ICOMTEC 702K-AS-HC Generator Control Panel User Manual

ICOMTEC 702K-AS-HC Generator Control Panel

Description

The DSE702 Generator Controller offers an excellent range of engine monitoring and protection features. The Generator Manual Start Control offers inputs to monitor low oil pressure, high engine  temperature and overspeed and the manual start version also has a user-defined auxiliary input. Auto  Start versions also include an input option for a start signal from a remote location.  When the Generator Manual Control detects any of the above faults it will light the warning LED on  the front panel.

Features

• Manual start and remote start versions.
• Remote start input (auto start version only)
• Engine monitoring and protection.
• LED indication
• Engine pre-heat
• Front panel mounting.

Specifications

DC Provide:

• CONTINUOUS VOLTAGE RATING
  8 V to 35 V continuous

• CRANKING DROPOUTS
  Able to survive 0 V for 50 mS, providing provide was at least 10 V before dropout and provide
  recovers to 5 V. This is achieved without the need for internal batteries.

Outputs of DSE702:

• START
  Solid state 1.2 A negative grounding terminal

• RUN
  Solid state 1.2 A negative grounding terminal

• PRE-HEAT
  Solid state 1.2 A negative grounding terminal

Generator:

• VOLTAGE RANGE
  15 V – 333 V AC (L-N)

• FREQUENCY RANGE
  3.5 Hz to 75 Hz

Dimensions:

• OVERALL
  72 mm x 72 mm x 38 mm
  2.8” x 2.8” x 1.5” Excludes key switch

• PANEL CUT-OUT
  68 mm x 68 mm 2.7” x 2.7”

• MAXIMUM PANEL THICKNESS
  8 mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>