BLOVEDREAM N40B Handheld Terminal User Guide

: September 14, 2024
: BLOVEDREAM

Table of Contents

N40B Handheld Terminal
Specifications:
Product Usage Instructions:
Opening the Device:
Optional Functions:

N40B Handheld Terminal

“`html

Specifications:

Front Camera: Optional
Scan Key
Return Key
Up Key
Delete Key
F1, F3 Function Keys
Flashlamp
Camera
Battery Compartment
Earpiece
Indicator Light
Light-sensitive Scan Key
Homepage Taskview
Down Key
Enter Key
F2, F4 Function Keys
Power Button
NFC Card Reading Area: Optional

Product Usage Instructions:

Opening the Device:

To open the strap buckle, hold it and gently push it
downwards.
Open the Battery Cover:
Flip the battery compartment switch to the right.
Push the battery compartment cover in the direction of the
arrow to open it.
Remove the battery from the compartment after opening the
cover.

Note: Remove the yellow insulation sticker from the battery
before turning on the device.

Charging Instructions:

To charge the device, use the provided USB cable and plug it
into the Type-C connector.
You can also use a cradle for charging (sold separately).

Note: Charge the device when battery power is less than 20%
to prevent over-consumption. If over-consumed, charge for 20-30
minutes to return to normal charging status.

Optional Functions:

Scan: If equipped, open the scanner app and
press the scan button to scan barcodes.
NFC: If equipped, open the NFC app and read
cards in the NFC reading area. Ensure your PDA has NFC
functionality before use.
OTA (Update Online): Support OTA updates by
entering Settings – About phone – System update to check and update
firmware.

FAQ:

FCC Statement: For FCC compliance information
and statement, please refer to the official documentation provided
with the product.

“`

Frontcamera(optional)
Scankey
returnkey Upkey
Deletekey F1 F3
Scankey
Flashlamp Camera Scankey
Batterycompartment

earpiece Indicatorlight
Light-sensitive
Scankey
homepage Taskview
Downkey enter F2 F4
Powerbutton
Scanwindow
NFCcardreadingarea(optional)
Scankey

10

AccordingtothedirectionindicatedbythearrowinFigure1,holdthe strapbuckleandgentlypushitdowntoopenthebuckle.
11

OPENTHEBATTERYCOVER
1.Flipthebatterycompartmentswitchtotheright.
2.Thenpushthebatterycompartmentcoveroutinthedirectionofthe arrow
3.Thenopenthebatterycompartmentcovertoremovethebattery
Pleasepeelofftheyellowinsulationstickerpastedonthepositive andnegativeofbatterybeforeturningonthedevice
12

TF SIM2 SIM1
(Note:ThedeviceonlysupportsNANOSIMcard)
13

EQUIPMENTCHARGING
DEVICECHARGING: 1.UsetheUSBcablethatcomeswiththedeviceandplugitintothe Type- Cconnectortocharge. 2.Usecradletocharge.(Cradleshouldbepurchasedseparatey)

BaseCharging

Type-CInterface

Topreventthebatteryfrombeingover-consumed,pleasecharge thedevicewhenthebatterypowerislessthan20%.Ifthebattery hasbeeninaover- comsumptionstatus,pleasechargethedevice for20-30minutes.Thenitwilldisplayanormalchargingstatus.
14

SCAN(OPTIONAL)
IfyourPDAisequippedwiththefunctionofSCAN,Plsoperateitas below: 1.PlsopentheAPPofSCANNER.(AsPic1) 2.IntheinterfaceofSCAN,pressscanbuttontoscanthebarcode.
(AsPic1)
Settings

(AsPic2)

Clearthe contents

(AsPic3)

15

NFC(OPTIONAL)
IfyourPDAisequippedwiththefunctionofNFC,Plsoperateitas below: 1.PlsopentheAPPofNFC.(AsPic1) 2.IntheinterfaceofNFC,plsreadthecardinNFCreadingarea.
(Warmtips:NFCisoptionalfunction,beforeusethisfunction,you shouldmakesureyourPDAwithNFCfunction)
16

OTA(UPDATEONLINE)
OUR PDA SUPPORT OTA (UPDATE ONLINE) FUNCTION, YOU CAN UPDATE THE LATEST FIRMWARE BY OTA, OPERATE IT AS BELOW: 1.Plsenterinto”Settings”–Aboutphone. 2.Press”Systemupdate”andenterintotheupdatingfirmwareinterface. 3.Press”Updatechecking”toupdatetheOS.
(AsPic1)
17

FAQ:
1.Howtorestorefactorysettings? Select”Setting””System””Resetoption””Factorydatereset” 2.WhycannotopenthePDA? (1)Ifthenewdevicedoesnotturnon,pleasemakesurethestickeron batteryhasbeenremoved. (2)Pressthepowerbuttonfor4suntilthedevicescreenstartstodisplay andthenreleasethepowerbutton. (3)Plscheckifthebatteryhaspower,putthebatteryintoPDAand chargeit,ifthescreenshowschargingicon,chargethePDAforsome timeandrestartit. 3.PDAcannotconnecttothePC? IfyouconnectthePDAwithyourPC,nopromptmessages,plschange anothercabletotest,ifnotwork,plschangeanotherpc. 4.Whenusingscanner ,thereisnodatabutscan-lighton,Why? (1)Gotoscansetting,andcheck”keyboardoutput”. (2)Ifchecked,thenplsresetthescandemofortwice,andoperate “OFF”–“ON”. 5.Thedevicecannotscanthecode. (1)Checkifeachscanbuttoncanbeusednormally. (2)Checkifthescanenginesupportsthebarcode. (3)Checkifthescanninglensandbarcodeisclearandunobstructed. (4)Checkthescansettingandreset. 6.Thedevicecannotcharge. (1)Checkifthedeviceadapterandchargingportaregood. (2)Ifthedevicehasn’tbeenusedforalongtime,pleasekeepitcharged for30minutes.Thencheckwhetherthedevicelightsonornot. (3)Replacethebatteryofthedevicethatcanbeturnedonnormally, checktheproblemonbatteryordevice. 7.Howtousethebatterycorrectly? ThebatteryisLi-ionbattery,Ifnopower,plsimmediatelychargerit, Don’tkeepthebatterywithfullpowerornopowerforlongtime,The bestwayistokeep50%powerofthebatterytostoreit.Andifyoudon’t usethePDAforlongtime,plspulloutthebatteryfromPDAandstoreit.
18

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm full interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) information: This Device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 10mm separationdistance between the user’s body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessoriesthat do not satisfy these requirements may not comply with FCC RF exposure requirements, andshould be avoided.