MISTEL Q75 2.4GHz + TypeC Mechanical Keyboard User Manual

2.4GHz + TypeC Mechanical Keyboard

User Manual

> Specification

Model: Q75
Keyboard Layout: ANSI / ISO / JIS
Keycap: PBT Double Shot / PBT Dye-sub
Keyswitch: Cherry MX Switch
Macro Function: Yes
Polling Rate: 1000hz
Matrix: NKRO
Media Keys: Yes
Onboard Memory: Yes
Dimensions: 311 (L) x 121 (W) x 40 (H) mm
Weight: 755g

> Package Accessory

Q75 Keyboard 1
USB Type-C to Type-A Cable 1
MiSTEL Keypuller 1
User Manual 1
Smart Dongle 1
Wrist Rest 1
3AAA Battery *2

If you need any other service or help with your new keyboard, please email MiSTEL at: services@mistelkeyboard.com

Warranty confirmation form Reseller

> Default Keyboard Layout

> LED Instruction

LED 1: CapsLock
LED 2: Macro
LED 3: Mac / Windows

> Macro Programming Instructions

– Macro keys cannot be assigned in the dafault layer.
– Macro keys cannot be assigned for Fn/Pn keys.

1. Choose Layer 1~3 (Pn+ </>/? )
   Press Pn + M / Pn + < / Pn+ > / Pn + ? to select the desired setting layer.
   a. Pn + M = Default Layer = LED 2 OFF
   b. Pn + < = Layer 1 = LED 2 light up once
   c. Pn + > = Layer 2 = LED 2 light up once
   d. Pn + ? = Layer 3 = LED 2 light up once

2. Press Fn + R_Ctrl to enter programming mode (LED 2 light up)

3. Press the key you want to program (LED 2 start flashing )

4. Key in the programming sequence then Press Pn to save the new setting.

5. Repeat step 3 and step 4 to program other keys.

6. Press Fn + R_Ctrl to exit programming mode (LED 2 light off)

> Remapping Function

– You cannot remapping in default layer.
– Remapping keys cannot be assigned for L_shift/R_Shift/R_Ctrl keys.

1. Press Fn + L_Shift for about 3 seconds (LED 2 start flashing)
   (For the Pn Key, Pn + L_Shift for 3 seconds, LED 2 start flashing)

2. Press any Key to choose a new position for Fn/Pn.

3. End of process.

> Reset Function

– Reset current single layer (to factory settings): Choose Layer 1, 2 or 3 then press Fn +R for about 3 seconds. (All led will flash 2 times)
– Full Keyboard Reset (to factory settings): Press R_Alt and L_Alt together for about 5 seconds. (All led will flash 5 times) (Warning: all programmed layers, macros and remaps will be lost.)

> Switching the Keyboard Layout

Press Fn + ” to switch layout (cycling); All led flash 2 time
Default layout: QWERTY.
QWERTY > DVORAK > COLEMAK > QWERTY…

* 2.4 GHz Dongle pairing

1. Plug in the dongle to PC.
2. Press Pn + Home around 3 seconds to start pairing.
   NOTE: If keyboard couldn’t find the device over 3 minutes, keyboard will stop pairing process.
   NOTE: If keyboard not working over 15 minutes, keyboard will go into sleep mode.
   *NOTE: Dongle Transmission distance: 8~10 Meters

Battery status: When the battery voltage falls below 2.2v, all led will start flashing once a second.

Under 2.4GHz mode, the indicator will light off after 10 seconds due to power saving.

> Windows / Mac OS Function Keys

Windows

|

Mac

---|---
Fn+F1: My Computer| F1: Decrease Screen Brightness
Fn+F2: Browser| F2: Increase Screen Brightness
Fn+F3: E-Mail|

F3: Mission Control

Fn+F4: Media Player|

F4: Launchpad

Fn+F5: Previous Track|
Fn+F6: Next Track|
Fn+F7: Play/Pause|

F7: Previous Track

Fn+F8: Stop|

F8: Play/Pause

Fn+F9: Volume Up|

F9: Next Track

Fn+F10: Volume Down|

F10: Mute

Fn+F11: Mute|

F11: Volume Down

Fn+F12: Calculator|

F12: Volume Up

*For Mac OS layout: Make sure to enter the Mac mode. (Fn+S; LED3 light up)

> Action Keymap

FN General keys

FN| +| I| =|

↑

J

| ←
K|

↓

L

| →
P|

PrtSc

[{

| ScrLk
]}|

Pause

CapsLock

| Caps/L_Ctrl position exchange
“ ‘|

Keyboard Layout Change

: ;

| Ins
Y|

Calculator(windows)

R

| Reset single layer
L_Win|

Win Lock/Unlock

A

| Windows OS(Default)
S|

Mac OS(Led 3 light up)

Layer Function

|

Remark

---|---

FN

| +| M| =| Default|

LED2 is off

< ,| Layer 1|

LED2 flash once

.

| Layer 2|

LED2 flash once

? /| Layer 3|

LED2 flash once

> How to Upgrade The Firmware (Only available on Windows OS)

1. Download new firmware from MISTEL web site.
2. MISTEL can also send new firmware to you by direct mail. Remember to convert the files from .ex to .exe format to make it an executable file.
3. Connect your keyboard and computer. Start the firmware update program and press OK to update to the new firmware.

> Keyboard Warranty Description

This warranty does not cover problems or damage resulting from, but not limited to, any of the following:
– Wear and tear associated with normal use.
– Any unauthorized modification or repair, accidental damage or disassembly.
– Any improper operation, including any use not in accordance with any supplied product instructions.
– Connection to any improper voltage supply.
– Any other case which does not relate to a product defect in material or manufacturing.

> FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>