BETUS B088WMM2KN Digital Travel Alarm Clock User Manual
- June 5, 2024
- BETUS
Table of Contents
DIGITAL TRAVEL ALARM CLOCK USER MANUAL
POWER ON : Pull plastic insulator strip to activate battery (included). SETTING
-
SET TIME FORMAT: In time mode, press the “12/24” button to change the time format between 12-hour and 24-hour.
-
SET TIME: In time mode, press the “SET” button to enter into time setting mode by following the sequence of
hours, minutes, years, months, days & exit. Press the “UP” and “DOWN” buttons to set up your desired time and date. Please ensure you set the correct year, otherwise, the date/day will display incorrectly. -
ALARM SETTING: Press the “MODE” button to enter into alarm setting mode. Then press the “SET” button to set hours, minutes, snooze, and alarm tone in sequence. (Press the “UP” and “DOWN” buttons to choose your desired time, snooze time, and alarm).
TURN ON/OFF ALARM & SNOOZE: In alarm mode, press the “DOWN” or “UP” button to turn on/off the alarm and snooze. When the alarm goes off, it will ring for 1 minute. When Snooze is set up. Snooze will work ONLY twice. During an alarm, press any button (except “set”) to snooze, and press “SET” to discharge. -
COUNT-DOWN: Press “TIMER” to enter into timer setting mode. Press the “SET” button to set hours, minutes, and seconds in sequence. Press the “UP” and “DOWN” buttons to adjust. Then press the “TIMER” button to start or pause the timer.
-
SWITCH TEMPERATURE UNIT: Press the “C/F” button to change the temperature unit.
-
BACKLIGHT: Tap the black switch of the backlight to turn it on the backlight. The light will turn on for 7-10 seconds.
REPLACE BATTERY: Pull out the battery compartment, and replace the old
battery with a new one. (The negative side of the battery should be face-up).
Then Push the compartment back.
WARNING! DO NOT PRESS THE LCD SCREEN
MORE QUESTIONS OR CONCERNS?
FEEL FREE TO CONTACT THE CUSTOMER SUPPORT!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>