HiFuture OlymBuds2 TWS Earbuds Led Power User Manual

June 9, 2024
HiFuture

HiFuture -logoHiFuture OlymBuds2 TWS Earbuds Led Power-

OlymBuds2
User Manual

OlymBuds2 TWS Earbuds Led Power

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
****www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Package Contents

HiFuture OlymBuds2 TWS Earbuds Led Power-fig1

Please refrain from using any damaged components. Contact your local authorised HiFuture distributor/customer service using the means provided on the previous page.

  1. EarBuds indicator
  2. Tap area
  3. Microphone
  4. Charging interface
  5.  Charging case battery display

HiFuture OlymBuds2 TWS Earbuds Led Power-fig2

Before using the OlymBuds2 for the first time, please, fully charge them.

Instructions for Use

Automatic Turn On & Pairing
Remove stickers from both earbuds and ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red for about three to five seconds, wait until the right bud flashes blue and red. Pairing of both earbuds is now complete.
If your smartphones Bluetooth menu, choose “HiFuture OlymBuds2”. The connection of your earbuds with your phone is completed when you hear the voice prompt saying: “You are connected to HiFuture”.
Manual Turn On & Pairing
Take out both buds and long tap both earbuds for two to three seconds until the indicator lights up – this means the earbuds are turned on. To turn off the earbuds, take both buds and long tap either left or right earbud for five seconds until the indicator lights up orange for one second. To manually pair the earbuds, although it is not recommended, double tap both earbuds when they’re turned on.
Reset
First, make sure the OlymBuds2 are disconnected from your phone or other Bluetooth devices.
Put both earbuds into the charging case for five seconds until the indicator lights off. Then, take out the earbuds and quickly tap both earbuds five times. After you hear a prompt sound, you will know that the OlymBuds2 had been reset successfully. When you put the earbuds back into the charging case, OlymBuds2 are ready to be used again.

Multifunction Button Instructions

| Twin Earbuds| Single Earbud
---|---|---
Earbuds| Left| Right| Left/Right
Power on/off| oo| 0| 0
Answer/end call| •| •| •
Reject phone call| c| c| o
Pause/play music| •| •| •
Next track| /| c| o
Previous track| o| /| /
Volume up| /| ••| /
Volume down| ••| /| /
Activate phone’s
voice assistant| •••| •••| •••
Re-dial last number| ••••| ••••| ••••
Factory reset| •••••| •••••| •••••
• Single tap
•• Double tap
••• Triple tap
•••• Tap four times| ••••• Tap five times
○ Long tap for two seconds
○○ Long tap for five seconds
/ No function
---|---

Safety Notes

  • Read these safety instructions carefully.
  • Keep these safety instructions.
  • Pay attention to all warnings.
  • Follow all instructions.
  • Only clean the earplugs with a dry cloth.
  • Choking: The appliance contains small parts and is not suitable for children.
  • Do not place the device near heat sources such as radiators, hot air regulators, fireplaces or heat generating speakers (including amplifiers).
  • Do not use the device in places where you need to concentrate on the surroundings, such as while driving and the like.
  • Do not immerse the device in water or expose it to a humid environment for a long time. Do not use it while swimming or surfing.
  • High music volume can cause hearing loss over time. If you experience tinnitus (ringing in your ears), pain, or discomfort after using your ear audio device, the volume is probably too high for your ears.
  • To prevent hearing loss, turn down the volume of the music player before connecting it to your mobile phone, and then gradually increase it to a comfortable volume.
  • It is recommended to use the accessories specified by the manufacturer.
  • Do not expose the battery to excessive heat such as sunshine, fire or the like.
  • Make sure that the power supply is within the specified voltage range.
  • If the device does not charge with AC power, unplug the cable from the USB interface.
  • Rely on our staff. If a fault occurs on the device, it must be repaired by a professional. The headphones do not work properly if: the power cord or plug is damaged, there is water in the device, foreign objects have fallen into it, the device is exposed to rain or moisture, or if it falls from a height.

Tips

  • Before using the headset, please read the manual carefully and keep it for future references.
  • The headset needs to be fully charged prior to first-time use.
  • If the headset is left unused for over two weeks, please recharge it periodically.
  • Please use the chargers made by qualified manufacturer.
  • If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the
    product.

  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).

  • Natural wear and aging of consumables or components during use (such as batteries, etc.).

  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.

  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

 EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Earbuds
Model / Type: HiFuture OlymBuds2

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
**** Prague, 19.11.2022

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

HiFuture -logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals