testo 0564 5572 Refrigeration Analyzer Set User Guide

June 6, 2024
testo

testo 0564 5572 Refrigeration Analyzer Se logo

testo 0564 5572 Refrigeration Analyzer Set

testo 0564 5572 Refrigeration Analyzer Se pro

INSTALLATION INSTRUCTIONS

testo 0564 5572 Refrigeration Analyzer Se 1

Approval and Certification

Product

| testo 557s
---|---
|
Date

| 02.12.2020

The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import etc. in particular in count- ries without wireless permits, is his responsibility.

Country Comments
Australia
Canada IC: 6127B-05645570

See IC Warnings

Europa + EFTA|

The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific down- loads.

EU countries:

Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE), Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Sweden (SE), Slovakia (SK), Slovenia (SI), Spain (ES), Czech Republic (CZ), Hungary (HU), United Kingdom (GB), Republic of Cyprus (CY).

EFTA countries:

Iceland, Liechtenstein, Norway, Switzerland

WEEE Reg. no.: DE 75334352

Hongkong| Authorized
Turkey| Authorized
USA|

FCC ID: WAF-05645570

See FCC Warnings

Japan|

See Japan Information

Bluetooth®- Information

| Feature

| Values

---|---|---
Bluetooth®- Range/| typical 150 m

(free field/

radio type

| Bluetooth® Low Energy (BLE) 5.0
company

| Lierda LSD4BT- S98BMRSP01
RF Band

| 2402 – 2480MHz
power output

| 19.31dBm
Antenna gain

| PIFA Antenna 2.43dBi

Bluetooth®- SIG Listing

| Feature

| Values

---|---|---
Declaration ID| D051404
member com- pany| Testo SE & Co. KGaA

IC Warnings

CAN ICES-003(B)/NMB-003(B): This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. RSS-Gen & RSS-247 statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

Caution
Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure li-mits set forth for an uncontrolled environment and meets the IC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person´s body in normal use position to ensure compliance with RF exposure requirement.

FCC warning statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ge-nerates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit diffe-
  • Consult the dealer or an experienced radio/TV techni-cian for help.

Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Shielded interface cable must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired opera-tion.

Caution: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure li-mits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person´s body in normal use position to ensure compliance with RF ex- posure requirement.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals