Shenzhen Midason Technology K7 3-In-1 Wireless Charging Station User Manual
- June 6, 2024
- Shenzhen Midason Technology
Table of Contents
Shenzhen Midason Technology K7 3-In-1 Wireless Charging Station
Product Introduction
It is a multi-function 3-1 wireless charger, which supports the charging of
iPhone 12 series mobile phones,iWatch, Airpods and other devices that support
Qi standard.
Support USB output, type-C input, it is a convenient and practical intelligent
electronic device.
- When the equ ipment is energized, the working light is red;
- When the device is charging, the working light turns blue;
Product details
When multiple devices work at the same lime, it is recommended that the input
power is above 18W, otherwise the output power will be insufficient or
unstable
This wireless charger provides a maximum of 15w power output totally for
devices. It supports 15W, 10W, 7.5Wand 5Wfor Qi-enabled smart phone; 2.5W for
Apple Watch; 3W for AirPods.
The USB port supports 5W power output. (USB port not suggested for charging
phone)
Packing list
1 3 in 1 wireless charging station
1 Type-C charging cable
1 User manual
1 Colour box
Specification :
| Model: | K7 |
|---|---|
| Interface: | Type-C |
| Input Current: | ≥ 9V-2A; 5V-3A |
| Mobile Output: | 15W/10W/7.5W/5W |
| Watch Output: | 2.5 W |
| Ai rpods Output: | 3 W |
| USB Output: | 5 W |
| Adapter requirements: | ≥ 9V-2A |
| Size: | 112.8mm x 70.5mm x 120mm Support the QI enabled Mobile phone TWS |
Bluetooth Earphone and Apple Watch
Attention:
-
Not applicable for galaxy watch ,just for iWatch 1 /2/3/4/5/6/SE, but can be applicable for galaxy earbuds/AirPods and any Qi-Enabled phones
-
Case ≤0.23inch Friendly, but pis remove the magnetic or metal accessories from the phone case when charging
-
Applicable for iPhone 12 series,but as the iPhone 12 iOS bug, please restart your iphone 12 series if can’t charge, any problem, please message us first, great thanks!!!
-
The phone/airpods/ iWatch get hot but not exceed 45 degrees is normally when charging ,once the temperature exceed 45 degrees,the wireless charger will stop charging your phone automatically until the temperature drops ,this is just the overheating protection
Temperature Control -
Pls do not charge in high temperature or humid environment to avoid circuit damage.
-
We recommend to use QC2.0/3.0 9V/2A adapter when charging phone/iWatch/Airpods 3 devices at the same time.If you want to charge dual phones/iWatch 3 devices at the same time, pis use 9V/3A AC adapter.
-
People who use cardiac midwifery should consult a doctor before using the wireless charger, and keep more than 50cm away from it. Electromagnetic waves will affect the work of the cardiac midwifery device.
Warranty and after-sales service:
In the case of initial defects within 1 year from the date of purchase, as
well as failures, breakages, and other defects that occur within the normal
range of use, we will take various measures, so please rest assured.
For repairs, replacements, returns and refunds during the warranty period,
please contact [email protected]
Please contact [email protected] for
how to use and the parts you don’t understand during use.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonableprotection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with theinstructions, may cause harmful interference to radio
communications.
However, there is noguarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which canbedetermined by turning the equipment off and
on, the user is encouraged to try to correct theinterference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement.