HiFuture FutureTour Bluetooth and Noise Canceling Headphone User Manual

HiFuture FutureTour Bluetooth and Noise Canceling Headphone

Specifications

• Product Name: FutureTour Bluetooth & Noise Canceling Headphone
• Microphone: Yes
• ANC Switch: Yes
• LED Indicator: Yes
• Charging Port: TYPE C
• Audio Jack: 3.5mm
• Volume Control: Yes
• MFB (Multi-Function Button): Yes

Product Usage Instructions

• When unboxing the FutureTour Bluetooth & Noise Canceling Headphone, please ensure that all components are undamaged.
• If you notice any damage, please refrain from using the product and contact your local authorized HiFuture distributor or customer service.

Note: The headphones will be powered OFF while charging and connecting with the 3.5mm audio jack.

After resetting the headphones, ignore the HiFuture FutureTour from your device(s).

Note: With both Bluetooth (BT ON & Connected) and ANC ON, the Cyan LED indicator will always be ON.

How to connect to FutureTour

1. Power on the headphones by holding the MFB button for 2 seconds (Blinking Blue/Red indicator).
2. Hold the headphones next to the Bluetooth device (unlocked and with Bluetooth enabled).
3. Connect the headphones to your phone or other Bluetooth devices.
   Find and select the HiFuture FutureTour on your phone or other Bluetooth devices.

Noise Cancelling

The noise cancelling feature is designed to block constant, low-frequency noises and is excellent for train or bus travel. To enable the noise cancelling feature, switch the ANC button to the ON position. The indicator will light up in Green. Please note that although noise is reduced, it is not completely cancelled.

FAQ

• Q: What should I do if any of the components are damaged?
• A: If you notice any damage to the components, please refrain from using the product and contact your local authorized HiFuture distributor or customer service for assistance.
• Q: Can I use the headphones with all smartphone brands?
• A: The compatibility with smartphone brands may vary. Please refer to your smartphone user manual to check compatibility.

Unboxing

Please refrain from using any damaged components. Contact your local authorised HiFuture distributor/customer service.

Summary of button functions

1. Microphone
2. ANC Switch
3. LED Indicator
4. TYPE C charging port
5. 3.5mm Audio Jack
6. Volume – /Previous Track
7. Volume + /Next Track
8. MFB (ON/OFF/Play/Pause/Activate Voice Assistant)

Button Operations

• (Multi-Function Button Instructions)

Line No.| Require Action| Status| Operations| Voice Prompt| Indicator (LED)
---|---|---|---|---|---
1|

POWER ON

|

POWER OFF

| Press and hold the “MFB” Button for 2 seconds|

Power ON

|

Blinking Blue & Red

2|

PAIRING

|

POWER ON

|

After Power On

|

Pairing

|

Blinking Blue & Red

3|

CONNECT TO DEVICE

|

POWER ON

| Select the headphones on your device| You are connected to HiFuture|

Blue always ON

4|

DISCONNECT

|

PAIRED

| Out of range or disconnected from devices| You are disconnected from HiFuture|

Blinking Blue & Red

5

|

ANC OFF

|

ON

|

ANC Switch to OFF

|

ANC OFF

|

Blue lights ON

6

|

ANC ON

|

OFF

|

ANC Switch to ON

|

ANC ON

|

Green lights ON*

7

|

POWER OFF

| |

PRESS “MFB” FOR 2 SEC.

|

Power OFF

|

Red Blinks 2 times

8

|

BATTERY LOW

| | |

Battery Low

|

Red flash 1 time /3 Sec.

9

|

CHARGING

| | |

/

|

Red lights ON

10

|

FULLY CHARGED

| | |

/

|

Red lights OFF

11

|

AUTO-OFF*

| |

Disconnected after 5 min.

|

/

|

Red Blinks 2 times and OFF

12

|

RESET*

|

POWER ON

| Press and hold both “Vol+&Vol-” Buttons for 3 seconds| You are disconnected from HiFuture, Pairing|

Blinking Blue & Red

• The headphones will be Powered OFF while charging and connecting with a 3.5mm audio jack.
• Ignore the HiFuture FutureTour from your device(s) after RESET the headphone.
• With both BT(BT ON & Connected ) & ANC ON, Cyan is always ON.

Vol./Music/Phone Call/ ANC Operations

Playback Functions
Play / Pause track| Push the MFB button once
Skip to the next track| Hold Volume + for 2 seconds
Go to the previous track| Hold Volume – for 2 seconds
Call Functions
Answer / end a call| Push the MFB button once
Reject a call| Hold MFB for 1 second then release
Redial last call| Push the MFB button Twice
Activate Voice Assistant
Activate IOS Siri or Android Assistant| Push the MFB button 3 times
ANC ON/OFF
ANC ON| ANC Switch to ON
ANC OFF| ANC Switch to OFF

Not compatible with all smartphone brands; please check your smartphone user manual.

How to connect to FutureTour

• Step 1. Power on the headphones by holding the “MFB” button for 2 seconds (Blinking Blue/Red indicator)
• Step 2. Hold the headphones next to the Bluetooth device (unlocked and with Bluetooth enabled)
• Step 3. Connect the headphones to your phone/other Bluetooth devices. Find and Select the “HiFuture FutureTour ” on your phone/other Bluetooth devices.

Noise Cancelling

• Noise cancelling feature designed specifically to block constant, low-frequency noises, and is excellent for train, or bus travel. To enable noise cancelling feature, switch the button to ON position, the indicator will light up in Green.
• Although noise is reduced, it is not cancelled completely.

Charging the Battery

The headphone is convenient to connect to an AC charger or a USB charger with a Type-C port. Make sure that your headphones are fully charged for at least 3.5 hours before initial use. Make sure to use the qualified charger (DC 5V@1A) to charge your headphone.

Hints and Tips

Product not working

• Recharge the product.
• Ensure the product is switched on.
• Ensure your Bluetooth-enabled device’s wireless function is active.
• Ensure there are no other wireless devices in discovery mode.
• Move the product closer to the device.
• Pair again the product and the device.

CONTACT

• Made by ShenZhen Future Access Technology Co., Limited
• www.hifuturegroup.com. Designed in the USA, Assembled in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>