testo 05641550 Digital Gauge with Wireless Vacuum Instructions
- June 6, 2024
- testo
Table of Contents
testo 05641550 Digital Gauge with Wireless Vacuum
Overview
INSTALLATION
Free download testo Smart-App
Instructions
Approval and Certification
Product
| testo 550i
---|---
Mat.-No.
| 0564 1550
Date
| 02.12.2020
The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledge that the re-sale, export, import, etc. in particular in countries without wireless permits, is his responsibility.
| Country | Comments |
|---|---|
| Australia | |
| Canada | IC: 6127B-05641550 |
IC Warnings
Europa + EFTA|
The EU Declaration of Conformity can be found on the testo homepage www. testo.com under the product specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Den- mark (DK), Germany (DE), Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxem- bourg (LU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Por- tugal (PT), Romania (RO), Sweden (SE), Slovakia (SK), Slovenia (SI), Spain (ES), Czech Republic (CZ), Hungary (HU), United Kingdom (GB), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
WEEE Reg. no.: DE 75334352
Hongkong|
Authorized
Turkey| Authorized
Japan|
See Japan Information
USA|
FCC ID: WAF-05641550
See FCC Warnings
Bluetooth®- Information
| Feature| Values
---|---|---
Bluetooth®- Rang| typical 150 m
(free field/
radio type| Bluetooth® Low Energy (BLE) 5.0
company
| Lierda LSD4BT- S98BMRSP01
RF Band| 2402 – 2480MHz
power output
| 18.95dBm
Antenna gain
| PIFA Antenna 2.43dBi
Bluetooth®- SIG Listing
| Feature
| Values
---|---|---
Declaration ID| D051404
member com- pany| Testo SE & Co. KGaA
IC Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Caution:
Radio Frequency Radiation Exposure This equipment complies with IC radiation
exposure limits set forth for an uncontrolled environment and meets the IC
radio frequency (RF) Exposure Guidelines. This equipment should be installed
and operated keeping the radiator at least 20 cm or more away from the
person´s body in normal use position to ensure compliance with RF exposure
requirements.
Co-Location:
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
FCC Warnings
Information from the FCC (Federal Communications Commission) For your own safety Shielded cables should be used for a composite interface. This is to ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment. A
shielded interface cable must be used in order to comply with the emission
limits.
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution:
Radio Frequency Radiation Exposure This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines. This equipment should be installed
and operated keeping the radiator at least 20 cm or more away from the
person´s body in normal use position to ensure compliance with RF exposure
requirements.
Co-Location:
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
References
- Testo, Inc | Leading innovator in state-of-the-art measuring technology
- Testo international | Professional measuring instruments and systems by the world market leader | Testo SE & Co. KGaA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>