Keebly D1000 Wireless Charging Lamp Digital Alarm Clock User Manual

Wireless Charging Lamp Digital Alarm Clock

User Manual

Bluetooth Name: D1000

The Way to Use the Wireless Charger Correctly

(1) Only support the original charger and cable. If the user needs to use others, only support larger than 18W power of quick charger and quick charging cable.

(2) During the wireless charging, the mobile phone may be burning hot, which is a normal phenomenon, and it can still be charged. When the temperature of iPhone is too high during charging, the iPhone will automatically stop charging to protect itself, which is a law of the industry of wireless charging.

(3) Only support the mobile phone with the wireless charging function.

(4) Remove the protective shell of phone before wireless charging if the shell is too thick.

(5) The center part on the back side of the mobile phone shall be placed in the center of the inductive area of the wireless charger. If the center part on the back side of the mobile phone deviates from the center of the inductive area, the wireless charger may not operate, or the charging efficiency may be low, or the mobile phone may overheat.

(6) During the process of using the wireless charger, the luminance of the ambient light shall be turned down as much as possible, or be directly turned off, and the volume of the Bluetooth audio shall be turned down to avoid overheat.

(7) Inductive area of the wireless charger.

(8) Turn the button for 180° and adjust the width of the desktop.

1. Day
2. Alarm Clock (1)
3. Alarm Clock (2)
4. Natural Sound
5. Bluetooth
6. Snooze
7. Light
8. Fall-asleep

Button Function (Left to Right)

1

| | Time Setting
---|---|---
2| |

Alarm Setting

3

| | Alarm Setting
4| |

Decrease / Previous

5

| | Increase / Next
6| |

Snooze Button and Play/Pause

7

| | Bluetooth Mode
8| |

Natural Sound Mode

9

| | Fall-asleep Mode
10| |

Light Mode

11

| |

Light Brightness

1.                            First Use – Time Setting

(1) Press to set the brightness level of the time display. (4 brightness levels, from no brightness to max brightness)

(2) Hold for 2 seconds to enter the time setting mode, press / to adjust the Time Format.

(3) Press to set the Hour , press / to adjust the Hour.

(4) Press to set the Minute , press / to adjust the Minute.

(5) Press to set the Day , press / to adjust the Day.

(6) Press to finish the time setting.

2.                              Alarm Setting

(1) Hold for 2 seconds to enter the alarm setting mode, press / to adjust the Hour.

(2) Press to set the Minute , press / to adjust the Minute.

(3) Press to set light color, press / to adjust the light color.(C-1,2,„12)

(4) Press to set light brightness , press / to adjust the light brightness.(L-0,1„,20)

(5) Press to set the Sound of Alarm , press / to adjust the Sound of Alarm.(5-1,2,,,,13)

(6) Press to set the Volume of Alarm , press / to adjust the Volume of Alarm.( U-1,2,,,16, 0 means silent)

(6) Press to set the Repeat of Alarm , press / to adjust the Repeat of Alarm.(Different icons mean: 1:7=Week Repeat/ 1:5=Workday Repeat / 6:7=Weekend Repeat )

(7) Press to finish the alarm setting.

(8) Press to turn on/off the alarm.

Notes:

(1) When the alarm is on, the screen will display the icon and the alarm time you have set.

(2) and are two separate alarms, which need to be set separately in the same way.

(3) The order of the alarm options: **Hour > Minute > Color > Light brightness

Alarm sound > Alarm volume > Alarm repeat**.

(4) When setting, if no manipulation is done for more than 10 seconds, Sunrise Alarm Clock will automatically save the current setting

3.                        Decrease / Previous

In Bluetooth mode or Natural Sound mode:

Press to switch to the previous song.

Hold to decrease the volume.

4.                              Increase / Next

In Bluetooth mode or Natural Sound mode:

Press to switch to the next song.

Hold to increase the volume.

5.                Snooze button and Play/Pause

(1) In Bluetooth mode or Natural Sound mode press to play/pause.

(2) When the alarm rings, press the snooze button, the alarm will ring again after 9 minutes, a total of 5 times snooze, each snooze lasts 9 minutes.

(3) When the alarm rings, if no button is pressed, the alarm will automatically go into snooze mode after a duration of 15 minutes. (Automatically turning off the alarm after ringing twice.)

Notes:

(1) when the alarm rings, press other buttons will turn off the alarm.

(2) When the snooze button is pressed, the light and alarm will be turned off. After 9 minutes, the light and alarm will return to the set state within 2 and 15 seconds, respectively.

(3) When the alarm rings, press the snooze button and the snooze icon will be displayed on the screen.

6.                          Power & Bluetooth Mode

(1) Press to turn on/off the Bluetooth.

(2) Use your phone to search for the device ( named D1000 ) to connect.

(3) In Bluetooth mode, press / to switch music, press to play/pause music, hold / to adjust the volume level.

Notes:

(1) If you don’t make a Bluetooth connection within 5 minutes, Bluetooth will automatically turn off.

(2) When the Bluetooth mode is on, the Bluetooth icon will be displayed on the screen.

7.                        Natural Sound Mode

(1) Press to turn on/off the Natural Sound mode.

(2) Press / to switch Natural Sound.(12 kinds of sound)

(3) Hold / to adjust the volume level.

(4) Press to play/pause Natural Sound.

Notes:

(1) The screen will display icon in Natural Sound mode.

(2) The selected Natural Sound will single cycle.

8.                            Fall-asleep Mode

(1) This function is to stop playing music and turn off the night light at a fixed time, but does not affect the time display function.

(2) Short press button in sequence to choose the time you want to stop the music and night light. Make your choice and wait for 2~3 seconds, then the setting is complete.

Four Options:

(1) after 10 minutes;

(2) after 30 minutes;

(3) after 60 minutes;

(4) after 90 minutes;

(5) after 120 minutes;

(6) to turn off the “sleep timer” function

9.                              Light Mode

(1) Press to turn on or select light.(12 kinds of light color)

(2) Hold to turn off the light.

Note: When the light is on, the screen will display the icon.

10.                              Light Brightness

In light mode, press to set the brightness level of the light. (20 levels of brightness, 0 means no brightness)

11.                      About the Memory Function

The memory function will remember the alarm and Fall-asleep settings.

12.                              Special Attentions

(1) This product can keep the lights and turn off the sound. You can also turn off the lights and keep the sound.

(2) The light of this product can be adjusted or turned off.

(3) The volume of this product can be adjusted or turned off.

(4) This product is not waterproof

13.                              Product Parameter

Product Name

| Wireless Charging Lamp
---|---
Product Model/ Bluetooth Name|

D1000

Size

| 17877120mm
Input Voltage|

12v/9v/5v

Input Current

| 1.5A-3A
Power|

18w

Charger

|

12V1.5A/9V2A/5V3A

14.                                     Package List

Wireless Charging Lamp x 1
USB cable x 1
User Manual x 1
Charger x 1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>