Wightman 140 Potenza Universal Remote Control User Guide

Table of Contents

Setting Up Wightman TV Remote to Control Set-Top Box

Press the STB button once. The STB button should light up.
For Entone Kamai or Amino Amulet 6 Set-Top Boxes, press and hold SETUP and the number 7 until the STB button blinks twice.
For Amino 140 or 540 Set-Top Boxes, press and hold SETUP andthe number 1 until the STB button blinks twice.
To test the remote with the Set-Top Box, press the guide and channel change buttons.
For more information, tune in to Wightman channel 991.

Setting Up Wightman TV Remote to Control TV

Press the TV button once; it will blink once. Then press and hold until the TV button blinks twice.
Press 9 9 1.
Press and release the CH+ button once every second until the TV turns off.
If the TV turns off, press SETUP once to lock in the code. The TV button will blink twice to indicate the code saved. If not, restart steps 1-4.
Press POWER to turn your TV back on.

Setting Up Polaris Big Button Remote

Power on your TV through the TV itself or with the remote control that comes with your TV.
Ensure that your Wightman TV remote control has new batteries installed.
Note: Wightman TV remotes use two AA batteries.

SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR

SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR

Press the STB button once. Note: The STB button should light up.
To set up the Entone Kamai or Amino Amulet 6 Set-Top Boxes, press and hold SETUP and the number 7 until the STB button blinks twice.
To set up the Amino 140 or 540 Set-Top Boxes, press and hold SETUP and the number 1 until the STB button blinks twice.
To test the Wightman remote with the Set-Top Box, press guide and channel change.
To learn more about your remote, tune in to Wightman channel 991.
On your Wightman TV remote control, press the TV once; the TV button will blink once. Then press and hold SETUP until the TV button blinks twice.
Press the numbers 9 9 1.
The TV button will blink twice.
Press and release the CH+ button once every second until the TV turns off. NOTE: In this search mode, the remote control will send codes from its library to the selected device, starting with the most popular code first.
If your TV is turned off, press SETUP once to lock in the code. The TV button will blink twice to indicate that the code is saved. If your TV did not turn off, please restart steps 1-4.
Press POWER to turn your TV back on.

Amino 140 / Amino 540

OR

Kamai 5, Kamai 7x, Amulet 6, and Amulet 7

Press Cable button.
Press and Hold the Setup button until the Cable button blinks twice.
Put in the code 4437 then press the Setup button to lock in the code.
Test Guide, Menu and Changing channels.
OR
Press CBL.
Press and hold the Setup + Blue D button.
The CBL button flashes twice when programmed.
Press the TV Power button.
On your Wightman TV remote control, press and hold the SETUP button until the TV Power key blinks twice.
Type 9 9 1.
Press CH+ repeatedly until the TV turns ON and OFF.
Press the SETUP button to save the working code.

For support and full remote control manufacturer’s guides, visit wightman.ca/support/tv
Technical Support | Available 24/7/365 | 1-877-327-4440 |
[email protected]