SONOS ZP100 Sleep Tracker Multi Room Music System User Manual
- June 6, 2024
- Sonos
Table of Contents
SONOS ZP100 Sleep Tracker Multi-Room Music System
Product introduction
ZP100 is used to track your sleep data including heart rate, respiratory rate, turning over, sleep cycle etc and provides a comprehensive sleep analysis and sleep advice to help improve your sleep quality.
Device Description
Operation guide
Step 1: Download the’ Sleepace’ APP and register an account
There are two ways to download ’Sleepace’ App
- Scan The QR Code
- Search ’Sleepace’ In
- For download, you need a smartphone with Bluetooth 4.0 that supports iOS 7.0 or later or Android 4.3 or later
Step 2: Connect sleep tracker to APP.
- Make sure the controller and your smartphone are switched on and Bluetooth® is activated on your smartphone. Follow the instructions given by the app to connect the device.
Step 3: Start-Sleep monitoring
Click’ Start Sleep’ in the homepage of APP to start sleep monitoring. During short interruptions of sleep (e.g. going to the bathroom) the device keeps on recording. If longer interruptions (more than 60 minutes) occur, the pillow will stop monitoring and switch itself off. You may have to re-activate it.\
Step 4: Read the Sleep report
Click ‘ Get Up’ to stop sleep monitoring after awakening, the recorded data
will automatically be transferred to the app and the app offers a
comprehensive sleep report including heart rate, respiratory rate, sleep time
and sleep cycle; analyzes your sleep quality and offer personal sleep
guidance.
If not clicking ‘Get Up’,the pillow will stop monitoring automatically after
60 minutes of leaving bed. Connect the app with the pillow again to sync the
sleep data for sleep report.
LED Indicator
| SN | Status | Display |
|---|---|---|
| 1 | Power On（Press the Power |
button for 3 seconds）
| ****
Green LED indicator is ON for 5 seconds.
2| Power Off（Press the Power
button for 3 seconds）
| ****
Red LED indicator is ON for one second.
3| ****
Low battery
| Red LED indicator fleshes every two seconds, please charge
the device immediately.
4| ****
Charging device
| Red LED indicator stays ON.
5| ****
Charging complete
| Green LED indicator stays ON.
Technical Specifications
Pillow size
| ****
750mm*500mm
| Controller size| ****
125mm40mm12mm
---|---|---|---
Controller weight| 50g| Bluetooth
Transmission range
| ****
max. 10 meters
Communication
mode
| Bluetooth 4.1| Batterylife| ****
Up to 2 weeks
Compatibility
| ****
Bluetooth 4.1 and up, IOS7.1 or later, Android 4.3 or later.
| ****
Battery
| ****
Re-chargeablLithium-ion-battery 3.7V, 900mAH. Charging current 5.0V 1A
Precautions
Please note, this device is not a medical device and cannot be used to prevent sudden death. Please do not wholly rely on the device, users should be well taken care of. For users with existing health problem, family member should check the monitoring status now and then
Safety Notice
- Do not overbend the product. The built-in sensor may be damaged.
- Please keep the product away from high-temperature equipment, and do not use the product when using an electrical blanket.
- Do not touch the metal end of the power plug when plugging into a power socket.
- The sensor belt is nonconductive, safe to users.
- For long-term non-use of the device, please power off.
- For children and the elders, please use the product with the involvement of a guardian.
- Do not use the product during charging process
- The device must not be used close to any source of vibration (e.g. washing machines, loud music etc.) as the vibrations could affect the functions of the device.
- NOTE: DO NOT disassemble or replace battery.\
- When wash the pillow or expose it to sunlight, please take the sensor band out.
Warranty
Please contact your dealers for warranty service. For more information about the product, warranty or service, please go to www.sleepace.com.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’ s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information and Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Notice
The suitable temperature for the product and accessories is -10℃-45℃. Observe
the national local regulations in the location where the device is to be used
Hereby, Shenzhen Medica Technology Development Co., Ltd declares that the radio equipment type sleep tracker is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.sleepace.com
Shenzhen Medica Technology Development Co., Ltd 12F, Block A, Building 7, Vanke Cloud City, Xingke 1st Street, Nanshan District, Shenzhe n, China.
Importer: anixx s.r.o. Address: Kaukazska 3385101 Bratislava, Slovakia
TEL: +43 664 1674310
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>