Midigitel M1 Smart Sunglasses User Manual
- June 6, 2024
- Midigitel
Table of Contents
Midigitel M1 Smart Sunglasses
COMPONENTS
OVERVIEW
Introduction of Bone Conduction
Safe Listening with Open-ear Solution
A bone-conduction-transducer uses vibration for sound wave transmission to
your skull. The technology lets you hear surrounding sounds while listening to
music, answering phone calls, therefore much safer than traditional earphones,
headphones or earpieces that completely block out the sound around
you.
Product Specification
User Instruction
Power On/Off
- Power On: Press the button for 3 seconds till the blue light is on, and hear a “Dudu” sound.
- Power Off: Press the button for 3 seconds till the red light is on, and hear a “Dudu” sound.
Pairing
Way 1:After power on, press the button for 3 seconds till blue and red lights blink alternately. Glasses make a “Dudu”‘sound which means it IS ready to be paired. Turn on the Bluetooth of the Bluetooth device (such as a Cellphone/Desktop/Laptop/Mac/Tablet PC, etc.) to search and select “M1”. After pairing successfully, the user can play music and make a phone call with glasses freely. Glasses will be off automatically if the connection failed in 15 minutes.
Pairing with a new Bluetooth device
Only under pairing mode could Bluetooth glasses be found and connected to your
Bluetooth device.
Automatic Connection
If glasses have been connected to Bluetooth devices once, it would connect to
the last device automatically after power on. Glasses will be off
automatically if connection failed in 15 minutes.
Volume Up/Down
- Up: Click the button. Warning tone”Dudu” rises when volume comes to Max.
- Down: Click the button.
Music Operation
- Play/Pause: Tap “touch zone” for play/pause.
- Previous song: Slide forwards on “touch zone”.
- Next song: Slide backward on “touch zone”.
Phone-call Answering, Rejecting, or Ending
- Answer a phone call: Slide backward on “touch zone”.
- Reject or End a phone call: Slide forwards to “touch zone”.
- Pick up a new incoming call when you already on a call: Slide backward on “touch zone” to pick up the new call, and the previous call will be hang up automatically.
Voice Control
Press touch zone for 3 seconds to activate voice control (Siri of iPhone,
phonetic assistance of Samsung): press for 3 seconds again to cancel it.
Charging & low battery indication
- Note: Charging voltage is 5V. It is suggested to use 500mA charging current if the charging current is less than 1A. USB cable for charging, the indicator light turns red.
- Low power reminder: LED flashes red and the warning tone “Dudu” rises. Then please charge in time.
- Charging time: About 2 hours. When it is fully charged, the red light turns off.
Safety guide
- Please use this product under the local laws and regulations; Caution safety while driving and cycling in wearing this product.
- To assure your safety, please do not listen to music in a loud volume in some complicated environment.
- Keep it away from kids, because small parts may cause injuries, asphyxia, and so on.
- Pay attention to the warning signs in some special places before using this product, such as hospitals, gas stations, and any potentially explosive environment.
- Do not disassemble or damage the internal battery. Handle the battery under the local regulations. Do not throw it away as waste.
Maintenance issues
- Turn off the power when do not use this product.
- Do not put this product in a liquid or moist place.
- Do not put this product near fire, to avoid explosion.
- Do not bump this product against sharp objects, to avoid scratches or damage.
- Please put this product in a dry place.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet n a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.