testo 552i Smart Vacuum Prob User Guide
- June 6, 2024
- testo
Table of Contents
FCC ID:WAF-05641552
IC:6127B-05641552
testo 552i
testo 552i
0564 1552
testo 552i
www.testo.com/en/services/download
Free download testo Smart- Appwww.testo.com/en/services/download 5
Approval and Certification
Product | testo 552i |
---|---|
Mat.-No. | 0564 1552 |
Date | 02.12.2020 |
The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner have the obligation to adhere to these regulations and prerequisites for use, and acknowledge that the re-sale, export, import, etc. in particular in countries without wireless permits, is his responsibility.
Country | Comments |
---|---|
Australia | |
Canada | testo 550s: IC: 61276-05641552 See IC Warnings |
Europa +EFTA | The EU Declaration of Conformity can be found on the test |
homepage www.testo.com under the product-specific downloads.
EU countries: Belgium (BE). Bulgaria (BG). Denmark (DK). Germany (DE).
Estonia (EE). Finland (FI). France
(FR). Greece (GR). Ireland (1E). Italy (IT). Latvia (LV). Lithuania
(LT). Luxembourg (LU). Malta (MT). Netherlands (NL). Austria AT). Poland
(PL). Portugal (PT). Romania (R0). Sweden (SE).
Slovakia (SK). Slovenia (SI). Spain (ES). Czech Republic (CZ).
Hungary (HU). United Kingdom (GB). Republic of Cyprus (CY).
EFTA countries: Iceland. Liechtenstein. Norway. SwitzerlandWEEE Reg. no.: DE
75334352
Hongkong| Authorized
Hongkong| Authorized
Turkey| Authorized
USA| FCC ID: WAF-05641552 See FCC Warnings
Bluetooth ® Information| Feature
---|---
Values
Bluetooth® –
Range/typical 150 m (free field)
radio type Bluetooth ® Low Energy (BLE) 4.2
RF Band 2402 – 2480MHz
power output 15.22dBm
Bluetooth® SIG Listing| Declaration ID D043363
member company Testo SE & Co.KGaA
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.
Caution: Radio Frequency Radiation Exposure This the equipment complies
with IC radiation exposure limits set forth for an uncontrolled environment
and meets the
IC radio frequency (RF) Exposure Guidelines. This equipment should be
installed and operated keeping the radiator at least 20 cm or more away from
the person´s body
in normal use position to ensure compliance with RF exposure requirements.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface.
This is to ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user`s authority to operate the equipment. A
shielded interface cable must be used in order to comply with the emission
limits.
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the
radiator at least 20 cm or more away from the person´s body in normal use
position to ensure compliance with RF exposure requirements.
Co-Location:
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>