onebillion onetab Tablet User Manual
- June 5, 2024
- onebillion
Table of Contents
onetab
User Guide
onetab@onebillion.org
About the device
Specifications
CPU | Unisoc SC9832E |
---|---|
RAM | 2GB |
ROM | 16GB |
FM | Yes |
BT | 4.0 |
GPS | Yes |
WiFi | 802.11 b/g/n 2.4GHz |
TF-card | Up to 256GB microSD |
Display | 6.98″ 720*1280 IPS |
Touch | 5-point capacitive touch screen |
Battery | 3.8V/2800mAh |
MIC | Yes |
Speaker | Yes |
G-sensor | Yes |
OTG | Yes |
OS | Android™ 9 |
Camera | Front 0.3MP+Rear 2MP |
SIM-card | Dual-SIM Dual Standby, Micro-SIM (3FF) |
Network | GSM+LTE |
Battery life | Standby: up to 20 days Audio Playback·8 hours continuous, Wi-Fi |
off, screen off, maximum volume Video Playback: 4.5 hours continuous All lab test data, and real-world usage might differ due to environmental variables
Notice: All the pictures in this manual are for reference only. Specifications and design can change without t notice Part of the stated storage is used by the system, so USA ble storage is smaller Android is a trademark of Google LLC
Environmental protection claims
HazardousSubstancesTable
Part Name| board| Display| Plastic| Metal|
Battery| Accessory
---|---|---|---|---|---|---
Plumbum (Pb)| | 0| 0| 0| | ***
Mercury (Hg)| o| o| o| o| o| o
Cadmium (Cd)| 0| 0| 0| 0| 0| 0
Hexavalent chromium (Cr6 4- )| 0| 0| 0|
0| 0| 0
Polybrominated biphenyls (PBB)| 0| 0| 0| 0|
0| 0
Polybrominated biphenyls(PBDE)| 0| 0| 0| 0|
0| 0
Environment-Friendly Use Period(EFUP)| 10| 10| 10|
10| 5| 5**
o: Indicates that this hazardous substance contained in all homogenous
materials of this part is below the limit requirements GB/T 26572-2011
*: Indicates that this hazardous substance contained in at least one of the homogenous materials of this part is above the limit requirement in GB/T 26572-2011
Remarks·The reason for indicating” ***** ” is none of the substitute
technology or parts. The use period is valid only when the product is operated
under the condition defined in the product manual
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. This Product meets the government’s requirements for
exposure to radio waves. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and
thorough evaluations of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6
W/kg averaged over one gram of this Device one tab T701 (FCC ID: 2AWNW-
ONETABT701) has been tested against this SAR limit. SAR information on this
can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the
device FCC ID number for the search. This device was tested for typical
operations 0mm from the body. To maintain compliance with FCC RF exposure
requirements, 0mm separation distance should. maintained to the user’s bodies
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>