BRESSER BR-7RGB Mini Tube Instruction Manual
- June 4, 2024
- BRESSER
Table of Contents
BRESSER BR-7RGB Mini Tube Instruction Manual
Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.
Packing List
Fig. 1
GENERAL WARNINGS
DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach of children and animals.
Never touch parts of the device during operation or before it has cooled down completely (approx. 45 min. after switching off)!
RISK OF GLARE!
Make sure that people and animals do not look into the light. The high luminosity can cause glare to the eyes and afterimages. This impairment of vision can lead to accidents.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
The manufacturer accepts no liability for damage to property caused by
improper or insufficiently safe installation!
Only use the recommended power supply unit or the recommended rechargeable
batteries4 for the power supply!
The manufacturer accepts no liability for voltage damage caused by the use of
an unsuitable power adapter!
To prevent decreasing the strength of the magnets, do not attach this device
or the magnets to any surface hotter than 80C°.
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power source
(power adapter). Only use the device as described in the manual. Otherwise,
you run the DANGER of an ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables, extensions or
connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with damaged electrical
parts! Damaged parts must be replaced immediately by an authorized service
agent.
Operate the device only in a completely dry environment and do not touch the
device with wet or damp body parts.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and ensure that it is stored in a reasonably safe place.
- Keep children and animals away from the device! They could knock the device over.
- Make sure that no one can trip over connection cables. The device could be knocked over.
- Do not expose the device to high temperatures. Do not short circuit the device or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
- Never cover the ventilation slots or cooling fins of the device during operation or until it has cooled down completely!
- Only use the recommended power supply unit or batteries4!
IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please contact your
dealer. They will contact the Service Center and can arrange the return of
this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the appliance is
not in use, in case of a longer interruption of operation and before any
maintenance and cleaning work.
Place your device so that it can be disconnected from the power supply at any
time. The power outlet should always be near your appliance and should be
easily accessible, as the plug of the power cord serves as a disconnect device
from the mains supply.
To disconnect the unit from the mains, always pull the mains plug and never
pull the cable!
Do not subject the device to excessive vibrations.
PARTS LIST & DELIVERY CONTENT
DELIVERY CONTENT
A Mini light tube (1x), B Carrying bag (1x), C Mini tripod (1x),
D USB cable (type A/C) (1x), E Wrist strap with ¼” thread (1x),
F Metal mount plates (2x), G User Manual
PARTS LIST
- ¼” screw hole
- Magnet
- Display screen
- Up Button
- Down Button
- Power Button
- Mode Button
- Type-C charge port
- LED Panel
CHARGING
To charge the device, please use the USB cable (D) and plug it into the Type-C charge port (3). Then plug the other end of the cable wiith the USB-A plug into a 5V power adapter (not included) to connect it with a power socket.
POWER SUPPLY
Note:
This device is powered by the built-in rechargeable battery. Before commissioning, make sure that it is fully loaded. Only use the main cable (D) supplied for charging! Press Power/Function button (6) to power on the device.
INSTRUCTIONS
-
Power off/Mode Switch
Long press to turn on the light
Short press to switch light mode
(CCT Mode, RGB Mode, HSI Mode, Effect Mode)
-
**Display Zone
** Press the buttons to adjust the Colour Temperature Range: 2500-9000K.
Press the buttons to adjust the brightness Range: 0-100%.
Press the buttons to adjust the HUE RGB Range: 0-360°.
Press the buttons to adjust the brightness Range: 0-100%.
Press the buttons to shift effects (20 effects).
Press the buttons to adjust the brightness Range: 0-100%.
- **Effect Modes
**
PRODUCT SPECIFICATION
Note:
The data of the light is on the base of average.
Slight difference shall exist among different lights.
DISPOSAL
Dispose of the packaging materials by type. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage!
According to the European Directive 2002/96/EU on Waste Electrical and
Electronic Equipment and its transposition into national law, used electrical
equipment must be collected separately and recycled in an environmentally
sound manner.
Observe the current legal regulations when disposing of the device! Information on proper disposal can be obtained from municipal waste disposal service providers or the Environmental Agency.
CLEANING
Before cleaning the device, disconnect it from the power supply (remove plug
or remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid damaging
the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. Store it in the supplied bag or
transportation packaging. The batteries should be removed from the unit if it
has not been used for a long time.
EC DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. This can be viewed at any time upon request at www.bresser.de/download/F004613/CE/F004613_CE.pdf
UKCA DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. This can be viewed at any time upon request at www.bresser.de/download/F004613/UKCA/F004613_UKCA.pdf
WARRANTY
The regular warranty period is 2 years and begins on the day of purchase. You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.
Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.
e-mail:service@bresseruk.com
Telephone*: +44 1342 837 098
BRESSER UK Ltd
Customer Support
Suite G3, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
United Kingdom
*Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.
Contact
BRESSER Benelux B.V.
Smirnoffstraat 8
7903 AX Hoogeveen · Nederland
@BresserEurope
Errors and technical changes reserved.
Manual_F004613_BR-7RGB-Mini-Tube_en-de-nl_BRESSER_v042022a
References
- Bresser | Startseite | Expand Your Horizon mit BRESSER
- Bresser | BRESSER BR-7 RGB Mini Tube | Expand Your Horizon
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>