littlelf Smart Home Camera User Guide

littlelf Smart Home Camera

Quick Start Guide of Littlelf Smart Home Camera

Thank you for choosing Littlelf Smart Home Camera. Please read the Quick Start Guide carefully before using and keep it in good conditions.

In The Box

Product Appearance

Product parameters

Product Instructions

APP Download and Installation

1. For Android devices, search in Google Play App store and download “Littlelf smart”; For iOS devices, download “Littlelf smart” in APP store.
   littlelf smart

2. Connect the mobile phone (IOS/Android) to a 2.4G WI-FI network, scan the “Littlelf smart” APP QR code below, download and install it according to the APP hints to complete the download.

Notes: To ensure that the full functionality of the “Littlelf smart” APP works properly, allow the “Littlelf smart” APP to gain access to your mobile devices.

Accounts Registration

Open the “Littlelf smart” APP, click “Agree ” of privacy policy and then register an account with a mailbox, after registering successfully, log in the Littlef smart APP.

Notes:

1. Please click “Agree” and “Service Agreement and Privacy Policy”;
2. If register with mailbox, please check the verfication code in spam mailbox if you didn’t receive.

Connecting Mode

Power the camera on and wait for the camera to start until the red light flashes (about 40-60 seconds) and then start the connection of Littlelf camera.

Notes:

1. The passwords do not support special characters such as @,#,%,&
2. Place the camera next to the router before configuring
3. QR Code Net-paring and Smart Configuration only support 2.4G wifi
   

QR Code Mode

Definition
Use camera to scan the QR code on the mobile phone which contains net-pairing info.
Steps
Click Net Paring Mode Choose QR Code Click next step Enter WiFi
Password (Password not support @,#,%,&) Continue Scan QR Code with the camera（Align the QR code with the lens of the camera about 15-20cm Click “Hear the beep” Waiting for finishing connection.

EZ Mode

Definition
After connecting the phone with 2.4g wifi, enter the name and the correct password of wifi to match the network
Steps
Click Net Paring Mode Choose EZ Mode Click next step Enter WiFi Password(Password not support @,#,%,&) Confirm Connecting Successful connection after you hear the sound.

Operation Guide

Interface Introduction
When accessing to the real-time video interface, you can zoom the video interface, switch to play sound, capture High-Definition (HD) pictures, view the real-time video with full screen, snapshot real-time pictures and launch an intercom, save pictures and record video to local album, select the HD mode of the camera.

Detection Alarm Messages

The shortcut to check detection alarm messages. Click All messages, there is a video viewing portal in each alarm message. If the cloud storage is purchased, it will jump to the event recording recorded by cloud storage; if the cloud storage is not purchased and there is a SD card recording, it will jump to the event recording recorded by the SD card; if there is neither a cloud storage recording nor a SD card recording, it will jump to real-time video.

FAQ&Feedback

You can search all the device related FAQs here, If all the above solutions can’t solve your problem, you also can submit the question by clicking the “Unresolved” to submit issues ,then you will get the answer in 24 hours.

Troubleshooting

APP can’t be registered successfully
1. Please tick the software service agreement and privacy policy.
2. Please check if the verification code is in the spam mail.
3. During installation, please allow the app to obtain your location and all permissions, the system will automatically arrange the best server.
4. If above solutions still can’t be eective, we recommend you to uninstall and install the app again, the current location and all permissions are allowed during the installation.

Unable to connect to the network A) Unable to connect to WiFi

1. Please enable the DHCP of the router.
2. Please make sure the camera is not in the blacklist in MAC settings of the router.
3. Turn o the 5GHz wifi in the router (Note: Please contact the router manufacturer if you can’t turn o the 5g wifi).
4. After connecting to the 2.4GHz wifi, please check your mobile phone if can access the Internet.
5. After the network is normal, reset the camera and reconnect.
   

Wifi password reason

1. Check the WiFi password connected of the camera is same as the WiFi password of the connected router.
2. Check if the entered WiFi password has space or special characters(@,#,%,&).

Disconnected 5G WIFI, unable to connect to wifi

1. Turn o the 5G network and keep the 2.4G network. Disconnect the router and then restart the camera.
2. WiFi name naming cannot have “5G” words.

The camera matches the wifi successfully, but can’t hear the voice of the camera

1. Reset the camera, then power o and reconnect the camera (Only reset can remove residual data ).
2. Put the phone as close as possible to the camera and router when it is connecting.
3. Please turn o the 5GHz wifi.

No pop-up message for motion detection alarm

1. Open permission settings in the phone settings to allow message push notification;
2. After some Android phones exits the background, it is not possible to receive the alarm push information.
3. Turn o motion detection in APP.
4. SMS and email reminders are not supported at this time.

Motion detection messages prompt frequently

1. If motion detection sensitivity is too high, light changes also can cause alarm.
2. Reduced sensitivity of alarms (recommended low level).

After inserting SD, it displays damaged

1. Before inserting the SD card, Disconnect the power. Connect the power to start after plugging in the card.
2. The SD card must be formatted before using，you can formatted it in the App conveniently.
3. We recommend purchasing an SD-card directly from the manufacturer.

Watch videos with the same camera on dicerent devices

1. The main account can share the video to other account without limit quantity, but the shared accounts only have the rights to watch, snapshot and record video.

The scenarios for the reset key

1. Reset wifi information.
2. Wifi exception before connecting to the camera.
3. wifi password error.
4. wifi drop.
5. replace new wifi.

What to do if there is no solution in Q &A

• You can log on to Littlelf website: www.littlelf.com, ask for help online.

Legal Declaration

All right reserved
The copyright of the instructions is owned by Shenzhen Skyline Security Co., ltd. Others are not allowed to plagiarize and embezzle.

Trademarks Statement
Littlelf trademark ownership is owned by Shenzhen Skyline Security Co., ltd. Other trademarks covered by this manual are owned by their respective owners.

Disclaimer
The products (including hardware, software, firmware, etc.) described in this manual (including its hardware, software, firmware, etc.) should be provided in accordance with the “status quo”. As for the possibility of defects, errors, or failures, Little does not provide any form of express or implied warranty, including but not limited to merchantability or the assurance that the person is applicable to a particular purpose.
if it involves Internet services when using the product described in this manual, you may be apected by the instability of various links, and may be caused by computer viruses, hacker attacks, system instability, and other incompatible factors that cause the software to fail to achieve the desired results, and may lead to you because of incorrect operation or other reasons. For personal information or data leakage or loss, you should strengthen your personal information and take all the relevant risks yourself.
When using this product, please strictly follow the applicable law. You agree that this product shall be used only for civil use and shall not be used to infringe upon the rights of third parties, to use in medical / safety devices or other applications which may cause life danger or injury to life, or weapons of mass destruction, chemical or biological weapons, nuclear explosions or any unsafe nuclear energy use or dangerous or humanitarian use. Any loss or liability arising from the above use will be at your own expense. If the above content conflicts with the applicable law, the law shall prevail.

After-Sales Service Support

If you encounter any problems in the process of using, you can get support in the following ways:

1. Visit the official website: www.littlelf.com, get online support.
2. Send your problems to Email: support@littlelf.com.
3. Call After-sales service hotline: 0086-755-28483693.

(Note: Due to time difference, the working time is GMT+8 and the hotline is available between 10:30 am—20:00pm on the working days).

Requirements for Power

Supply
This product is suitable for DC5V1A power adapter only. [Operating Requirement] Please transport, use and store cameras within the allowable humidity and temperature range. Please avoid rainwater and other liquids flowing into the camera to avoid damage to internal components. Do not use in strong lightning weather to avoid damage to internal components. Please pay attention to the maintenance and maintenance of the camera. If you need to clean it, please wipe it with a dustless cloth.

Warranty Card **

**

1. Please fill out the warranty card carefully and keep it in good condition.Please use this card to get the maintenance service.
2. The right to interpret and modify the contents in the warranty card shall be owned by the company.

References

• littlelf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>