elgato 20LAD9901 Key Light Mini Portable LED Panel For Streaming User Guide
- June 6, 2024
- elgato
Table of Contents
Elgato 20LAD9901 Key Light Mini Portable LED Panel For Streaming
Overview
Charging Key Light Mini
Connect Key Light Mini with the supplied USB cable to a 5 V USB charger with min 2.4 A. The charging process will start automatically and the charging level will be shown by the battery status indicator. Once charging is complete (after around 60-100 min) all LEDs will be steadily lit.
Using Key Light Mini
Key Light Mini is in brightness mode by default. Briefly press the jog wheel to enter color temperature mode (Key Light Mini will flash twice), and repeat to return to brightness mode (Key Light Mini will flash once). Push the jog wheel up/down to adjust the intensity of brightness or color temperature.
Installation (Software)
- Download and install the Control Center app for Mac, Windows, iDS or Android.
- Switch on Key Light Mini. It will take approximately 5 seconds to boot up.
- Launch the Control Center app and pair Key Light Mini by clicking the+ icon. For Wi-Fi pairing using a Mac, turn on your Key Light Mini. click the Wi-Fi icon in the top right Status menu, and select your new accessory. After completing the Airport Utility setup process, your Key Light Mini is accessible from Elgato Control Center.
- Use Control Center to switch Key Light Mini on/off, adjust brightness, fine-tune color temperature and configure advanced settings.
Advanced Settings via the Control Center App
If your Key Light Mini is connected to mains all the time, enable Studio Mode to completely bypass the battery. This mode will help to extend the lifetime of your battery and avoid overheating during long hours of operation . Enable Energy Saving Mode to turn off Wi-Fi and dim the light if the battery level is low. Set your personal threshold for activating Energy Saving Mode by adjusting the battery level.
Reset
Power on Key Light Mini. Push and hold the Reset button with a small tool for at least 10 seconds until the light flashes 3 times. Then release the button. Key Light Mini will restart automatically after a few seconds.
Battery Information
We at Elgato care about our environment and put big efforts in product safety
as well as product lifetime when designing this product. Therefore, Key Light
Mini comes with a 12 Watt, state-ofthe- art fast charging circuit with
automatic current limit, capacity limit, temperature threshold and over-
voltage protection. It also offers intelligent Power Path Management to
minimize charging time and maximize efficiency. We use superior battery
chemistry
and do not run the product at the edges of its specs. The product design
offers the opportunity to exchange the battery (battery kit sold separately)
and software settings can help to reduce batterydrain. We at Elgato believe in
ourquality and offer a two-yearbattery warranty under the following
conditions:
- Ensure that you only use chargers with 5 V and 2.4 A or a higher charging current.
- The temperature range for charging, using and storing the product must be in between 5 °C and 35 °C (41 °F and 95 °F).
- Bypass mode should be used whenever possible to preserve battery life.
- Only use this product for its intended purpose. Follow the general and battery safety instructions as described in the user manual. Any misuse can cause electric shock, burns, fire and other hazards or injuries.
- Never burn this product and/or its batteries. Do not expose batteries to direct sunlight or very high temperatures (e.g. hot car, hot stove). Batteries may explode if overheated.
- If the product becomes very hot, gives off a strange smell or changes color, immediately stop using and charging the product.
- Never place products and/or batteries in microwave ovens or on induction cookers.
- Always charge batteries in time.
- Never modify, short-circuit, reverse charge or damage products and/or batteries.
- Do not let battery terminals come into contact with any metal objects to avoid short-circuiting of batteries.
- Do not wrap batteries in metal foil. Tape battery terminals or put batteries in a plastic bag before you discard them.
- Do not expose batteries to any liquids.
- Make sure your hands, the product, and the batteries are dry when handling batteries.
- Avoid contact with the skin or eyes if batteries are damaged or leaking. If this occurs by accident, immediately rinse well with water, and seek medical care.
Warning
Key Light Mini may become hot during prolonged use. Always handle with care.
- If you have an ICO or pacemaker, avoid close or prolonged contact with magnets or their magnetic fields.
- Do not cover Key Light Mini, especially its backplate.
- Do not place on or near a carpet, curtains, or any other flammable materials.
- Be especially cautious when setting up near children.
- Do not attach items to Key Light Mini.
- Do not leave Key Light Mini exposed to direct sunlight or high humidity.
- Do not set up in areas susceptible to strong air currents. Drafts and breezes can cause movement that may result in damage to the product.
- Keep Key Light Mini free from dirt and dust. If it becomes dirty, wipe it lightly with a soft cloth moistened with a little water and mild, neutral detergent. Benzene, thinner, and other volatile agents can cause permanent damage and should never be used for cleaning.
- Only use accessories supplied with the product or sold by the manufacturer.
Wi-Fi 2.4 GHz Max RF e.i.r.p power< 20 dBm, Wi-Fi 5 GHz Max RF e.i.r.p. power<
23 dBm, Temperature range: 0 °C – 45 °C This equipment complies with FCC RF,
IC RSS-102 and CE radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. For indoor use only. Hereby, Corsair Memory Inc.
declares that this device is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EC. The declaration of
conformity for Elgato products is available at
www.elgato.com/doc