RISC GROUP RW332KF1 Panda 4-Button 2-Way Keyfob User Guide
- June 5, 2024
- RISC GROUP
Table of Contents
RISC GROUP RW332KF1 Panda 4-Button 2-Way Keyfob
Introduction
RISCO Group’s new Wireless 2-Way Keyfob / Remote Control combine the most advanced technologies within a contemporary, compact and streamlined design, the ideal choice for homeowners seeking the highest security standards. The keyfob / remote control has been designed for use in family homes, apartments or small offices. This accessory is easy to configure, and is compatible with all RISCO Group’s wireless intrusion systems.
How it works
The principal function of the Keyfob / Remote Control is to provide users with a convenient way to control the security system. This accessory is easy to use with large keys and is typically used for arming and disarming as well sending a panic alarm to the system. Being bi-directional enables each command that is sent to the panel to receive a reply status from the panel and indicate the status to the user via the color LEDs. The Keyfob / Remote Control can be mounted on a chain or worn as a pendant.
Main features
- Bi-directional wireless communication
- Up to 200 m (650 feet) range
- Simple battery replacement
Operation
Status LED Indications
The LED lights up after each press, indicating a successful signal
transmission. 
Configuration
Allocating the Keyfob / Remote Control to the receiver
The 2-Way Keyfob / Remote Control must identify itself with the system
receiver. Allocation can be done by entering the keyfob’s 11-digit serial
number into the system or by using RF mode.
To allocate the Keyfob / Remote Control:
- Set the system receiver to Learn Mode.
- Send an allocation message:
RF – Press the + keys for at least 2 seconds. Code – Enter the 11-digit serial number into the system. In both instances the system receiver will automatically recognize the Keyfob / Remote Control and an allocation message will sound. The LED on the Keyfob / Remote Control will blink.
Cleaning and Maintenance
Cleaning the Keyfob / Remote Control
Clean the Keyfob / Remote Control with a dry or damp cloth to remove dirt or
dust. Do not expose the keys directly to liquid.
Replacing the Keyfob / Remote Control battery
- Using a small screwdriver, twist to open the Keyfob / Remote Control (see Figure 1).
- Remove the old battery.
- Press any one of the keys.
- Insert the new battery (see Figure 2).
- Close the Keyfob / Remote Control cover (see Figure 3).
Replace the batteries once a year or whenever the low battery LED indicates.
Technical Information
SPECIFICATIONS
- Range: Up to 200m (650 feet) range (LOS)
- Frequency: 433.92, 868.65, 915 MHz
- Battery Type: CR2430, 3V lithium, 280 mA
- Power Output: 868.65MHz: 10 mW
- Typical Battery Life: 4 years
- Low Battery Threshold: 2.5V
- Quiescent Current Consumption: 4 µA
- Maximum Current Consumption: 30 mA
- Dimensions: (H x W x D)
- Operating temperature: -10 C to 55 C (14 F to 131 F)
- Average Relative Humidity: 75%
- Weight: 20 gram (0.7 oz.)
- Standard Compliance: EN 50131-1, EN 50131-6 Type C and EN50131-3 Grade 2 Environmental Class II, Type A ACE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>