MOULTRIE MFA-15074 Universal Bluetooth Timer User Guide
- June 9, 2024
- MOULTRIE
Table of Contents
MOULTRIE MFA-15074 Universal Bluetooth Timer
DOWNLOAD MOULTRIE BLUETOOTH® TIMER APP
STEP 1: Open the camera on your device, as if taking a photo
STEP 2: Hold your device so that the QR code appears in the viewfinder
and you see a notification with a link
STEP 3: Click on the notification to open the link to download the app
After removing the old timer, install the Universal Bluetooth” Timer into your Moultrie feeder kit using the pre-installed Phillips head screws.
If applicable, reuse existing Phillips head screws to secure external power connector to the feeder kit; screws not included. (Secure the external power connector out of the way if unused.)
Connect the motor to the Universal Bluetooth Timer as seen below.
Connect the 6V SAh or 12V7Ah DC battery with the red timer wire to the
positive battery terminal and the black timer wire to the negative battery
terminal.
CAUTION : DO NOT REVERSE POLARITY OF THE BATTERY LEADS.
Do not let the battery leads come in contact with one another while connected to a battery. This can cause personal injury or property damage. In no event shall PRADCO be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of this product. Your use of this product Is at your own risk.
FCC COMPLIANCE
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions;{1) This device may cause harmful interference,
and (2) this device must accept any interference received, including
interference that may user undesired operation.
Changes or modifications not explicitly approved by Moultrief-feeders could
void the user’s authority to operate this device.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC COMPLIANCE
This device contains licence-exempt transmitters)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Moultrie Feeders is under
license. Other trademarks and trade names are those of their respective
owners.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. FC and other countries and regions.
Select your newly added timer from the list on the ‘My Feeders· Screen.
TIPS & TRICKS
- To remove a paired timer, swipe left on the timer you wish to delete in the ‘My Feeders” list and press the red button to remove.
- Random Mode will generate one random feed time before 12PM and one random feed time after 12 PM, with a minimum of 3 hours in between feed times.
- Press the enable/disable toggle to turn off scheduled feed times without deleting them.
- Hold the test button located on the front of the timer for 3 seconds to start a 5 second test spin. Press button quickly to display battery status on LED.
For full instruction manual, go to www.moultriefeeders.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>