ALTEC LANSING MPA-K650 Portable Karaoke Party Speaker User Manual

June 5, 2024
Altec Lansing

ALTEC logo Portable Karaoke Party Speaker
MPA-K650ALTEC LANSING MPA K650 Portable Karaoke Party
Speaker

Warning

The lightning flash with an arrowhead symbol, with an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION RISK OF ELECTRIC SHOCK DOES NOT OPEN
CAUTION: TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to tithe presence of important operating and maintenance (servicing) instructions in the l
the literature accompanying the appliance.

Important precautions:

  1. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
  2. Minimum distances of 100 cm around the apparatus for sufficient ventilation.
  3. The ventilation should not be impeded by covering the ventilation opening with items, such as newspapers, tablecloths, or curtains.
  4. No naked flame sources such as lighted candles should be placed on the apparatus.
  5. When the mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  6. To be completely disconnected from the power input, the mains plug of the apparatus shall be disconnected from the mainstem pletely.
  7. The main plug of the apparatus should not be obstructed or should be easily accessed during intended use.
  8. The use of apparatus in moderate climates.
  9. Attention should be drawn to the environmental aspects of battery disposal.
  10. Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
  11. Excessive sound pressure from earphones and headphones can cause hearing loss.
  12. The internal battery is non-user replaceable.
  13. Do not use this apparatus near the water.

Package contents

1.Speaker x 1
2.Remote control x 1
3.AC power cable x 1
4.User manual x 1| 5.FM Antennax1
6.AUX- in Cablex1
7.Shoulder strapx1
---|---

THE MAIN TECHNICAL PARAMETER

Consumed Power : 17W
1FM: 87.5-108MHz
Speaker Size: 6 Inch x 1
Speaker Impedance: 3Ω x 1
Left&Right Response : 50Hz-20KHz
Input Sensitivity: 500mV
AC Power Supply: 110-240V
Battery: 7.4V/2000mAh

DESCRIPTION OF FRONT PANEL

ALTEC LANSING MPA K650 Portable Karaoke Party Speaker -
PANEL

1. Volume Control
2. MIC Volume Control
3. MIC Echo
4. Display Window
5. Mode(function switch)
6. Play/Pause
7. LED Control
8. Battery Charging Indicator
9. Battery Full Power Indicator| 10. SD Card Jack
11. USB Jack
12. AUX Jack
13. MIC Jack
14. Previous Track
15. Next Track
16. Power On/Off
17. Repeat
---|---

DESCRIPTION OF REAR PANEL

ALTEC LANSING MPA K650 Portable Karaoke Party Speaker - REAR
PANEL1

  1. FM Antenna Jack
  2. AC Power Connect Inlet
  3. AC Power / Charging ON/OFF Switch

DESCRIPTION OF REMOTE CONTROL

ALTEC LANSING MPA K650 Portable Karaoke Party Speaker - REMOTE
CONTROL1

1. Power on/off
2. Mode
3. Mute
4. Volume +/CH5.
Previous Track
6. Scan| 7. 0-9 keys
8. EQ Function
9. Play/Pause
10. Next Track/CH+
11. Volume
12. Repeat
---|---

ALTEC LANSING MPA K650 Portable Karaoke Party Speaker - REMOTE
CONTROL3 To insert the remote control batteries:

  1. Open the battery compartment.

  2. Insert 2 x AAA batteries with correct polarity (+/-) as indicated.
    The 2xAAA battery is not included in our products.

  3. Close the battery compartment.

CAUTION:

  • The danger of explosion if the battery is incorrectly replaced.
  • Replace only with the same or equivalent type.

Getting Started

Connecting Power Cable
Warning : Ensure the AC/Charge switch is in the OFF position before the plugin.Plugin the AC connector into the 110-240V 50Hz inlet socket in the rear panel of the unit and the other end into the standard AC 120V wall socket.

  1. Do not plug or unplug the power cable while you have wet hands.
  2. To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug the power cable from the wall outlet.
  3. When unplugging the power cord from a wall outlet, always pull on the power plug only.
    Never unplug it by pulling the power cord.

Charging the internal Battery
The speaker comes with a built-in rechargeable battery, follow the below steps to charge it:

  1. Connect the power cable and plug it into the 110-240V 50Hz wall socket on the rear panel.
  2. Turn the AC/Charge switch to “ON” position located at the back of the unit.
    The Red charging LED indicator on the front panel will light up, and the battery is being charged.
    3. When the Red LED indicator light off, the battery is fully charged when the green LED indicator lights up, unplug the power cable to stop charging.

Note: please fully charge the product when it is not going to be used for a long time and charge once a month to keep a longer battery life.
Turning ON/OFF the speaker

  1. The speaker can work with either connected AC power input (AC mode), or DC power by build-in battery(DC mode).
  2. AC mode, connect the AC power cable provided to a wall socket. The speaker will be powered by AC power. Set both AC switch on the rear panel and DC to switch on the front panel to ON position.
  3. In DC mode, the speaker will be powered by the built-in rechargeable battery. Set the DC mode to the ON position.
  4. Use the remote control to turn it into Standby mode, and press it again to power it on.
  5. Set the Power switch to the OFF position on the front panel to turn off the speaker.

Function Instructions

USB Operation
This unit has a USB port for playback of MP3 music.

  • Insert your USB device into the USB port and the unit will start playing automatically.
    Press the [MODE] button to USB mode is selected.

  • Press the or key to the previous or next track.

  • Press the button to play or pause music

  • Press the button on the remote to repeat the current track, and press it again to repeat all tracks.

FM Radio Function
This Party Speaker comes with FM Radio Function.
Connect the FM Antenna to the “FM ANT” port at the rear panel.
Press the [MODE] button repeatedly until the FM function is selected.
Press the button on the remote control or the press play button on the front panel to scan the FM station automatically.
Press the to select the previous or next radio station.
Note: The performance of the Radio station will affect by the different places of the Party Speaker or different weather.ALTEC LANSING MPA K650
Portable Karaoke Party Speaker - REAR PANEL

Bluetooth mode

  1. Press the MODE button on the Top Control panel or on the remote control to switch to the Bluetooth mode.
  2. Once on the Bluetooth mode, “bLUE ” will be displayed on the screen and is flashing in the top right corner.
  3. Open the Bluetooth on the external device and search the Bluetooth device name “42686781” to pair.
  4. Press connect to “PAIR” with the Party Speaker.
  5. Once connected, you can hear a small sound from the unit, and it will static on the top right corner, you can play the music with the speaker.
  6. You can use the or button on the front panel to control the songs of the external device.

Note: This model does not need a password.

Connect with AUX Line in

Connect with AUX Line in

  1. Press【MODE】Button on the Top Control panel or on the remote control to switch to the AUX LINE in mode, Line will be displayed on the screen.
  2. Connect this unit AUX by inserting the jack and the device Earphone jack by provided AUX cable (included) Once connected, turn on your external device.
  3. Once connected, turn on your external device and play music.

C aution: Please turn off the unit before connecting AUX cable in order to avoid unexpected noise.![ALTEC LANSING MPA K650 Portable Karaoke Party Speaker

Connect with Wired Microphone

Connect to Wired Microphone

Insert a 6.35mm wired microphone, and use the control knob to adjust the sound level.

When playing with the wired microphone, please use this knob to adjust the volume of the microphone.

When playing with the wired microphone, please use this knob to adjust the echo volume of the microphone.
Important Notes
While using the microphone, avoid being put the microphone opposite the bass of the Party Speaker, as they may have Whistler Noisy.
To get the best singing performance, keep the microphone within 5-15cm of the mouth and at a 45-degree angle.
When using the microphone, always pay attention to the battery.
If the battery is low, the indicator light will come on and the performance will progressively become poor.
Caution: Please do not put the microphone directly face to the Party speaker, it may damage the speaker.

FCC Warning

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.ALTEC
logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Altec Lansing User Manuals

Related Manuals