MINISO TB13 Classic Half In-Ear Sport Wireless Earphones User Manual
- June 6, 2024
- MINISO
Table of Contents
MINISO TB13 Classic Half In-Ear Sport Wireless Earphones User Manual
Important Safety Notes
- Before using this product, read this manual carefully and keep ii properly for future reference.
- Do not use this product for a prolonged time to avoid affecting hearing.
- Do not use this product when driving.
- Do not play music at an extra large voice.
- Please use this product according to the local laws and regulons.
- Please keep It dry.
- Containing rechargeable battery, this product cannot be dismantled, altered or replaced by yourself. Do not expose it to sunlight or fire sources.
- This mark indicates the product should not be disposed of in the same way as other household wastes in EU regions. The product should be recycled to ensure sustainable reuse of resources and to prevent potential harm for the environment and human health caused by non-control of waste management. To recycle the used appliance, apply the recycling system or contact the franchiser to recycle the product according lo the environmental protection requirements.
FCC warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the uses authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant lo Part 15 of the FCC Rules. These limits ere
designed lo provide reasonable protect lion against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, ii not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will notoccurin in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged lo try lo correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Product and Accessories
- CD Volume+/Next button
- Multifunctional button / MFB button
- Volume-/Previous button
- USB charging port
- LED indicator light
- Charging cable
Specifications
BT version: v5.0
BT Pairing name: MINISO-TB13
Function: phone call, music
Input: DC5V, 1A
Battery: DC3.7V lithium battery 80 mAh
Frequency range: 20Hz-20kHz
Sensitivity: 99±3dB
Charging port: micro USB
Transmission distance: :S8m
Music time: about 6h
Charging time: about 1h
Call time: about 6h
Standby time: 5-6 days
Usage Instructions
-
Wearing Earphones
Take the earphones out of the packaging box and war them on your ears according to UR mark while hanging the wire around the back of your neck. -
Turning on
When turned off, hold the MFB for about 3s to tum it on. -
Pairing
After turned on. the earphones enter pairing mode and the LED indicator light will tum red and blue alternatively. Activate BT function on the phone and search MINISO-TB13 to click for BT connection. LED indicator light will slowly flash blue upon completion of pairing. -
Turning off
When turned on, hold the MFB for about 5s to turn it off. -
Charging
After connecting the charging cable and the compatible DC power adapter, plug the other end of the cable into the port of the earphones in order to charge them. LED indicator light will stay red during charging and will stay blue after fully charged. -
Functions/Operation of Earphones
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>