STRONG LEAP-S1 4K Ultra HD Box User Manual
- June 6, 2024
- STRONG
Table of Contents
androidtv
4K Ultra HD Box
LEAP-S1
User manual
SERVICE CENTER
support_ua@strong.tv
**** +380 (44) 238 61 50
Supplied by STRONG Austria
Represented by STRONG
Ges.m.b.H.
Teinfaltstraße 8/4.Stock
A-1010 Vienna, Austria
Email: support_at@strong.tv
INTRODUCTION
Thank you for choosing the 4K Ultra HD Android TV Box supplied by STRONG. It has been produced with the latest new technology and offers extensive entertainment and great versatility. We wish you many hours of new great experiences exploring the Android world!
Safety Instructions
- Read all of the instructions before operating the device. Keep these instructions well for later use.
- Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery, etc.).
- Please refer to the information on the product enclosure for electrical and safety information before installing or operating the apparatus.
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, tablecloths, curtains, etc.
- The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- This mark indicates a risk of electric shock.
- To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
- The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.
- The battery (battery or battery or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.
- Excessive sound pressure from earphones and headphones can cause hearing loss. Listening to music at high volume levels and for extended durations can damage one’s hearing.
- In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening to high levels.
- The mains plug or appliance coupler is used as a disconnect device, it shall remain readily operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with a cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. The absence of a light indicator on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
- Attention should be drawn to environmental aspects of battery disposal.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- To prevent the spread of fire, keep candles or other open flames away from this product at all times.
- **** Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to the electrical earth.
Precautions
- Never try to open the device. It is dangerous to touch the inside of the device due to high voltages and possible electrical hazards. Opening the device will void the warranty of the product. Refer all maintenance or servicing to suitably qualified personnel.
- When you are connecting cables, be sure that the device is disconnected from the main supply voltage. Wait a few seconds after switching off the device before you move the device or disconnect any equipment.
- It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment. Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the device.
- Risk of explosion if the battery is replaced by an incorrect type.
- Disposing of a battery in a fire or a hot oven, or mechanically crushing or cutting a battery can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Operating Environment
- Do not install this equipment in a confined space such as a bookcase or similar unit.
- Do not use the set near damp, and cold areas, protect the set from overheating.
- Keep away from direct sunlight.
- Do not use the set near the dust place.
- Do not place candles near the opening area, to avoid flammable foreign material from entering the device.
WEEE Directive
Correct Disposal of this product. This marking indicates that this product
should not be disposed of with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmentally safe recycling.
Storage
Your device has been carefully checked and packed before shipping. When
unpacking it, make sure that all the parts are included and keep the packaging
away from children. We recommend that you keep the carton during the warranty
period, to keep your device perfectly protected in the event of repair or
warranty.
Equipment Set-up
Please follow the instructions below: Use a high-quality, well-shielded HDMI cable to watch also in the highest screen resolutions. This user manual provides complete instructions for installing and using this product. The symbols will serve as follows:
| WARNING: | Indicates warning information. |
|---|---|
| TIPS: | Indicates any other additional important or helpful information. |
| MENU | Represents a button on the remote control or the product. **(Bold |
characters)**
Move to| Represents a menu item within a window.
(Italic characters)
Package content
- Android TV Box
- Voice-Enabled Remote
- Power Adapter 12 V / 1 A
- HDMI Cable
- 2x AAA Batteries
- Installation instructions
WARNING: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed, or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used (e.g. NiMH), we recommend using types with low self-discharge to ensure long-time operation of your remote control.
Usage of external USB devices
- It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible with USB 2.0 specifications, playback and other functions of the product might not work properly.
- STRONG cannot guarantee compatibility with all types of USB devices such as webcams, keyboards, mouse devices, and storage devices.
- STRONG cannot guarantee perfect operation when an HDD and a webcam are used at the same time.
- If you are going to use external USB HDDs (Hard Disk Drives), please consider that power specifications may exceed the supported output of your box (max. 5 V/500 mA). If so, please connect your USB HDD to an external power adapter.
- It is advised not to store important information on USB storage devices used with the box. Always make backups of data on your USB storage device before using it with this box. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information.
TV BOX PANELS
Front Panel
-
Remote Control Commands Indicator
If blinking when using the Remote Control: pair the Bluetooth Remote Control to have all Google Assistant functionalities working. See 5.0 Settings/Bluetooth pairing -
Internet Connection Indicator
Green: Connected
Red: Not Connected -
On/Off Indicator
Green: Box On
Red: Box on Standby
Side Panel
- TF card slot
- USB 3.0 Port
- USB 2.0 Port
Rear Panel
- Power On/Off Switch
- 12 V Adapter
- Ethernet
- TV (HDMI)
- Audio/Video Output
- S/PDIF (optical)
- Infra Red eye (optional)
Remote control
- Power ON/OFF
- Microphone
- Google Assistant
- ▲/▼/◀/▶
- ENTER
- BACK
- HOME
- ALL APPS
- Volume
- Netflix, Prime Video
Installing the batteries
Fig. 5
Open the cover on the remote control and insert 2x AAA batteries into the
compartment.
The correct position of the batteries polar diagram is shown inside the
batteries compartment.
- Open the cover.
- Insert the batteries.
- Close the lid.
WARNING: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed, or used with other types of batteries.
CONNECTION GUIDE
Refer to the diagram below for connecting your Android TV Box to power,
network, and other devices.
( Note: Before getting started, please turn off all devices to be
connected.)
NOTE: The LEAP-S1 box also supports Wi-Fi. To connect, go to Settings -> Network.
- Connect the LEAP-S1 box to your television via the HDMI Cable.
- Using an Ethernet Cable, connect the LAN port of the TV Box to the LAN port of your router or home broadband network.
- Connect the TV Box to power using the power adapter provided. You can then power on your device and begin.
NOTE: Before turning on your device, please switch the signal input of the TV to the correct source
SETTING UP YOUR DEVICE
You may turn on your device after properly connecting all hardware.
To be able to use Google Assistant on your remote, you must first pair your
Bluetooth Remote to your TV Box. Follow the pairing instruction on the screen.
Step 1: Language
Select your preferred language on the Welcome Page.
Step 2: Set up with an Android device
Choose whether to set up your TV box with another Android/computer device or
skip this step. If you choose to Continue, please follow the guide to finish
the Google Quick Setup.
Step 3: Wi-Fi
Connect to your Wi-Fi Network. Skip this step if already connected via
Ethernet.
Step 4: Google Account
Sign in with your Google Account.
Step 5: Terms of Service & Privacy Policy
Read and accept the Terms of Services & Privacy Policy.
Step 6: Location Settings
Choose whether to allow Google to use your location to improve the experience.
Step 7: Diagnostic Report Settings
Select whether to allow your TV box to send automatic diagnostic and usage
data to Google.
Step 8: Meet your Google Assistant
Turn on the Google Assistant function for the functionality to work on your
remote.
Step 9: Get Started with Apps
Select apps you would like installed.
Step 10: Welcome to Android TV
A walkthrough of the features of your device
Click on DONE after the walkthrough to start using your device. You are now ready to begin
SETTINGS
Select Settings to check the device information, add/remove accounts, and make changes to the system settings.
Wi-Fi Settings
Under Network Settings, select and enable Wi-Fi in order to connect to the
network.
Once the device scans and lists nearby Wi-Fi networks, select the appropriate
network name, if required put in the password, and select Connect.
Language Settings
Under Settings > Preferences, select Language to change the language
previously set.
Bluetooth Pairing
- Select Settings in the Menu Launcher.
- From the Remote & Accessories menu, click “Add Accessory” then select the device to be connected.
Remove a Bluetooth Device
- Select Settings from the Menu Launcher.
- From the Remote & Accessories menu, click “Unpair”, then select the Bluetooth device you want to remove.
Adding Accounts
For new Google users: sign up for a new Google account using the TV for easier
login and payment security. Add an account or switch accounts under Accounts
in the Settings Menu.
Factory Reset
Under Settings, select Device Preferences > About > Factory Reset.
- Click Factory data reset to erase everything.
- Once this option has been selected, all manually installed apps and user data information will be deleted.
About
You can check information about your device by clicking on ABOUT in the
Settings Menu. This panel will show you the model of your device, version,
firmware version, and more. You can also update your system by clicking on
System update from this menu.
**DOWNLOADING APPS
**
All apps are available for download on the Google Play Store. Do not install apps via USB drive, Micro SD card, or hard drive.
GOOGLE CAST
Cast from a Mobile Device
Certain apps allow you to cast to your TV. To cast, simply follow the
following steps:
- Open a Google cast compatible app on your mobile device
- Navigate to the screen you wish to cast
Cast from Google Chrome
This device has Google Chromecast built-in. To cast from Google Chrome, click
the Settings icon [ ]: located on the top right corner of the browser, then
click “Cast”.
GOOGLE ASSISTANT
Say it to play it.
Ask it to play your favorite show, video, or music. Or find the latest
blockbuster to enjoy.
Movies & TV shows:
Play Stranger Things on Netflix. Video clips: Play cat videos.
Apps: Open YouTube. Search: Search for sitcoms.
Info: Tell me about Game of Thrones.
Control
Playback: Pause. Stop. Resume
Volume: Louder. Softer. Power: Turn off.
Play music, news, or podcasts
Music: Play music by Sia. (Learn how to choose your music service provider.)
News: Play the news. What’s the latest news from BBC?
Ask Google
Sports: How did the Patriots do? When is the next Warriors game?
Calculations: What’s 20% of 80? Dictionary: What does “ludic” mean?
Find answers: How far away is the moon? How do you remove stains on a rug?
Unit conversions: How many teaspoons are in a cup?
SIMPLE TROUBLESHOOTING
| Issue | Possible Reason | Solution |
|---|
No LED of menu display after
power on
| The power adapter is not properly connected| Make Sure the device is
connected to the power
No Sound| 1. The Tv is on Mute or the volume is low.
2. The device is on Mute or the volume is too low.| 1. Press the mute button
to restore the sound and increase the volume.
Failed to connect to the network| 1. Ethernet cable is not properly
connected.
2. Wi-Fi is turned off or the signal is too weak.| 1. Reconnect the cable.
2. Restart the Wi-Fi or adjust the position of the device closer to the
router.
Remote Control Failure| 1. The sensors of the remote control and the TV box
are not in alignment.
2. Remote control is broken or the batteries are low in power.| 1. Aim the
remote’s sensor at the front panel’s sensor and try again. Check for
obstructions blocking the signal path between the remote and the box.
2. Replace batteries or send the device to the local maintenance service
station for checking.
No Picture on Screen| HDMI cable is not connected| Make sure that HDMI/AV is
selected as your TV input
Voice search on remote is not working| The Remote is not paired to the TV Box|
See the Pairing Bluetooth Device section in this guide
No Audio| Audio Settings not configured correctly for your TV| Settings>
Device Preference > Sound > Select formats
Press OK to select”None” or try a “Manual” selection.
TECHNICAL SPECIFICATIONS
Video decoder
Aspect ratio:| 16:9, Auto/Fullscreen
Video resolution:| 2160p, 1080p, 720p, 4Kp60 10-bit H.265, 4Kp60 VP9 Profile
2, 4Kp30 H.264
Audio decoder
Audio decoding:| Dolby® Digital/ Dolby® Digital Plus*, MPEG-1 layer1/2
Audio mode:| Mono, L/R, Stereo
*Dolby Digital Plus, Dolby Digital, and the double-D symbol are registered trademarks of Dolby Laboratories
System & Memory
Android Version:| 10
Chipset:| Amlogic S905X2
CPU:| Amlogic S905X2 Quad Core ARM Cortex-A53, 1.8 GHz
GPU:| Quad Core ARM Mali-G31@1800 MHz
SDRAM:| DDR4: 2 GB
Flash:| eMMC: 8 GB
Connectors
HDMI
Ethernet
1x USB 2.0 + 1x USB 3.0 ports
Micro SD port
S/PDIF (optical)
AV
IR
DC IN (12 V,1 A)
General data
Wi-Fi:| IEEE 802.11b/g/n, 2.4 GHz
IEEE 802.11a/n/ac, 5 GHz
Bluetooth:| 4.2
Power supply:| 100 – 240 V AC, 50/60 Hz
Input voltage:| DC 12 V, 1 A
Power consumption working:| 7 W (max.)
Operating temperature range:| 0 ~ +40 °C
Storage temperature:| -10 ~ +70 °C
Dimensions (W x D x H) in mm:| 110 x 110 x 22
Weight:| 170 g
Data Protection: Please be aware that STRONG, its manufacturing partners,
the application providers, and the providers of the services may collect and
use technical data and related information, including but not limited to
technical information about this device, system, and application software and
peripherals. STRONG, its manufacturing partners, the application providers,
and the providers of the services may use such information to improve its
products or to provide services or technologies to you, as long as it is in a
form that does not personally identify you.
Additionally, please keep in mind that some services provided – already in the
device or installed by you – may request a registration form in which you have
to provide personal data.
Besides that, please be aware that some services which are not pre-installed
but can be installed may collect personal data even without providing
additional warnings and that STRONG cannot be held liable for a possible
breach of data protection by services not pre-installed.
- Availability of apps depending on the country. STRONG cannot be held liable for services by third parties. Offers by third parties may be changed or removed at any time, may not be available in all regions, and may require a separate subscription.