SONOS LPS-05WB Wireless Charger User Manual

: June 6, 2024
: Sonos

Table of Contents

SONOS LPS-05WB Wireless Charger
Guides
Regulatory Information
Recycling Information
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONOS LPS-05WB Wireless Charger

THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. SONOS and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. SONOS Reg. U.S. Pat. & Tm. Off. Sonos products may be protected by one or more patents. Our patent- to-product information can be found here: sonos.com/legal/patents. All other products and services mentioned may be trademarks or service marks of their respective owners. 040121 © 2004-2021 by Sonos, Inc. All rights reserved. Terms of Use, License, Warranty, and Privacy To use this Sonos product you have to accept the Sonos Terms of Use, License and Warranty Agreement, available at www.sonos.com/legal/terms-of-use. Sonos privacy statement is available at www.sonos.com/legal/privacy.

Guides

For the latest Sonos product documentation, please go to www.sonos.com/guides.

Customer Support

Visit our Web site at www.sonos.com/support. There you can browse our Knowledge Base or request assistance.
Note: If a red LED appears on the wireless charger, it indicates the presence of a foreign metal object or an internal fault. Go to https://faq.sonos.com/chargerlight to learn more.

To charge WPC, just place Sonos Roam on the smooth, magnetized side of the wireless charger..The wireless charger may charge other Qi-compliant power receiver. When When the Qi-compliant power receiver is placed on the WPC , the charge will start to work. Do not place metallic or magnetic foreign objects between the wireless charger and the power receiver, as this could cause heating of the foreign object or cause the device not to charge properly. Examples of these objects include coins, jewelry, and credit cards. The BLE radio shall not transmit any packets when no device is receiving power from the wireless charger. The BLE radio shall begin transmitting advertising packets within 1 second of a device placed on the wireless charger. The BLE radio shall stop transmitting 60 seconds +/- 1 seconds after a device is placed on the wireless charger. The BLE radio shall transmit advertising packets at a frequency of 2 Hz.

How to verifyBLE

Record advertising packets using BLE diagnostic tools starting with no device on the wireless charger, then continue recording for 90 seconds after placing a Qi receiver on the Wireless Charger

Frequency range (MHz)	H-Field Strength
WPC 112-148kHz	-10.70dBuA/m
Frequency range (MHz)	Max. Transmit Power

(dBm/mW)

BLE 2402-2480MHz| -0.08 dBm/0.00098 mW

Regulatory Information

Declaration of Conformity

Hereby, Sonos, Inc. declares that the model name: LPS-05WB-I is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at https://www.sonos.com/ support/policies.

RF Exposure Information (MPE)

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Canada

The installer of this radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. As mentioned before, the installer cannot control the antenna orientation. However, they could place the complete product in a way that causes the problem mentioned above. This class B digital apparatus complies with ISED CAN ICES-003(B), NMB-003 (B), RSS-GEN, RSS-216, and RSS-247. This device contains licence-exempt transmitter(s) /receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1).This device may not cause interference. (2).This device must accept any interference, including interference that may cause undesired operation of the device

RF Exposure Requirements

To comply with FCC and Industry Canada exposure essential requirements, a minimum separation distance of 20cm (8 inches) is required between the equipment and the body of the user or nearby persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician to help.

Recycling Information

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead please deliver it to the applicable collection point for the recycling of electrical and electronic equipment. By recycling this product correctly, you will help conserve natural resources and prevent potential negative environmental consequences. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Nom 024 information (Mexico only)

EU

Importer name/address Company: Sonos Inc.
Address: 614 Chapala Street, Santa Barbara, CA 93101
Contact name: Zibo Nelson Contact TEL no: (+1) 805 965 3001

Mexico

Ciudad de México, CDMX, Mexico
Contact name: Jesus Ledesma
Email : jesusledesma@viastara.com

SPECIFICATIONS

Equipment Brand Name Model Name
Wireless Charger LPS-05WB-I
Customer Service Center Sonos, Inc. 614 Chapala St. Santa Barbara, CA 93101 1 800-680-2345 www.sonos.com
Sonos Terms of Use, License and Warranty Agreement uso www.sonos.com/legal/ terms-of-use
Input 5V +/- 5%, 2.1 A max, 10.2 W max
Output 5 V max, 1 A max, 5 W max
Weight 75 gm
Operating Temperature 0 ºC a 40 ºC (de 32 ºF a 104 ºF)