Arzerlize FLD-036 LED Floor Lamp User Manual

Arzerlize FLD-036 LED Floor Lamp

Overview

LED floor lamp user manual

Thank you for your choice. Ple8811 rued the user manual carefully and keep n for further balance. Please follow the instructions step by step. Af!IJr Installation, this LED floor lamp can be controlled by a remote controller or touch button on the lamp.

Specification

Installation steps

step 1

step 2

step 3

step 4

step 5

Use tips

• The remote controllor requires two AAA batteries.
• Pairing is not required before using.

If the remote control fails to work, we suggest you to re-pair with the following methods:

1. Turn on the power switch;
2.  Unplug the power cord three times in a row and reconnect it, the floor lamp will flash quickly, and then you can Long press the 11 @) 11 button of the remote controller about 3 seconds within 1 mins until the lights flash quickly.

Remote Controller Instruction

Tips

1. If you want to cancel the pairing between the controller and the floor lamp. Please tum off-on-off-on-off-on the power for 3 limes.
2. There is a magnet on the back of the remote controller, which can be adsorbed on any iron metal surface such as floor lamp pole.

WARNING:

1. Cut off the power before installation.
2. Keep n away from flammable and flre source.
3. Replacing and clean to all electricity touched.
4. Lamp la operated In dimming circuit
5. Keep H away from water.
6. Assemble the lamp according to the instructions and do not rebuild.
7. Do not stare at the lamp for a long time.
8. Aaoamble, take apart or move the lamp gently.
9. Please do not cover anything on the lamp head and 81101d banding and bumping the lamp pole.
10. Keep It away from children.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>