freenod FNA3 Bluetooth Earbuds User Guide
- June 6, 2024
- freenod
Table of Contents
freenod FNA3 Bluetooth Earbuds
UNBOXING
For first time use after unboxing, charge the case and earbuds using the USB cable for at least 15 minutes. Do not take the earbuds out during this time.
CONNECT TO DEVICE
Open case, the freenod earbuds will auto-connect to the last paired device. To
connect with new devices, with both earbuds in case, press button for 3
seconds until white light blinks. To reset the earbuds, press button for 10
seconds until red light blinks 
Turn on Bluetooth of the device, tap •treenod” from the list to connect.
INSERT / START LISTENNING
Piece In ears end adjust to get a comfortable flt. You will hear the tone indicating freenod is ready to play.
TAP OPERATION
While wearing, double-tap the stem of either earbud to play/pause or answer/hang up a call, triple-tap to activate the voice assistant on your device.
CHECK CHARGE STATUS
Light shows charge status of the earbuds when they’re In the case. Otherwise, light shows charge status of the case
CHARGE
The freenod earbuds charge while In the case. Light will blink red when the case battery is low. Plug in the USB cable to charge.
SAFETY AND HANDLING
-
Handle freenod earbuds and case with care. They contain sensitive electronic components, including batteries, and can be damaged, impair functionality, or cause Injury If dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use damaged freenod earbuds or case. Wipe off sweat from the earbuds and the charging case before charging. Remove headphones immediately if you experience a warming sensation. Don’t attempt to alter this product or replace the batteries yourself.
-
The headset can produce high-volume and high-pitched sound. Exposure to such sounds may cause permanent hearing loss. The volume level may vary depending on the conditions of the mobile phone you are using, Its reception status and volume settings, and the environment.
-
Do not use the earbuds at high volume for an extended period. To avoid hearing loss, use headphones at a comfortable and moderate volume. Turn down the volume of your device first before putting on the earbuds, and then gradually increase the volume to a comfortable level.
-
If you use the headset to make a call while driving, you should use It with caution and follow the applicable laws regarding the use of mobile phones and headsets. Some local regulations have specific restrictions on the use of such products while driving, such as the configuration of a single earpiece. Do not use the headset for other purposes while driving.
-
If you use headphones when doing activities that require concentration, you should pay attention to the safety of yourself and others, such as when riding a bicycle or walking on or near roads, construction sites, or railways. You should remove the headphones or adjust the volume to ensure that you can hear the surrounding sounds, including alarm and warning signals
-
Freenod earbuds and case contain components and radios that emit electromagnetic fields. Freenod earbuds and case also contain magnets. These electromagnetic fields and magnets may Interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and the earbuds and case. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using the earbuds and case if you suspect they are Interfering with your pacemaker, defibrillator, or any other medical device.
-
Avoid prolonged skin contact with a device, its power adapter, the charging cable and connector, or a wireless charger when plugged Into a power source, because it may cause discomfort or injury. For example, while the
case Is charging using the charging cable and a power adapter or a wireless charger plugged into a power source, don’t sit or sleep on the case, charging cable, connector, power adapter, or wireless charger, or place them under a blanket, pillow, or your body. Take special care If you have a physical condition that affects your ability to detect heat against your body. -
Freenod earbuds and the case may present a choking hazard or cause other Injuries to small children and pets. Keep them away from small children and pets. The earbuds and the case contain lithium-ion batteries and may be hazardous If swallowed. If Ingested, seek Immediate medical attention.
-
For support and troubleshooting information, user discussion boards, and the latest nod.studio news, go to www.nod.studio
REGULATORY COMPLIANCE
FCC COMPLIANCE STATEMENT
Note: This equipment has been tested and found to comply with the llmlts for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful Interference In
a resldentlal Installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
Instructions, may cause harmful Interference to radio communications. However,
there is no guarantee that interference will not occur In a particular
Installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user Is encouraged to try to correct the interference by one or more
of the following measures Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect the equipment Into
an outlet on a circuit different from that to which the receiver is
connected.Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- this device may not cause harmful Interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
ISED CANADA COMPLIANCE
This device contains licence-exempt transmitter(s}/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- his device may not cause Interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>