HiFuture SMARTPODS 2 True Wireless Earbuds User Manual
- June 6, 2024
- HiFuture
Table of Contents
- HiFuture SMARTPODS 2 True Wireless Earbuds
- Unboxing
- Device Overview
- Auto-on & Pairing & Auto-off
- **Tap Instructions
- Factory Rest
- Important Safety Instructions
- Safety cautions
- Indicators’ Descriptions
- Battery
- Charging
- Voice prompt
- Cleaning & maintenance
- Troubleshooting
- Customer service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HiFuture SMARTPODS 2 True Wireless Earbuds
Unboxing
Device Overview
Auto-on & Pairing & Auto-off
- A: Ensure to remove stickers from both buds and charge fully before using. After that, open the top cover to Power on.
- B: Tap „HiFuture SmartPods 2“ from the smartphone’s Bluetooth menu. There s a voice prompt „Your Device is Connected“ after successful connection.
- C: Both buds will be AUTO OFF after putting into the case and with the cover closed for approximately 3 seconds or disconnected with a smartphone over 5 minutes.
- Please charge earbuds before using them.
**Tap Instructions
**
Manual OFF
Long tap L and R earbuds for 5 seconds to Power OFF in free mode (Music, Calling and Gaming Modes invalid)
Manual ON
While earbuds are in OFF mode, Long Tap L and R earbuds for 2 seconds to Power ON.
Factory Rest
- Step 1, Place both earbuds into the charging case
- Step 2, Do not close charging case cover
- Step 3, Hold rear multi-function button for approximately 8 seconds until indicator lights flash
- Step 4, Remove “HiFuture SmartPods2” from your Device’ s Bluetooth list
- After Reseting, delete the paired “HiFuture SmartPods2” from your devices and re-pairing it.
Important Safety Instructions
- Please do not use device near any form of heat sources.
- Please use accessories specified by the manufacturer.
- Please refer all services to qualified personnel should there be any form of damage to the device.
- Keep this user manual for future reference/troubleshooting.
- Please heed ALL safety cautions.
Safety cautions
- Always keep device AWAY from fire and heat sources.
- Do Not attempt to disassemble or alter the device.
- Do Not expose the device to excessive heat. (Direct sunlight e. g.)
- Do not immerse/expose device to any form of fluids.
Warning
- Using earphones at moderate to high volumes for extended periods of time will result in permanent hearing damage.
- We recommend that you keep media playback volume level from low to moderate at all times.
- Please do not use earphones while performing activities that require hearing surrounding noises/sounds. (Driving, Cycling, joggling etc.)
Indicators’ Descriptions
- Without Charging cable
Battery Low| Open/Close
Top Cover
| Short Press rear
Multi-Button
| Charging earbuds
in the case
---|---|---|---
Put earbuds into the case| LED1 flashes quickly| LED1 light up for 10 seconds
and turn
off automatically
| LED2 flashes 5 seconds and turn
off automatically
- Charging by external TYPE-C cable
- Resetting Indicators
Battery
-
*SmartPods2 powers off automatically after 5 minutes of inactivity
** -
*SmartPods2 has up to 4 hours playback time +20 hours with charging case
** -
**Tested by Medium Level Volume by IOS 14.3 device with POP music***
Charging
Use Type C charging cable to charge.
- Recommended Charging voltage: 5V@500mA to 1A
- SmartPods2 powers off automatically after 5 minutes of inactivity*
- Battery will be discharged automatically is left unused over a long period of time*
Voice prompt
- “Power ON”
- “Pairing”
- “Your device is connected”
- “Your device is disconnected”
- “Battery Low”
- “Power OFF”
- “Min.& Max. Volume Alarm“
- “Reject or End Call Alarm“ *Available for some Android phones, not supported on IOS phones
- “Reset Succeed Alarm“
- “Gaming Mode ON“
- “Gaming Mode OFF“
- *The Gaming Mode is designed for Game Playing which enables lower Bluetooth latency, it might lower the connection quality while in Music Listening with this functionary ON.
Cleaning & maintenance
Wipe down SmartPods2 with a soft dry cloth. Remove silicone ear-tips and clean with cotton buds.
Troubleshooting
I can’t find “HiFuture SmartPods2” on my Bluetooth devices list/an unstable connection.
- Make sure “SmartPods2” and your device are within Bluetooth working distance.
- Make sure SmartPods2 is charged and has enough power.
- Perform a factory reset and re-attempt to pair again.
Disconnection occurred within Bluetooth working distance.
- Please make sure there are no metals or other materials within a relatively close range which will interfere with the Bluetooth connection.
The tap controls don’t seem to be working.
- Check if the earbuds are connected to your Bluetooth device. Recommended devices operating system -1OS8,0/ Android 4.3 and above.
- Tap sensors are only activated 1 second after a successful connection to avoid misoperation.
Customer service
- For more product information please visit www.hifuturegroup.com
- Contact your local authorized dealer/ customer service. Refer to the warranty label provided in the box.
- -Email: info@hifuturegroup.com
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
- Home | HiFuture Group
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>