NETGEAR LM1200 4G LTE Modem User Guide

Quick Start
LTE Modem LM1200

What’s in the box

Rear panel

*A future famwe re upgrade w i1 enabe the WAN port

Install the nano SIM card

To obtain an activated SIM card, contact your mobile broadband service provider.

1. Fnstire that power to the modem is off
2. Align the nano-SIM card with the notch toward the nano-SIM card slot and the chip side facing down.
3. Gently insert the nano-SIM card into the SIM card slot.

Power on your modem

1. Connect the USB cable to the Power port on the modem and to the provided power adapter.

2. Plug the power adapter into an indoor power outlet.
   Note; We recommend connecting the USB cable only to the power adapter that came in the package. Connecting the USB cable to a USB port on a computer might not work correctly.
   The Power LED lights solid amber and then lights solid green. The modem searches for the mobile broadband network for the nano-SIM, which might take several minutes.

3. Check the Signal Strength LED .
   • Green : The LTE connection is good.
   • Amber: The Lit connection is weak. Try a different location, such as near a window.
   • Red: The nano-SIM isn’t inserted correctly, or the modem can’t automatically connect to the LTE network (see Add and activate A custom APN profile).

Connect your modem

You can connect a router or computer to the LM1200 modem LAN port. (Your computer must have an Ethernet port.) The WAN port is reserved for use in a WAN failover connection.
To connect a router:

1. Connect an Ethernet cable to the LAN port on the LM1200 modem.
2. Connect the other end of the Ethernet cable to the WAN or Internet port on the router.
3. For broadband Internet access, connect your computer or mobile device to the router.

To connect a computer:
Connect an Ethernet cable to the LAN port on the LM1200 modem and an Ethernet port on the computer.

Manage your modem

You can log in to your modem to view and change its settings from a computer that is connected to the modem with an Ethernet cable. Your computer must have an Ethernet port.
To access your modem settings:

1. Connect an Ethernet cable to the LAN port on the modem and the Ethernet port on the computer.
2. Launch a web browser from the computer.
3. In the address field of the web browser, enter http://192.168.5.1.
4. In the Sign In the field, enter the default password, and click the Sign in button.
   See the modem label for the default password.

Note: While the password that you enter is unique to your modem and is secure, we recommend that you change it to a password that you want to use.

Add and activate a custom APN profile

If the modem does not automatically connect to your broadband network, contact your mobile service provider for the APN profile that they require. Then log in to the modem and enter the custom APN profile settings.

1. Launch a web browser from a computer or mobile device that is connected to the modem.

2. In the address field of the web browser, enter http://192.168.5.1.
   The limited Dashboard page displays.

3. In the Sign In the field, enter the password, and click the Sign In button. See the modem label for the default password.

4. Select Settings > Network > APN.
   The APN page displays.

5. Click the Add button.
   The New APN section opens on the page.

6. Enter the settings for the new APN profile.
   Use the information that your mobile service provider gave you. If your mobile service provider did not specify some settings, leave the default settings.

7. Click the Save button.
   The new APN profile displays on the page, but is not yet the active profile.

8. Select the radio button next to the APN profile that you just added.
   The modem now uses the selected APN profile to establish a connection with the mobile broadband network of the mobile service provider.
   If you still cannot get an Internet connection, contact your mobile service provider to verify the information for the APN profile,

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com

• Solid green: The modem is powered on.
• Blinking amber: Device error.
Ethernet LAN | • Solid amber: A device is connecting to this port.
• Green: A device is connected to this port.
Ethernet WAN | A future firmware update will enable this port. For information about the Ethernet WAN port and WAN failover, see the user manual, which you can download from netgear.com/support.
Signal Strength | • Green: The LTE connection is good. Blinking indicates data traffic.
• Amber: The LTE connection is weak. Blinking indicates data traffic.
• Red: The modem can’t connect to the LTE network.

Regulatory and Legal

For regulatory compliance information including the EV Declaration of Conformity, visit https://www.netgar.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgar.com/about/privacy- policy
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgar.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
©NETGEAR. Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134. USA
NETGEAR INTERNATIONAL LTD
Floor 1. Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
November 2020 201-27442-02

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>