HiFuture FutureMate Pro TWS Earbuds User Manual

HiFuture FutureMate Pro TWS Earbuds

PACKAGE LIST

• FutureMate Pro

• Charging Case

• User Manual

• Type-C Charging Cable

Please refrain from using any damaged components.
Contact your local authorised HiFuture distributor/customer service.

DEVICE OVERVIEW

1. Tap area

2. Earbuds indicator light

3. Microphone

4. ENC microphone

5. Earbuds charging connector

6. Reset button

7. Type-C charging port

8. Charging case indicator light

TAP CONTROL

CONNECT THE EARBUDS

1. Power on the earbuds and turn on the Bluetooth in your phone.

2. Tap “Hi Future Future Mate Pro” form the smartphone’s Bluetooth menu.
   There’s a voice prompt “You are Connect to HiFture” after successful connection with smartphone.

HOW TO RESET THE EARBUDS

If your earbuds stop syncing with each other, please follow below steps to reset the earbuds：

1. Make sure the earbuds were disconnected with phone or other Bluetooth devices.

2. Put the two earbuds into the charging case, close the case and then open it again (you will hear “Power on, paring” prompt sound).
   Keep the charging case open during the reset process, long press the case button for 5S. The white LED on the case will flash 6 times, and the white LED on the earbuds will flash 3 times, which means the reset is successful and the pairing records are cleared.
   

3. The earbuds will sync together and enter the pairing mode automatically

IMPORTANT NOTES

1. Before using the FutureMate Pro wireless earbuds, please charge both the case and earbuds.

2. If both earbuds don’t sync together, please reset the earbuds.

3. If the earbuds don’t charge, please clean the charging slot on the case and the contact surface on the earbuds.
   

POWER ON

Automatically

Make sure both earbuds are in the charging case, then open the case. The indicator light of the headset will flash once, and there will be a tone of “Power On”.

Manually

Long Tap L &  R earbuds 3s until indicators light up, and there is a prompt tone “Power On”

Automatically

Both earbuds will be AUTO OFF after put into the case or disconnected with smartphone over 5 minutes.

Manually

Long Tap L & R earbuds 5s until indicators light off, and there is a prompt tone “Power OFF”

Note: When the charging case is at low battery or out of power, the earbuds will not automatically power on/off, please turn them on/off manually.

WEARING

1. Put the earbuds on your ears.

2. Rotate the earbuds to adjust to the comfortable angle

CHARGING

Please fully charge the FutureMate Pro after unboxing. Use Type-C cable to charge the charging case.

INDICATORS’ DESCRIPTIONS

1. Earbuds
   Power on| Power of| Pairing| Connected| Battery low| Fully charged
   ---|---|---|---|---|---
   LED flashes white once| LED flashes white once| One of the earbuds flashes quickly| LED of| Low battery warning every 2 minutes| LED of

2. Without charging cable
   Battery Low| When put earbuds into the case and charging
   ---|---
   LED flashes red 3 times| LED flashes white 3 times then flash slowly for 10S, then LED off.

3. Charging by external TYPE-C cable
   Charging| Fully Charged
   ---|---
   LED flashes red slowly| White always on

CUSTOMER SUPPORT

Hereby, SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED declares that the radio equipment type HiFuture earbuds. mentioned in this manual is in compliance with Directive 2014/53/EU.

Manufacturer: SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED Address: B-206, Block B, Tsinghua Unis Inforport, Hi-Tech Park(North), Nanshan District, Shenzhen, China.

eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main.Germany
contact@evatmaster.com
OST_ EU 20220713000004
HUA TENG LIMITED
3 Glass Street, Hanley,
Stoke On Trent,ST1 2ET
United Kingdom
For more information, please visit:
For any assistance, email us:
info@hifuturegroup.com
For any assistance, email us:
www.hifuturegroup.com

References

• Home | HiFuture Group

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>