TOPDON Volcano2000PRO+ Portable Lithium-ion Jump Starter for 12V Cars & Trucks User Guide

TOPDON Volcano2000PRO+ Portable Lithium-ion Jump Starter for 12V Cars & Trucks

Welcome

Thank you for purchasing TOPDON Jump Starter Volcano2000Pro+. Please patiently read and understand this User Manual before operating this product. If any issues arise from the operation of this product, welcome to contact support@topdon.com for official technical support.

About

TOPDON Volcano2000Pro+ serves as a portable Jump Starter for cars, boats, motorcycles, ATVs, lawn mowers, caravans, tractors, trucks, etc., with 25-times boost capability on a single charge, and multiple protections against short circuits, overloads, and overcharging etc., for optimal user experience.

The Jump Starter can also be used in a variety of real-life applications for night illumination, outdoor activities, motoring life, and natural disaster emergency etc. with the added features as wireless charging, Type-C output, to be the intimate guardian in your journey.

The Smart Clamp CP020 can be used as wireless bluetooth battery and system tester, provide key information about battery health quickly, easily and accurately.

Features

etc.;
Press to check its remaining battery capacity; Hold to turn on/off the flashlight.
2| LCD Display| Display the remaining power and output status.
3| Auto Jump Starting Port| 12V, 2000A.
4| Output 5V/2.1A| Charge mobile devices and cameras etc, 50% faster than a standard charger.
5| Output QC3.0| Charge mobile devices and cameras etc, 75% faster than a standard charger.
6| Flashlight| Serve as Steady Light, or SOS, or Strobe.
7| Type-C Input & Output| Output port to charge mobile devices, tablet and cameras. Input port to charge this product.
8| DC Output| Power DC-powered devices as air-compressor, GPS, Vehicle Fridge, Vehicle Vacuum Cleaner, and Vehicle Air Purifier, etc.
9| Wireless Charging| Charge the Qi-certified cellphones.
10| Smart Clamp Plug| Insert the plug fully into the jump starter.
11| Digital Display| Display jump starter battery voltage/abnormal condition, vehicle battery data, and alternator output voltage after jump start.
12| Switch Mode Button| Press once to switch between jump start mode and battery test mode.
13| LED Indicator| 6 LED indicators showing jump starter , vehicle battery and bluetooth connection status
14| Red Smart Clamp| Connect to the positive terminal of the car battery.
15| Black Smart Clamp| Connect to the negative terminal of the car battery.

Package Contents

1. Lithium Jump Starter
2. Smart Battery Clamp CP020
3. Type-C Cable
4. DC to Cigarette Lighter Converter
5. User Manual
6. Carrying Bag

Compatibility

The product is only compatible with the 12-volt lead-acid batteries, including 12V cars, trucks, pickups, motorcycles, boats, mowers, ATVs, tractors, caravans, etc. Do not use this product with any other type of batteries.

Specifications

How To Use

Jump Start Your Vehicle Battery.

1. Connect the smart battery clamp CP020 to the jump starter, default mode is jump start mode, the [OK] LED will illuminate indicating ready to use, and [Fault] indicating jump starter battery level too low, needs to be charged;
2. Connect the red clamp to the positive terminal (POS, P, +) of the battery; and connect the black clamp to the negative terminal (NEG, N,-) of the battery;
3. Start the vehicle;
4. When your vehicle is started, disconnect the clamps from the vehicle battery.

Test your vehicle battery on App

1. Press switch mode button on battery clamp CP020 to switch to battery test mode, blue LED flashes, indicates CP020 in bluethooth pairing phase. Connect phone with CP020 following the instruction on BT Mobile App. When connection established, blue LED is solid.
2. Conduct battery tests following the instructions on App.

Attention

please charge the jump starter; or when vehicle battery is under 8V;
OV; showing — — —| Current back flow, V2000 Pro+ battery level too low, please charge the jump starter;
CB; showing — — —| Current back flow, V2000 Pro+ battery level too low, please charge the jump starter;
OT; showing — — —| Over temperature, turn off V2000 Pro+ wait for it cool- ing down;
SC; showing — — —| Short circuit, clear battery posts and clamps, check the connection in between;
No Icon; showing — — —| Exceed Connection time/overload, clear battery posts and clamps, check the connection in between.
LED In- dicator| | Connection State| Battery State| Jump Starter State
---|---|---|---|---
Connect| Full| Middle| Low| OK| Fault
Blue| Green| Orange| Red| Green| Red
Expla- nation| Bluetooth Pairing| ●| | | | |
Bluetooth Connected| ✓| | | | |
V2000 battery| 0-14V| | | | | | ✓

14V| | | | | ✓|
Vehicle Battery| 0-4.2V| | | | ●| |
4.2-11.5V| | | | | ✓|
11.6-12V| | | ●| ✓| |
12.1-13V| | ●| ✓| | |
13V| | ✓| | | |

Note: ✓ means solid, ● means flashing

Charging the external electronic devices:

1. Press the “Power” button;

2. Use the USB cable to charge mobile devices as cellphones, tablets etc.;
   Use the 12V DC output to power appliances as air-compressors, vehicle refrigerators;

3. Disconnect when the charging is completed.

Use the LED Light as Flashlight or SOS, strobe:

1. Hold the “Power” button for 3 seconds to turn on LED Light;
2. Press the “Power” button to cycle the LED modes, from Steady Light, to “SOS”, and to Strobe.

Battery Charging

Charge this product via the USB type-C input from the wall socket or other 5V-8V output devices.
When this product is being charged, its LCD will display “Charging” message. When it’s fully charged, the LCD will display a “100%” message.
**** Please charge this product for at least 8 hours before the first use.

5V USB Charger Rating

| 1A| 2A| 3A
Time| 12hr| 6hr| 4hr

Important

The battery jump procedure is only for use on vehicles with 12 volt batteries.
Use only the smart battery clamps supplied with this product.
Only jump start the vehicle when capacity is at least 50%.
Better not get the two battery clamps contacted together
If the engine does not start, disconnect this product from the vehicle battery, and wait for at least 20 seconds before reconnecting. Maximum three attempts are allowed in 2 minutes
Once the vehicle engine is successfully started, disconnect the clamps within 30 seconds.
DO NOT use this product if any cable, clamp or cord is damaged.
DO NOT put the product under the direct sunlight or hot areas.
DO NOT disassemble the equipment.
DO NOT use chemicals or detergents to clean the product.
DO NOT place the products in high temperature environment for a long time.
Check the charge level of the device every four months, and charge the device if needed.

Troubleshooting Guide

Q: How to turn off this product?
A: This product will automatically power off while not being used.

Q: How long time does it need to get fully charged?
A: Via the Type-C USB input, the device will need approximately four to five hours to get fully charged.

Q: How many times can this product jump start a vehicle battery on a single charge?
A: About 25 times.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Warranty

**** TOPDON One Years Limited Warranty
The TOPDON Company warrants to its original purchaser that TOPDON products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period). For the defects reported during the Warranty Period, TOPDON will, according to its technical support analysis and confirmation, either repair or replace the defective part or product.

**** This limited warranty is void under the following conditions:
Misused, disassembled, altered or repaired by a non-TOPDON technical repair specialist. Careless handling and violation of operation

Notice: All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice.

References

• TOPDON|Automotive Diagnostic Tools, Battery Tools and Key Programmers – TOPDON TECHNOLOGY Co., Ltd.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>