ShenZhen Shi Jie Cai Ke Ji You Xian Gong Si M3-WMICROA Megachic Wireless Microphone User Manual

ShenZhen ShiJie Cai Ke Ji You Xian Gong Si M3-WMICROA Megachic Wireless

Microphone

Introduction

Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
The wireless microphone consists of two parts, one is microphone transmitter, the other one is Lightning / Type-C receiver. (See as below picture)

ID Diagram

1. Microphone pickup hole
2. Power touch key
3. Microphone indicator
4. Type-C charging port of microphone
5. Monitor earphone port
6. Charging port of receiver for phone
7. Receiver indicator
8. Rope hole
9. Lightning / Type-C port to connect phone
10. Microphone clip
11. Signal hole,no indicator

Note: For the use of ⑥, there is no battery in Lighting / Type-C receiver, and no need to charge during live. If the phone is in low battery during live, it can be charged directly through ⑥ with a lightning / Type-C cable.

Specification

• Model Number: M3-WmicroA / M3-WmicroT Working Frequency: 2.4GHz
• Mic Charging Port: Type-C
• Charging Input Standard: DC 5.0V
• Mic Battery Capacity: 3.7V / 120mAh Charging Time: 1-1.5H
• Recording Time: 8H
• Disconnect Wait Time: 300s
• Sleep Standby Time: 120 days
• Recording Frequency: 50-15KHz
• Control Method: Touch

Packing List

• 1 x Microphone transmitter
• 1 x Lightning / Type-C receiver
• 1 x Type-C charing cable
• 1 x Monitor earphone
• 1 x User manual
• 1 x Carrying case

About UI

How to Use

1. Connect the receiver to phone with lightning / Type-C port. The indicator blue light flashes.
2. Long touch of microphone for 2 seconds, the indicator light turns blue.
3. The indicator blue light of receiver keeps on, then open the phone camera, live Apps or other Apps.
4. Click to toggle the state of the microphone. It will be mute when the indicator blue light is off.
5. Double click to power on or off monitoring, for monitoring the recording and background music.
6. Turn on the bluetooth of phone, search “K3” and connect. Plug the earphone in the monitoring earphone hole of microphone. The voice in Apps can be heard. When the battery of the microphone is below 10%, low battery alarm can be heard via earphone.
7. Long touch for 6 seconds to power off.
8. Plug off the receiver from phone, the receiver turns off.
9. The microphone will be charged when connected with Type-C cable. The indicator red light turns off when it is fully charged.
10. When the phone is in low battery, it can be charged through the receiver with Lightning / Type-C cable. It supports recording while charging.

Special Note

1. The microphone is IPX5 waterproof, do not soak in the water.
2. The clip on the microphone can be used to clip and hang on the collar without affecting the sound pickup of the device.
3. The red light flashing indicates low battery. Please charge it in time.
4. The maximum distance of microphone pickup is 1.5 meters. For better recording effect, place the microphone as close to the mouth as possible when recording.
5. The maximum distance between microphone transmitter and receiver is 20 meters. It is recommended within 15 meters.
6. Plug off the receiver when power off the transmitter.

Notice : Please contact us if you have any questions before leaving any review/feedback. We are always glad to answer within 24 hours.

CONTACT

jiecaikejisz@foxmail.com
+86 13246878550

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit differentmfrom that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>