GOFREETECH GFT-M009 2.4G Wireless Mouse User Guide
- June 6, 2024
- GOFREETECH
Table of Contents
GOFREETECH GFT-M009 2.4G Wireless Mouse
Product features
- 2.4G wireless connection, operating range 10 meters.
- PAN3212 sensor, low power and high perfonT1ance.
- DPI 800/1200/1600/2000/2400.
- IR light tracing technology, works on most surfaces.
- Energy saving design with low power indicator.
Before use:
- Find the wireless mouse and Nano receiver in the box.
- Plug the Nano receiver into a USB port on the Computer.
- Install the AA battery into the Mouse.
- When the LED indicator twinkle, your mouse is ready for work.
Product specification
- OPI adjustable function: With 5 adjustable DPI functions 800/1200/1600/2000/2400 the initial factory setting.will be on a default of 1200DPI. Press the button on top of the mouse to adjust DPI settings (check picture for the button). The LEO indicator will flash once while it is converting to B00DPI, twice while it is converting to 1200OPI, three times while it is converting to 16D0OPI. Four times while it is converting to 2000DPI and five times while it is converting to 2400DPI.
- Power Saving: If your mouse is inactive for 8 minutes, it will go into power saving mode, press any button to restart it.
- Nano receiver: The Nano receiver is very small in design, it can be plug into a USB port on the oomputer. The Portable design is ideal for travel. The Nano receiver can be store in the slot next to the battery housing.
- Side buttons: There are two side buttons on the side of the mouse, the default setting is forward and backward.
Reconnection
- Re-p(ug the receiver.
- Press and hold the right button and middle button (scroll wheel button) for 3 seconds.
- The DPI indicator will light up for a few seconds and then switch off once connected.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detenTlined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause hanT1fut interference
- this device must accept any interference received, induding interference that may cause undesired operation.
California Proposition 65
WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive HanTl From (Name of one or more chemicals known to cause reproductive toxicity] Exposure• www.P65Wamings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>