Shanghai Wanway Digital Technology S20 GPS Tracker User Manual

Wantaway Digital Technology S20 GPS Tracker
User Manual

To ensure quick and correct usage, please read the instruction manual carefully before using it.

Product introduction

Specification

Device Dimension

Accessories

Overview

Find the notch and open the device casing

Open the SIM Card shell, insert the SIM Card in the right direction as follows:
Attention: Make sure the device is shut down already, then insert SIM Card

LED Indicator

|
---|---

Power on and Power off
Power on Long press the switch for more than 3 seconds, the main LED indicator quick flashing, which means working normally, then the LED indicator is extinguished, which means the device enters sleep working mode.
Charging
Open the device silicone plug, connect to external power, red LED indicator long light means device charging, power LED slow flashing means device full charged.

Installation

1. Check Device
   Check device shell and its accessories before installation

2. Install the device
   A. Waterproof: Please choose somewhere is waterproof.
   Be careful to let the device stay away from the air conditioning outlet to prevent condensate water from accumulating, which can avoid damaging the service life of the product. B.Shakeproof: Do not install the device in a position with a large vibration amplitude.
   C. Tamper-proof: GPS devices should be away from electronic equipment to prevent signal interference.
   

3. Installation Precautions
   Device magnetic cannot touch somewhere high temperature, for example, car exhaust pipe otherwise will make magnetic useless.
   Please do the payment for the SIM Card per month or per year continuously, the device cannot be used if overdue.
   Device should be tested after the first installation.
   The strong magnetic on the back of the device cannot touch the hard disk digital products, which will cause damage to the hard disk. If any questions, please contact us for help.

LED Indicator

LED Indicator

|

LED Indicator Status

---|---
Power LED indicator (Red)| Long Light: External power supply is charging
Slowly blinking: Power supply or battery full charged
Quickly blinking: Low backup battery
No light: LED Indicator is broken or in sleeping mode
GSM LED Indicator (Yellow)| Quickly blinking: GSM initialization
Slowly blinking: GSM received a normal signal
No Light: Sleeping mode or no GSM internet
Location LED indicator (Blue)| Quickly blinking: Searching signal
Slowly blinking: Signal normal
No light: GPS in sleep mode or abnormal working

Device features list

Main features

|

Description

---|---
SOS set or delete| 3 SOS numbers can be set or deleted
Over-speed alarm| You will receive an alarm if over-speed
Voice monitoring| The SOS number dials the phone number on the device and immediately enters the monitoring state. (note: this function can only be supported by a voice card)
Geo-fence| You will receive an alarm if GPS drives out somewhere limited
Shock alarm| You will receive a shock alarm when the car is shocked after turning on its defensive state.
Low battery alarm| You will receive a low battery alarm once turn on the low battery notification
Intelligent
power-saving mode| Unit set in seconds, default is 10 seconds to locate, which is the most accurate model, G-SENSOR control GPS working at the end, working 4 minutes each time.
Time interval
working mode| The unit of time is minutes, and a range of 5-1440 minutes can be set for reporting
GPS/BDS| When no GPS or BDS signal is found, the base station is automatically started for positioning
Cut-wire alarm| Light detection oil dark to light to achieve the alarm dismantling
Free installation| Strong magnetic, free of installation

Access to platform

• Platform(wanwaygps.com) •Android and IOS APP Trackway

There are two methods to login into the platform or app.

1. Log in by IMEI number(the 15 digits on the back of the device), password: the last 6 digits of the IMEI number.
2. Contact the supplier to create an account for you.

Precautions

• Device warranty not including the damage of human factor.
• Do not put the device or its built-in battery in water or fire, do not bend or open the battery.
• Do not disassemble the device, which may cause damage to the device due to unprofessional handing.

Solutions to common problems

Please contact sales when you cannot handle problems.

Common
problem| Fault description| Solutions
---|---|---
Poor signal| Some poor signal areas like basements and tunnels are not able to acquire GPS signals.| Move device to open sky areas.
Device cannot acquire GPS signal if placed face down or above with metal material layer shielding| Please put it in the correct direction or change the installation position
Unable to
boot| The backup battery used up| Fully charged before using
Cannot connect internet| SIM Card no data service| Please contact the SIM Card operator to check the data service

Warranty policy

Special statement
This product is subject to any technical change without prior notice. Product appearance and color are subject to the real product.

Replacement policy
We can replace a new one for you if the device is not damaged by the human factor.

Warranty Card

Customers Data

Customers Name| | Telephone|
---|---|---|---
Address|
Model Type| | IMEI number|
Purchase Data| | Invoice No|
Company Address|

Please reserve the warranty card carefully

FCC Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>