BRISTAN W BASIN12 C Round Basin Waste Slotted C Instruction Manual
- June 6, 2024
- BRISTAN
Table of Contents
BRISTAN W BASIN12 C Round Basin Waste Slotted C
Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting instructions have been created to give you all of the information you need and, if you need any further help, please do not hesitate to give us a call on 0330 026 6273.
Installation
-
Identify all components are present prior to installation.
-
Unscrew the backnut (6) and remove one of the black rubber washers (5). Fit the wate (3) above the basin with the black washer (4). Locate the bottom and fit the rubber washer (5) onto the waste body (3).
-
Secure the waste with the backnut (6).
-
Check all joints and connections for leaks.
-
In order to fill the basin, flip the waste plug (2) horizontal and make sure it is sealed. To release the water, press the waste plug down on one side.
-
plastic cover
-
waste plug
-
waste body
-
black washer
-
black washer
-
backnut
A Masco Company
Website: www.bristan.com Telephone: 0330 026 6273
Email: enquire@bristan.com