist to the right.
• Press both the FORWARD and Turn-left key at the same time, the Dinosaur will turn left.
• Press both the FORWARD and Turn-right key, the Dinosaur will turn right and walk forward.
• Press both the BACKWARD key and Turn-left key, the Dinosaur will turn left and walk backward.
• Press both the BACKWARD key and Turn-right key, the Dinosaur will turn right and walk backward.

INDICATOR LIGHTS

• When it fails to make decoding when switched on or can not receive the transmitting signal, the LED light will be flashing.
• When it is successfully finished decoding or can not connect successfully or not operating, the LED light will keep eternal bright “ON”.
• Move the Dinosaur or turn left/turn right, the LED light will be flashing.

OTHERS

• Power Saving Mode: If there is no operation for 20 minutes, the transmitter will automatically enter into the Mode of switch-off so as to reduce power consumption. When it is used again, you need to press the ON/ OFF key again to use it.

DINOSAUR BODY

0N/OFF 1

• Push the toggle switch to the side of ‘ON”to switch on the power.
• Push the toggle switch to the side of “OFF” to switch off the power.

DEMO KEY 2

• Press the DEMO key, and the dinosaur will automatically demonstrate the walking action, move forward and it will send out various sound effects with the mouth glowing at the same time.
• Keep pressing the DEMO key for 3 seconds, the dinosaur will be forced into Sleep Mode to reduce battery loss.
• When the dinosaur is dormant, just press the DEMO key to wake up the dinosaur. Restart the transmitter and you can start the game.

OTHERS

• Light & sound effect: It will send out three kinds of simulated cries at random when it walks forward or backward. It will send out a simulated footstep sound with the mouth glowing at the same time.
• Low power reminder: when the battery power of the dinosaur is insufficient, it will stop working for 3 seconds and then send out a reminding sound of its reminder that it needs to be recharged.
• Auto sleep: where there is no operation for 20 minutes, the dinosaur will automatically enter into sleep so as to reduce power consumption; turn off the power and turn it on again or press the DEMO key to restart.

DINOSAUR ICON

DINOSAUR CHARGING ICON

CHARGING PORT 3

• Plug USB charging wire Micro USB into the micro USB socket at the belly of the
• Plug the USB port into the USB port of the computer or other adapter (such as a mobile phone charger), the dinosaur will charge automatically (it takes about 2 hours to charge it When it is fully charged, it can be used for 2 hours).
• When charging, the red indicator light at the dinosaur’s belly will be ‘OW; when it is fully charged, the indicator light at the dinosaur’s belly will be “OFF”.
• When the battery is fully charged, it will stop charging automatically to protect the lithium battery.
• Remove the USB charging cable, restart it and you can play again.

CHARGING PRECAUTIONS!

• Please DO NOT place the charged battery in a place with high temperature or heat, such as an open fire or electric heating device, otherwise, it will be damaged or
• Please DO NOT strike the battery or strike the battery on the surface of a hard object.
• Please DO NOT decompose the battery.
• Please DO NOT soak the battery in the water. The battery should be stored in a dry place.
• Guardians should not leave when charging.

CAUTION!

• It should be assembled or loaded by the guardian when replacing the batteries in the transmitter.
• Only when you can make sure that you can avoid function failure can you replace the batteries.
• Please well, keep the instruction manual for future reference.
• Please strictly follow this instruction manual to use this product.
• Under the static environment, the product may fail, so the user should reset the
• It is recommended to use all new lithium batteries so as to make the best use of this product.

TECHNICAL SAFETY

• This product belongs to class C equipment in Article 1 (1) general micropower (short-range) radio equipment of Technical requirements for micropower (short-range) radio equipment. It is highly FORBIDDEN to use all kinds of radio stations within the radius of the runway (500m). During the period when the relevant national departments issue radio control orders, the transmitters of all the models shall be stopped according to the requirements.
• Intelligent One-key ON/OFF technology is applied on both the Dinosaur and If it is not operated for 20 minutes, it will switch off automatically so as to reduce the power consumption. Press the ON/OFF key to restart it.

Due to the influence of static electricity or other interference, the system can not be switched on or switched off in a few cases. At this time, the battery can be removed and reloaded and the system can be reset after power failure and then you can normally use it.

BATTERY LOADING IN THE TRANSMITTER

2PCS 1.5V AA batteries

1. Screw the screw cap to open the battery cover.
2. Load 2 PC 1.5V AA batteries inside the battery compartment as per the correct +/-” polarity.
3. Close the battery cover and Lock the screw caps.

POWER OF THE TRANSMITTER

Power type: DC = rated power: DC 3V 0.5W 2 PC 1.5V AA batteries are required.
Battery (Not included) operating frequency: 2.4GHz Operating temperature: 0 ° to 40 t

POWER OF THE DINOSAUR

Battery type: DC = rated power: DC 3/V 7W Battery: lxlithium battery
Capacity: 1200 mAh
Charging time: About 2 hours
Charging temperature: 0 ° to 40 t

CHARGING PORT OF THE DINOSAUR

Charging Port: Micro USB
Voltage of the charging port: DC 5V

USB CHARGING WIRE

Voltage:5V 0.5A Rated Power:s2.5W

GAME STARTING

1. Please fully charge the dinosaur first before loading the batteries into the transmitter.
2. Switch on the power of the dinosaur and then switch on the transmitter, the transmitter will automatically make decoding with the dinosaur and finish decoding.
3. Press the forward or backward key to move forward or backward.
4. Press both the FORWARD key and Turn-left key, the dinosaur will turn left and walk forward. Another functional key is the same as this.
5. Press the DEMO key, and the dinosaur will automatically demonstrate various walking movements, which is suitable for younger children to watch and play with without any remote control.

MORE DINOSAURS ARE PLAYED AT THE SAME TIME

1. First of all, please switch on the first dinosaur and then switch on the corresponding transmitter. Push the control lever or press any keys and the dinosaur will make decoding with the transmitter.
2. Then you can switch on the second dinosaur and then switch on the corresponding transmitter. Press any key and the Dinosaur will make decoding with the transmitter.
3. Follow the same operation to switch on the 3rdand 4th until the No. N Dinosaur till all the dinosaurs can finish decoding successfully and then you can control it independently one by one.

SOLUTION

•Insufficient power with the dinosaur or transmitter.
•The dinosaur or transmitter gets interfered and the system program has stopped running.| •Recharge the dinosaur or replace the batteries in the transmitter.
•Remove the batteries and reload the batteries to reset the system.
Losing control| •There is one R/C car with the same frequency playing near you. The dinosaur has been decoded by another transmitter.
•Exceeding the controlling scope.| •Move it to another place where there is no radio interference.
•Switch off the transmitter of the other same models and then restart.
The controlling action gets slow or intermittent.| •Interfered by high frequency or close to high voltage wires, transformers, or any buildings.
•Insufficient battery power in the transmitter.| •Avoid playing in such kind of environment or choose another place for playing.
•Replace the transmitter with a new battery.
•Please move the transmitter close to the dinosaur when playing.
Dinosaurs walk too slow or are unable to walk| •Battery is exhausted.
•The wheel but maybe clogged with hair, plush, or other dirt.
•Aging battery or bad motor.| •Recharge the battery.
•Carefully remove all kinds of stuff.
•After troubleshooting, if it still can not be recovered, please contact the sales agent for repair.

PARTS ICON

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more  of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>