testo 0564 5500 Digital Manifold with Bluetooth and 2-Way Valve Instruction Manual

June 6, 2024
testo

testo 0564 5500 Digital Manifold with Bluetooth and 2-Way Valve
testo 550s
Model No:0564 5500

FCC ID:WAF-05645500
IC:6127B-05645500

How To Use

App Download

www.testo.com/de-DE/services/download-center

Safety Precautions

Configuration

Specifications

Approval and Certification

Product testo 550s
Mat.-No. 0564 5500
Date 13.10.2020

The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import etc. in particular in countries without wireless permits, is his responsibility.

Country Comments
Australia
Canada IC: 6127B-05645500 See IC Warnings
Europa + EFTA

The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads.

EU countries: Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE), Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Sweden (SE), Slovakia (SK), Slovenia (SI), Spain (ES), Czech Republic (CZ), Hungary (HU), United Kingdom (GB), Republic of Cyprus (CY).

EFTA countries: Iceland, Liechtenstein, Norway, Switzerland

WEEE Reg. no.: DE 75334352

Hongkong| Authorized
Turkey| Authorized
USA|
FCC ID: WAF-05645500 See FCC Warnings
Japan| R 201-200722
See Japan Information
Bluetooth®- Information| Feature| Values
---|---|---
Bluetooth®- Range| typical 100 m (free field)
radio type| Bluetooth® Low Energy (BLE) 5.0
company| Lierda LSD4BTS98BMRSP01
RF Band| 2402 – 2480MHz
power output|
Antenna gain| PIFA Antenna
Bluetooth®- SIG Listing| Feature| Values
---|---|---
Declaration ID| D051404
member company| Testo SE & Co. KGaA

IC Warnings

CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003.

RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Caution: Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets the IC radio frequency (RF) Exposure Guidelines.

Co-Location:
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC Warnings
Information from the FCC (Federal Communications Commission) For your own safety Shielded cables should be used for a composite interface. This is to ensure continued protection against radio frequency interference.

FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. Shielded interface cable must be used in order to comply with the emission limits.

Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.

Co-Location:
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals