tesunho DTP9751 IP Walkie-Talkie User Manual

: June 6, 2024
: tEsunho

Table of Contents

tesunho DTP9751 IP Walkie-Talkie
Checking Equipment
Getting Acquainted
Basic Operation
Menu Introduction
AFTERSALES SERVICE
General Safety Information
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tesunho DTP9751 IP Walkie-Talkie

Checking Equipment

Carefully unpack the radio. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately.

ACCESSORIES

ITEM	QUANTITY
ANTENNA	1
CHARGER	1
ADAPTOR	1
Li-Ion BATTERY	1
BELT CLIP	1
USER’S MANUAL	1

Getting Acquainted

Antenna
Speaker
Microphone
Lamp
Indicator Light
Power and Volume Control
LCD screen
Keypad
Orange Key Short press—Turn on the Lamp Long press—SOS
PTT
Side Key 1
Side Key 2
Programming/Earphone jack
Micro USB charger jack
SIM Card Slot

Basic Operation

Power on

Insert the SIM card
Pack the battery
Turn the volume control clockwise to power on.

Power off
Turn the volume control anticlockwise to power off.

Caution：
Can not remove battery directly to power off, otherwise, it will lead to the data loss and the walkie-talkie damages .

Transmitting
Press the PTT button to transmit, keep away from the microphone 5cm at least. Exception & Talking Priority: If there is an advanced user starts to talk when you are transmitting, you will be forced to exit the transmitting mode.

Receiving
The LED indicator lights blue, LCD screen displays the transmitter’s name when it is receiving.

Press MENU Key to enter menu
Press “▲” or “▼” Key to select items
Press BACK Key to back to the previous menu
- - Press OK Key to confirm selecting
    | Step 1| Step 2| Setting Options
    ---|---|---|---

Menu

Settings

| Network Mode| Auto/ 3G Prefer /3G only/

4G only

AFTERSALES SERVICE

Warranty Period
Main Unit: Battery, Charger and Adapter: half a year from the data the radio is sold.(It’s invalid without the seal of seller.)

Free Maintenance
The seller provides free maintenance for the nature breakups in the warranty period.

Paid Maintenance
Under the following conditions, the seller will charge the maintenance fee:

When the maintenance is beyond the warranty period, the seller will charge reasonable maintenance free.
The breakups are caused by nature disasters.
The breakups are cause by customers. (Or their deliberate intentions.)
The breakups are caused by mishandling or operation unpermitted.
The breakups are caused by using nonstandard battery packs.

General Safety Information

Failure to follow these guidelines may cause harm to your device, property, yourself, or others.

Do not switch on the device where prohibited or when it may cause interference or danger.
Do not use device at gas stations, service stations, or near fuel or chemicals.
Please do not store or carry your mobile phone or accessories near liquid or flammable gas.
Do not place the battery, phone or charger in a microwave oven or other high voltage equipment. Otherwise, it may cause circuit damage, fires, or other damage.
All wireless devices, including mobile phones, might be susceptible to interference , and it can also cause interference. Please check all laws and regulations when using your mobile phone, especially in airplanes, hospitals or medical institutions.
Only use branded accessories and batteries that are approved by A Beep, LLC. Accessories which are not approved by A Beep, LLC may damage the phone or violate local regulations for radio devices. A Beep, LLC will not take any responsibility for accidents or problems caused by using accessories that are not approved by A Beep, LLC.
The device is designed for water resistance under certain conditions, but A Beep, LLC does not recommend excessive submersion. Liquid damage will void the warranty.
When connecting with other devices, please follow the safety guidelines presented in this manual. Do not attempt to connect your device with incompatible products.
Please do not use the phone if antenna is damaged. Otherwise, it could cause injury.
Please keep metallic objects away from phone receiver. Small metallic objects may be attracted to the device and personal injury or device damage could occur.
Keep a minimum distance of 15 cm between a wireless device and an electronic implant(pacemaker, insulin pumps, neurostimulators, etc).
Keep the device away from the belly of pregnant women.
Keep the device away from the lower abdomen of adolescents.
Children and adolescents should make reasonable use of the phone. Avoid night communications and limit the frequency and duration of calls.
Only connect to power sources with USB 2.0 or above.

Battery Safety

Please do not attempt to repair, disassemble or modify the battery. Replacing battery by an incorrect type could lead to explosion. Your phone can only use A Beep, LLC authorized batteries. Using third-party products may cause battery leakage, overheating or fires.
Do not place or use battery near fires, heaters, direct sunlight, or other heat sources. Prolonged exposure to heat may cause battery leakage, explosions, or fires.
Please do not place pressure on or pierce the battery with hard objects. Damaging the battery could cause battery leakage, overheating, or fires.
If you experience any battery abnormalities, such as high temperature, discoloration, distortion, or leakage, immediately discontinue usage of the device and contact customer support.
All batteries have a limited lifespan and will begin to lose capacity after several hundred charges/discharges.
Do not dispose of the battery as household waste. Refer to local regulations.

Charging Safety

The charger is intended for indoor use only.
Do not charge the battery under the following conditions: in direct sunlight, in temperatures below 5°C; in areas with humidity, dust or strong vibrations; in areas near a TV, radio or other electrical appliances.
The charger shall be installed near the equipment and shall be easily accessible.
The maximum ambient charging temperature of the equipment declared by manufacturer is 35°C.
Sockets that are dirty may cause poor contact with the charger and your phone may fail to charge propaerly.
Please only use the official A Beep, LLC charger. Using unauthorized chargers can be dangerous and can void your warranty.
Make sure to only use outlets with the correct voltages(as label led on the charging brick). Using an incorrect voltage can damage your phone and/or battery and lead to injury.
Do not use unsafe plugs or outlets.
Do not use a short-circuit charger.
Do not connect your device to a high-voltage power supply or the battery could become damaged.
Do not disassemble or modify charger, as this may lead to personal injury, electric shock or fire.
Do not touch the charger, cable or power socket with wet hands, as this may cause electric shock.
Do not place heavy objects on the power cord or attempt to modify any cables.
Make sure to grasp the charger firmly while unplugging it.
Do not pull the power cord as this may lead to damage and cause electric shock or fire.
Before cleaning the device, unplug the power plug from the socket.
Unplug the charger from electrical outlets and the device when not in use.

Health Information

To prevent possible hearing damage, do not listen at high volume levels for long periods.
Damage to the display or battery could lead to leakage of the liquid. If this liquid comes in contact with your eyes, skin or clothes, immediately rinse your eyes (do not rub) or wash skin with water thoroughly and seek medical attention.
Some people may get dizzy or experience medical problems in response to flashing lights. If you are at risk, please consult your doctor before using this device. If you have the following symptoms: headache, dizziness, convulsion, eyes or muscle cramps, loss of consciousness, or involuntary body movements, please stop using the device immediately and seek medical attention. Avoid using the device for extended periods and keep proper distance from your eyes.

RF Exposure Information (SAR )

This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6W/kg.
While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
This device has also been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the handset a minimum of 25mm from the head.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
To ensure the SAR compliance, please keep the distance of 2.5 centimeters or more when the equipment close to the head and use the back clip when wearing.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference; and
This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful to part interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.