Wireless Earbud, Bluetooth 5.3 Earbud Stereo Bass, Bluetooth Headphones-Complete Features/Instruction Guide
- June 5, 2024
- Jxrev
Table of Contents
Wireless Earbud, Bluetooth 5.3 Earbud Stereo Bass, Bluetooth Headphones
Specifications
- SPECIAL FEATURE : Android Phone Control, IOS Phone Control, Lightweight, Noise Cancellation, Noise Isolation, Microphone Feature, Sports & Exercise, Water Resistant, Android Phone Control, IOS Phone Control, Lightweight, Noise Cancellation, Noise Isolation, Microphone Feature, Sports & Exercise, Water Resistant
- COMPATIBLE DEVICES : Smartphones of Android or iOS, tablets, laptop, computers, TV with Bluetooth
- BRAND : Jxrev
- STYLE : Over-Ear
- PRODUCT DIMENSIONS: 1.18 x 1.1 x 0.39 inches
- ITEM WEIGHT: 3.53 ounces
- BATTERIES: Lithium Polymer batteries
Introduction
Bluetooth 5.3 technology provides a robust, low-latency wireless connection for high-quality sound (music or call). When you open the charging box, the Bluetooth earbuds will instantly connect to your phone’s Bluetooth, saving you time and avoiding difficult operations. The wireless headphones have 13mm drivers that improve quality sound with deep bass and mids at optimal levels that are appealing to the ears, as well as a clear call. You’ll feel as if you’re in the middle of a concert. Call noise cancellation is used by the built-in mic in each Bluetooth earpiece to deliver clean and lifelike sound. It will allow you to have high-quality discussions whenever and wherever you want. When you use iOS or Android smartphones, computers, tablets, laptops, TVs, etc., you get a full wireless experience. Also, nothing is more crucial than working out with music at all times.
It has 32 hours of continuous playing, 6-8 hours of single playtime, USB-C rapid charging, and IP7 water resistance: A single charge provides approximately 6-8 hours of activity, and a charging case provides a total of 32 hours of entertainment. A fast-charging USB-C cable can fully charge the rechargeable case in about 1.0 hour. Sweat- and weather-resistant earbuds with microphone are built with a precision-designed case to protect splashproof when you’re at the gym or running outside, so they must be a terrific sports companion.
What’s in the box
- 2* True wireless earbuds (Left and Right)
- 1* USB-C Charging Cable (30cm)
- 1* USB-C Charging Case
- 1* User Manual (English, Spanish)
HOW TO SET UP
- Delete the Bluetooth connection on your phone’s setting page
- Put the earbuds into the charging case
- Close the lid to charge the earbuds
- Take out the earbuds and wait for 20 seconds
HOW TO WEAR
Put the earbuds in your ear canal and rotate to lock, so you can feel comfortable wearing it
HOW TO CONTROL
Frequently Asked Questions
-
When my wireless earphones are fully charged, how do I know?
When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged. -
What’s the best way to make my wireless earbuds operate together?
Reset your earbuds (red lights blinking), then place them back in the case and wait about a minute before pulling the right one out first and allowing it to fully turn on, then pulling the left one out and allowing it to do the same. -
Is it possible to use the earbuds separately or do they have to be used together?
Yes, you are allowed to utilize one at a time. I’ll leave one in the case and use the other on occasion. Yes, removing one will halt your music/video, however, double-tapping the earpiece in your ear will continue it. -
How long does it take to charge genuine wireless earbuds?
The earphones take around 2 hours to fully charge. If the battery is low, charging it in the charging case for 10 to 20 minutes can give you an extra hour of use. Connect the charging case to a USB power source or an approved wall charger. -
When not in use, can I store wireless earbuds in a charging case?
Do not leave your earbuds or charging case plugged in for an extended period of time. Unplug the cable once they’re fully charged. Also, if you’re planning to put your headphones away for a week or longer, consult the manual for any specific storage instructions. -
Is it possible to charge my earbuds while the case is charging?
Close the lid on the charging case and place the earbuds inside. The battery LED within the charging case glows red, yellow, or green when you open the lid, indicating the current battery status of the earphones. The earphones take around 2 hours to fully charge. -
Why is it that just one of my earbuds is functioning?
Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal. -
How do I get both of my earbuds to function simultaneously?
To sync your earbuds, press the soft-touch panel on each one at the same time, then switch on your device’s Bluetooth and select connect (ignoring the mono option) and presto, stereo music! There was an issue, so please accept my apologies. Please come back later and try again. -
Why aren’t my wireless earbuds communicating with one another?
Step 1: To reset the headphones, double-press the power keys on both sides while the headphones are charging (the white LED indication on the earphones is on). Remove both headphones from the charging case, and they will automatically turn on and connect within 60 seconds. -
Is it required to wear both earbuds at the same time?
You can utilize them on their own; the case is the key. When you remove them both from the case, they both turn on and connect to each other, after which they search for a device. If you merely remove one earphone from the case, it checks for the other one before looking for a device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>