Podoru KT-D009 Wireless Portable Charger User Manual
- June 9, 2024
- Podoru
Table of Contents
Podoru KT-D009 Wireless Portable Charger
Product parameter
- Name: Magnetic Power Bank
- Model Number: KT-D009
- Battery model: polymer battery
- Material: Fireproof ABS + PC
- Battery capacity: 10000mAh
- Rated capacity: 5800mAh
- Energy conversion: ≥ 75%
- Bracket Angle: 60°
- Product size: 104x68x21mm/4.09×2.68×0.86 inch
- Net weight: 189g/6.67oz
- Wireless charging output: 5W, 7.5W, 10W, 15W
- Lighting input: 9V 3A
- Type-C input: 5V 3A, 9V 2A
- Type-C output: 5V 3A, 9V 2.2A, 9V 2A
- USB output: 5V 3A, 9V 2.2A, 12V 1.5A, 5V 4.5A, 4.5V 5A
Overview
- Wireless Charging Area
- Magnetic Attraction Position
- Lighting Input Port
- Fold-Out Stand
- USB Output Port
- Power Display
- Type-C Output/Input Port
- Power Button
Packing List
Product description
This product is a portable charging device that can provide wired charging and
wireless charging for mobile phones, tablets, e-books, game machines and other
famous products. The product has the characteristics of wired charging and
wireless charging in one, magnetic suction positioning, power digital display,
foldable bracket, ip20w PD fast charging, three output
(including wireless output), 15W wireless fast charging, Lighting Interface,
etc. Product built-in FOD, overcharge, over discharge, temperature protection
and other safety protection circuit.
Checking quantity of electricity :
Press on/off button check the remaining electricity of the power bank on the
Led display. The display will automatically turn off after about 30 seconds;
Wireless Charging the iPhone 12 Series or Later
To activate wireless charging, press the power button or place your device on
the charger as illustrated below and it will be held in place magnetically.
Note: After the phone is placed correctly, there may be a delay of 3-5
seconds, the product will automatically turn on the charging mode. If there is
no wireless load access within 30 seconds, the product will automatically turn
off the wireless charging function.
Wireless charging tips
Wireless charging mobile phone needs to place the wireless charging area of
the product (see the illustration for the wireless charging coil emission
area) for wireless charging. The charging distance of this product is within
2mm. If the wireless charging distance exceeds 2mm, the wireless charging
cannot be carried out. Please adjust the wireless charging distance of the
mobile phone within the wireless charging range.
Unfolded the fold-out stand 
Charging Your Phone or Earbuds Using a Charging Cable :
Connect the USB charging cable to the corresponding output port of the
power bank, and the power bank will automatically turn on the output. Due to
compatibility, some smartphones need to press the button to turn on the power
output function, which is a normal phenomenon and need not be ignored. Press
the key once to supply power to the external equipment. 
Recharging Your Portable Charger
When connecting to the charging cable matching the mobile power interface, the
electric quantity number of the display will flash, which means that the
connection is normal and the power bank is charged, if there is no flash with
the number, it means that the connection fails and there is no charging.
Please check whether the charging cable is connected correctly.
Charging Your Device Wirelessly and Recharging Your Portable Charger Simultaneously
Charge the product
Use the power adapter/computer USB port to charge the local wireless charging mobile power bank. The Type-C charging cable/Lighting charging cable can be used to plug into the Type-C input port/Lighting input port of the wireless charging power bank to charge the power bank. Connect the USB connector to the charger or the USB port of the computer, and the number of the power indicator will start to flash, indicating that the product is being charged. When it is fully charged, the digital display will display”100’\
Charge mobile phones or other digital devices：
- Check whether the charging voltage of the digital product matches the output voltage of the product.
- Select the original charging cable of the digital product, one end is connected with the digital product, and the other end is connected with the output port of the product. The wired output terminal of the product automatically turn on to charge the mobile phone or other digital products, and the digital display screen will always be on.
- Charge the mobile phone with a wireless charging function, press the button once, and the digital display will light up. At this time, the wireless charging function can be used. Put the mobile phone with wireless charging function in the center of wireless charging of mobile power bank, and the mobile phone can be charged at this time, and the digital display will be always on.
Reminder:
Please read all instructions and warnings before using this product. Improper
use will damage the product or personal safety.
- The charging contact surface on the back of the mobile phone does not contain metal substances, such as iron sheets, rings, metal protective cases, etc.
- When the mobile phone is charging, if intermittent charging or serious heating is found, it is likely that the receiving coil of the mobile phone is not fully aligned with the wireless charging coil, and there are metal foreign bodies in the protective sleeve of the mobile phone. Please try to cool the mobile phone, remove the protective sleeve, and then align it in the normal position.
- This product has an over-current protection function. If the product is used improperly, it will turn off or reduce the output power, reduce the charging speed and ensure safety. Please check whether the equipment is used improperly or not
- Do not let children use alone under 12-year, especially the accessories.
- Please use a dry soft cloth to clean the surface. Do not use chemicals, soap, or detergent.
- Please don*t dismantle the machine by yourself. The user’s abnormal use or improper placement of this product may reduce the service life or damage the product. Therefore, the responsibility does not belong to the warranty responsibility or the manufacturer’s responsibility. Please understand.
- There is a conversion rate in the power bank, so the battery capacity of the power bank is not equal to the rechargeable capacity.
- Please charge your power bank regularly (at least 5 months is recommended) to maintain its long service life.
- Improper use of the product may easily result in the product itself or endanger the safety of personal and property.
- If consumers violate the product manual and improperly apply or warn, the personal and property damage caused by consumers and the company will not bear any legal responsibility.
- Non-professionals are strictly prohibited to decompose this product.
- Avoid using electrical appliances or loads that exceed the output current of the product (the circuit will be protected, no output).
- Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc. Misuse, dropping, or excessive force may cause product damage.
- Store the product in a cool, dry place. Do not store the product in a hot or humid environment. Do not dispose of the product in heat or fire.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 40°C / 32°F to 104°F.
Note: Non
Compatible with Non-Magnetic Phone Cases
Email: [email protected]
Telephone: 878-216-7177
If you have any questions, please contact our customer service by EMAIL or
SMS, we will reply to you within 24 hours.