TakTark BM923 Video Baby Monitor User Manual

: June 6, 2024
: TakTark

TakTark BM923 Video Baby Monitor

WELCOME to …
Your New Digital Baby Monitor!

Thank you for purchasing this product. Now you can see and hear your baby sleeping in 1!111
the bed room or monitor your children playing in playroom. This User’s Guide provides lalil most of the information you need to know to use this product.
We recommend you charge the parent unit before using it, so that it can continue to work if you disconnect it from the charger or carry it to another location. Please read the Safety Instructions before installing the product.

Got Everything?

1 x Parent Unit
1 x Baby Unit
2 x Power Adapters

Overview of Your Baby Monitor

Parent unit:

LCD Screen
Microphone
Power/Signal Indicator
PTT Key
Zoom Key
Power I Return Key
Volume+/ Up Key
Right Key/ Brightness +
Menu/ OK Key
Speaker
VOX Key
Left Key/ Brightness –
Volume -/ Down Key
Power Adapter Port

Baby unit:

Light Sensor
Camera Lens
Infrared LEDs
Power Indicator
Microphone
Speaker
Pair Key
Temperature Sensor
Power Adapter Port

Safety Instructions

WARNING
This baby monitor complies with all relevant standards regarding electromagnetic fields and f!!III can be used safely when operating in accordance with the instructions in the user guide.
Therefore, please read the instructions in this user guide carefully before using the device.

An adult is required to install. Keep small parts away from the children when assembling.
This product is not a toy. Do not allow children to play with it.
This baby monitor is not a substitute for responsible adult supervision.
Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
Keep the cords out of the reach of children.
Do not use the baby monitor near water or a heat source.
Only use the power adapters provided.
Do not touch the plug contacts with sharp or metal objects.

Getting Started

How to power the baby unit?

Note: There is no battery built in the camera. It must be connected with a power adapter while working.
Plug the small port of the power adapter into the baby unit and the other end into an electrical outlet.
NOTE: Use only the power adapter provided.
A blue indicator will light up when the baby unit is running. (Optional)

How to charge the parent unit?

Charging the parent unit fully before use is recommended. The unit operates on the battery in the event of a power failure.
Plug the small port of the power adapter into the parent unit and the other end into an electrical outlet.
NOTE: Use only the power adapter provided.
The charging indicator will light up, which means the battery is charging.
Press and hold power key for at least 3 seconds to turn on the parent unit.

Using the Baby Monitor

Setting up

Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

NOTE:

Do not place the baby unit within the reach of baby! If there is any interference in the image or sound, try moving the units to different locations, and ensure they are not too close to other electrical equipment.

About Echo:

If the monitor stays too close to the camera, an echo may be heard. Then keep them away or lower the volume, the noise will disappear.

Registering Camera
The baby unit has already been registered. You do not need to register it again unless the baby unit loses connection with the parent unit. Learn section ‘5.2 Camera Registration’ for more details.

Night Vision
There are 6 infrared LEDs for picking up clear images in the dark.

Voice Function
Press and hold PTT key on the parent unit to speak to your baby through the baby unit’s loudspeaker. A microphone icon will appear at the bottom of the screen.

Adjusting the Volume
In the monitoring interface, press Volume- key to decrease volume or Volume+ key to increase volume. The display will show the current volume for 3 seconds.

VOX Function
Press VOX Key to activate VOX mode. In VOX mode, the screen will go into sleep automatically to save energy. It will reactivate automatically, when it detects any sound that reaches to the Mic on the camera. Press VOX Key again to return to Normal mode.

Adjusting the Backlight
In the monitoring interface, press “Left” key to decrease the brightness of the backlight or “Right” key to increase it. The display will show the current backlight icon for 3 seconds.

Zoom Function
At the monitoring interface, press “zoom key” to zoom in the image on the screen. There are two levels of magnification (switching in cycle).

Audio Mode
At video monitoring interface, click “Power I Return Key” to activate audio mode. In audio mode, the screen will be turned off, but audio transmission keeps on working. It can save power when you don’t need images. Click any button to exit audio mode.

Monitoring Screen Icons

Press “OK / Menu” Ke at monitorin interface to enter the main menu. It contains 6 items:

Camera

Camera Registration

Press the “Menu / OK” key to the enter the registration interface. Press the “Menu / OK” key again, then the prompt box of “Re-Register Camera” comes out. Press the pairing key on the back of the baby unit within 10 seconds to complete the registration.

Intercom Volume
You can set the intercom volume heard on the baby unit at Low / Medium / High. This setting is only valid for intercom.

Camera Power Light
You can decide whether to turn off the power indicator on the camera while the camera is running.

Alarm

Press “Menu / OK” key to enter edit mode, “Up / Down” key to skip to the next item and “Left / Right” key to change value.

Settings

Time
There are two items in this menu: Set Time / Set Format.
Press “Menu / OK” key to choose the item, “Up / Down” key to skip to the next item and “Left/ Right” key to change value.

Temperature Unit
Switch the unit to Celsius or Fahrenheit.

Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to suit your local power frequency for anti-flicker.

Keypad Tone
You can turn the keypad tone on or off, and there are three key tones to choose from.

Alerts Tone
You can turn on or off the alerts tones of low battery and interrupted connection. There are three alerts tones to choose from.

Monitor LED Light
You can switch the brightness of the indicator on the monitor at: Low/ Medium/ High.

LCD Backlight
You are be able to adjust the brightness of screen and the active time of LCD backlight at menu interface.

VOX

System mode
This menu allows you to choose the working mode from the following: Normal mode / VOX mode.

VOX sensitivity
Switch the Vox sensitivity at Low/ Medium/ High Level.

Language

You are be able to choose your language from the following: English/ Franvais /Espanol/ Portugues / Italiano/ Deutsch I Turkye / Pycc•

System info

It contains system information such as hardware version, software version etc.

TECHNICAL FEATURES

Frequency: 2.4 GHz Digital
Modulation Mode: GFSK
Operating temperature: -10 to +45°C
Operating Humidity: <85%
Range: 260m in unobstructed open field (The walls, windows, doors and stairs will weaken the signal.)

Monitor