CHAMPION CHSJ510 Slow Juicer User Manual
- June 6, 2024
- Champion
Table of Contents
CHAMPION CHSJ510 Slow Juicer User Manual
Safety Precautions
Pay attention to the following while use this appliance:
- Carefully read the instruction before use, keep for future reference.
- Before use, ensure the power voltage is consistent with the rated voltage indicated on the pro duct.
- Before dismantling, disconnect power supply.
- Before use, check power line, socket, strainer component and rotor for damage. If any damage or deformation, stop using the product, and contact with customer service department. To prevent dangerous condition, never dismantle it without permission.
- To prevent dangerous condition, do not connect the product with an external timer.
- To prevent accident, do not immerse the machine into water.
- Keep fingers and other objects out of feed inlet during operation. Contact with the screw rod can cause injury or product damage.
- Use the original accessories provided by manufacturer. Only use intended material pushing rod to push food.
- After juicing, turn switch to “STOP” and do not dismantle product accessory until the motor is completely stopped.
- Store the product in a place away from children. Prevent children from playing with the product.
- The product is not applicable for the person with disability, or sense, vision, or mental disorder or those without relevant experience and knowledge (including the child).
- The product is applicable for household and not for commercial purpose.
- Do not let the product run without supervision.
- To prevent product damage during use, do not add hard object (such as nuts), fiber-rich foods (such as sugar cane), less-juice foods (such as banana) and non-food object to feed inlet.
- To prevent injury and damage, use push rod instead of hand if foods are stuck at the feed inlet.
- Store the product in a cool and dry place.
Product features
- Applicable for juicing vegetables and fruits, such as apple, carrot, cucumber, celery, orange, etc.
- To squeeze out juice of fruits and vegetables and separate pulp from juice.
- Transparent juicing accessory, large-capacity juice, and pulp receptor.
- Removable juicing accessory, easy for cleaning.
- DC motor drive, low output rotation speed.
- Adjustable juicing operation (forward and reverse).
- High juicing efficiency, juice would not be oxidized and maintains tasty.
- Rated voltage: 220-240V~ Frequency: 50Hz Rated power: 200W.
- Mechanical control method: Forward, reversal and stop.
- Optional juice-extracting mouth.
Parts
- Food pusher
- Lid and feeding tube
- Rotor
- Screening cylinder
- Feeding cylinder
- Juice-extracting mouth
- Juice/Pulp Cup
- Base
First use
-
Dismantle package.
-
Immerse all removable parts and accessories in warm water and dry them. To prevent electric shock and machine damage, do not immerse the main machine in water.
-
Before assembly, be sure no power lines are inserted and the switch is at “STOP” position.
-
Use only the accessory recommended by the manufacturer.
-
After each use, turn off switch and before dismantling parts, be sure the motor has stopped rotation, pull out power lines.
Remark: Before use, assemble all parts as per drawing, otherwise the normal operation will be affected. See the following for the detailed operation procedures. -
Take out feed cylinder and align it with the positioning direction of machine (Figure 1).
-
Take out the screen cylinder (Figure 2).
-
Align screen cylinder with the feed cylinder (Figure 3).
-
Take out rotor to align it with motor shaft (Figure 4).
-
Take out food pusher and insert it into surface cover (Figure 5).
-
Keep the unlocking mark on surface cover in alignment with the triangle mark on the feed cylin der (Figure 6).
-
Rotate clockwise for tightening and anticlockwise for loosening (Figure 7).
-
Optional juice-extracting mouth assembly (Figure 8).
Operation
- Ensure accessories are correctly installed, juice receptor is below the juice outlet and the pulp cup is in place.
- After insert power lines, main machine would provide prompt tone and enter standby state.
- In order to insert fruits in the feed inlet easily, cut fruits into pieces.
Note:
- Fruits with less juice are not recommended, such as banana, apricot, etc.
- Nuts that would damage motor and juicing screen such as cocoa should not be used.
- Unpeeled fruits such as lemon and grapes should not be juiced before peeling. The core of pine apple should be removed.
- The product is not applicable for fiber-rich fruit or vegetable, such as sugar cane.
4. Put fruit into feed inlet, push the rod and squeeze fruit with even force.
5. Empty the cup when it is filled with juice before next operation.
6. It is recommended to close juice extracting mouth while juicing mixed
fruit, to fully mix fruit juice.
7. Juice in the transparent cylinder should not exceed the maximum capacity
value, slowly turn on juice extracting mouth to prevent juice from flying and
spraying.
Note: Keep finger or other object away from the fruit channel in juice
machine. If the channel is
stuck, push and clear the channel with push rod or other fruit slice and, if
failed, disconnect power
supply, remove fruit slices.
Note: Keep finger or other object away from the fruit channel in juice machine. If the channel is stuck, push and clear the channel with push rod or other fruit slice and, if failed, disconnect power supply, remove fruit slices.
8. If juice cup is filled or juicing is finished, press STOP and when spiral
feeding rod stops rotation, empty juice cup, clean feed cylinder and screener.
Juicing period should not exceed 20 minutes, and, after 2-3 cycles, the
product should be cooled down before next cycle.
9. If too much food is found in the product, press down REVERSAL, rotor would
operate spirally
10. After use, press down STOP, unplug wires, clean each part (with exception
for the main machine), dry it and assemble them, store in a safe place.
Cleaning and maintenance
- After use, clean each part (with exception for the main machine).
- Before cleaning, unplug wires and fully cool off main machine.
- After juicing, remove all parts as per the reverse procedure.
- After cleaning, dry the product with cloth, install and store it in a dry and safe place.
- Before flushing the outlet of feed cylinder, pull out the bottom silicon sheet and, after cleaning, install silicon sheet correctly.
Warning: To prevent scratch, take care of and pay attention to the mesh of strainer.
Storage
- The product should be kept away from children.
- Store the product in a safe place.
- Keep the product in a dry place away from direct irradiation of ultraviolet light.
Trouble shooting
Customer information on the REACH Regulation and the Candidate List. Of the substances included in the Candidate List, the following appear in this article: Product contact contains lead exceeding 0.01% Kind regards, Champion
Warranty
Champion Nordic guarantees that this product is free from manufacturing defects in terms of materials and workmanship during a period of 2 years in Sweden, Norway, Denmark and Finland. This warranty period begins on the day the product is purchased or delivered. Champion Nordic has no obligation to repair or replace products that are not accompanied by a valid proof of purchase. This warranty applies only to products purchased and used for home use and does not cover damage resulting from abuse, failure to comply with the instructions from Champion Nordic, cases in which the product has been modified or subjected to unauthorized repair, improper packaging on the part of the owner, normal wear and tear, or improper handling on the part of a transport company.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>