BISSELL 2806 Series Turboclean Powerbrush Pet User Guide

: June 6, 2024
: Bissell

BISSELL 2806 Series Turboclean Powerbrush Pet

Product Overview

BISSELL-2806-Series-Turboclean-Powerbrush-Pet-1

Upper Handle
Spray Trigger
Middle Handle
Clean Water Tank
Dirty Water Tank Handle
Dirty Water Tank
Lower Body
Nozzle

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Connect to a properly grounded outlet only. See grounding instructions. Do not modify the three-prong grounded plug.
Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
Use indoors only.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not use for any purpose other than described in this user guide. Use only manufacturer’s recommended attachments.
Do not use with damaged cord or plug. If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not carry the appliance while in use.
Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Turn OFF all controls before plugging or unplugging appliance.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
Use only BISSELL® cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formulas section of this guide.
Do not immerse. Use only on surfaces moistened by the cleaning process.
Keep appliance on a level surface
Always install float before any wet pick-up operation.

SAVE THESE INSTRUCTIONS

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

What’s in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

BISSELL-2806-Series-Turboclean-Powerbrush-Pet-3

Assembly

Go to support.BISSELL.com for assembly videos.

Slide middle handle onto lower body until it “clicks” into place
Slide upper handle into middle handle until it “clicks” into place.
Place clean water tank on handle and push down until it “clicks” into place
Wrap up power cord.

Cleaning Formulas

View our family of carpet cleaning formulas for your family of mess makers atBISSELL.com.

Keep plenty of BISSELL® formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty.

BISSELL-2806-Series-Turboclean-Powerbrush-Pet-8

Filling the Clean Water Tank

For additional tips and tricks on filling your clean water tank visit support.BISSELL.com.

Remove the clean water tank by lifting straight up and away from the machine.
Unscrew the cap at the bottom of the tank.
Fill with hot (140°F/60°C MAX) tap water to the WATER line. Do not use boiling water. Do not heat water in the microwave.
Add cleaning formula or ANTIBACTERIAL Formula with EasyFill System.
Replace and tighten the cap.
Replace the tank on the machine until it “clicks” into place.

Cleaning Your Carpet

Tips Before Cleaning

If cleaning an entire room, consider moving your furniture to another area.
Use a dry vacuum cleaner over area before using your deep cleaner.
Remove any large, solid debris before wet cleaning.
Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt.

Plug into a proper outlet.
Turn the machine ON by pressing the power switch.
Step on the recline pedal located below the power switch.
Make cleaning passes following steps below. Repeat these passes until solution being pulled up appears clean.
Empty the dirty water tank and refill the clean water tank as needed.

With Cleaning Formula

Hold Spray Trigger
- 1 pass forward
- 1 pass back
Release the Spray Trigger
- 1 pass forward
- 1 pass back

With BISSELL ANTIBACTERIAL Formula

Hold Spray Trigger
- 1 pass forward
- 1 pass back
- 1 pass forward
- 1 pass back

For full benefit of Antibacterial Formula, do not make any dry passes. Dry time may be longer.

IMPORTANT

Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique, or area rugs without a manufacturer’s tag.
Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Emptying the Dirty Water Tank

For maintenance how-to videos, visit support.BISSELL.com.

Turn OFF and unplug your machine.
Release dirty water tank by pulling out and up on the latches on the side
Carefully remove tank by lifting up on the dirty water tank handle.
Lift tab on the top of the tank.
To empty, pour out dirty water using opening at back of tank. Rinse the tank thoroughly. Reinsert tab into tank.
To continue cleaning, align the bottom of the tank to the base and secure into place with latches.

After-Cleaning Care

For more tips on maintaining your machine, visit support.BISSELL.com.

BISSELL-2806-Series-Turboclean-Powerbrush-Pet-26

Replacing the Belt & Brush Roll

For maintenance how-to videos, visit support.BISSELL.com.

BISSELL-2806-Series-Turboclean-Powerbrush-Pet-29

Storing Your Machine

Visit support.BISSELL.com for additional maintenance tips for your machine.

Store your machine in a protected, dry area. When finished using the product, wrap cord around cord wrap for storage.
NOTICE: To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal components may result.

Troubleshooting

For a comprehensive walkthrough of your product and support tips visitsupport.BISSELL.com.

This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more.